CT10-1003BXM AAC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
American Accurate Components, Inc. Thin Film Precision Chip Resistors
188 Technology Drive, Unit H, Irvine, CA 92618
TEL: 949745379888 /rhombus4 FAX: 949745378889 /rhombus4 Email: sales@aacix.com SCHEMATIC DIMENSIONS (mm) Wraparound Termination Size L W c d t CONSTRUCTION FIGURE (Wraparound) CONSTRUCTION MATERIALS Item Part Material /onesansinv Resistor Nichrome Thin Film /twosansinv Protective Film Polymide Epoxy Resin /threesansinv Electrode /threesansinva Grounding Layer Nichrome Thin Film /threesansinvb Electrode Layer Copper Thin Film /threesansinvc Barrier Layer Nickel Plating /threesansinvd Solder Layer Solder Plating (Sn) /foursansinv Substrate Alumina /fivesansinv & /sixsansinv Marking Epoxy Resin The resistance value is on the front side The production month is on the backside The content of this specification may change without notification 05/15/2015 HOW TO ORDER CT 10 - 1003 B X M Packaging M = Std. Reel O = Cutting Tape TCR (PPM/ °° °°C) L = + 1 P = + 5 Y = + 50 M = + 2 Q = + 10 Z = + 100 N = + 3 X = + 25 Tolerance (%) EIA Resistance Value Standard decade values Size 01=2512 05=0402 10=0805 10P=0805P 11=2020 12=2010 13=1217 14=1210 16=0603 16P=0603P 18=1206 18P=1206P 20=0201 Series CT = Lead Free Thin Film Precision Resistors Sn Termination
FEATURES
/square6 High Power Available 0603P 1/8W, 0805P 1/4W, 1206P 1/2W /square6 Nichrome Thin Film Resistor Element /square6 Anti7Leaching Nickel Barrier Terminations /square6 Very Tight Tolerances, as low as ±0.01% /square6 Extremely Low TCR, as low as ±1ppm /square6 Reference Standard = IEC 6011578, JIS C 520178
American Accurate Components, Inc. Thin Film Precision Chip Resistors TEL: 949745379888 /rhombus4 FAX: 949745378889 /rhombus4 Email: sales@aacix.com
ELECTRICAL CHARACTERISTICS
at 70 °° °° (W) Resistance Range ±± ±±% Tolerance TCR (10 -6 /°° °°C) Working Voltage Overload Voltage Operating Temp Range 0201 0.05 25V 50V 755 °C ~ +125 °C 1K ~ 10K 0.05 ±10 0402 0.063 50V 100V 755 °C ~ +125 °C 0603 0.063 0.100 10.0 ~ 100K 75V 150V 755 °C ~ +125 °C 102K ~ 270K 0.05, 0.1, 0.25, 0.5, 1 10, 25, 50 755 °C ~ +125 °C 274K ~ 360K 0.1, 0.25, 0.5, 1 10, 25, 50 0603P 0.125 75V 150V 755 °C ~ +125 °C 10 7 390K 0.1, 1.0 ±10, ±25, ±50, ±100 0805 0.100 100V 200V 755 °C ~ +125 °C 205K ~ 360K 0.05, 0.1, 0.25, 0.5 10, 25, 50 365K ~ 487K 0.05, 0.1, 0.25, 0.5 10, 25 499K ~ 1.00M 0.1, 0.5 25 0805P 0.250 150V 300V 755 °C ~ +125 °C 1206P 0.500 1.0 7 9.1 0.5, 1 ±50, ±100 150V 300V 755 °C ~ +125 °C 1210 0.250 100 ~ 330K 0.1 ±5, ±10 200V 400V 755 °C ~ +125 °C 51.0 ~ 2.00M 0.1, 0.5 ±25 2010 0.250 150V 300V 755 °C ~ +125 °C 10.0 ~500K 0.01, 0.05 ±25 2512 0.500 150V 300V 755 °C ~ +125 °C 10.0R ~ 500K 0.01, 0.05 ±25 10.0R ~ 500K 0.01, 0.05 ±50 * Rated Voltage: √PxR
American Accurate Components, Inc. Thin Film Precision Chip Resistors TEL: 949745379888 /rhombus4 FAX: 949745378889 /rhombus4 Email: sales@aacix.com PERFORMANCE & ENVIRONMENTAL SPECIFICATIONS Test Item Maximum ∆ Ω +0.05 Ω (Tolerance) Condition A B, C D, F Short Time Overload ± 0.1% ± 0.1% ± 0.5% 2.5 times of the rated voltage shall be applied for 5 seconds Load Life ± 0.1% ± 0.25% ± 0.5% The resistor shall be subjected to rated voltage for 90 min. followed by a pause of 30 min. at a temperature of 70±3ºC. This constitutes 1 cycle. Cycles shall be repeated for 1000 hours. Moisture Load Life ± 0.1% ± 0.25% ± 0.5% The resistor subjected to rated voltage for 90 min followed by a pause for 30 min at a temperature of 60±2ºC with relative humidity of 90% to 95%. This constitutes 1 cycle. Cycles shall be repeated for 1000 hours. 5 continuous cycles Resistance to Solder Heat ± 0.05% ± 0.1% ± 0.5% The resistor shall withstand dipped into solder for 10±1 sec. At 260±5ºC Terminal Strength ± 0.1% ± 0.1% ± 0.5% Distance bet ween fulcrums: 90mm; Bending width: 3 mm Solderability A new uniform coating of solder shall cover minimum of 95% of surface being immersed The resistor shall be dipped into the solder of 235±5ºC for 3±0.5 seconds Insulation Resistance DC 500V for 1 minute 1000 Meg Ω or over VALUE MARKING For those parts ordered with an E724 value, the product will be marked with a 3 digit code. For those products ordered with an E796 value, the product will be marked with a 4 digit code. For those parts which fall under E796 and E724 values (e.g. 1K ohm is both an E796 and E724 value), the part will be marked with a 3 digit code; 4 digit markings for this type is available upon special request. 0201, and 0402 Size No marking E724 & E796 Values Custom Value Any Size
0603 Size
EIA 96 Digit Code of 3.32K ohm E796 Values 0603 ~ 2512 Sizes EIA 3 Digit Code of 10K ohm resistor E724 Values, E796 Values 0805 ~ 2512 Sizes EIA 4 Digit Code of 121K ohm resistor E796 Values LABEL DESCRIPTION One side surface of a reel is marked with a label with the following items of information. 1. Chip Resistor 2. Part Number 3. Tolerance 4. Quantity 5. Lot number for production month/year* 6. Manufacturer’s name or symbol * The suffix “L” indicates that this item is lead f ree. As of September 2004, all new production items of the series CR and CJ are no lon ger containing tin/lead (SnPb) terminals; they are lead free and in compliance wit h Lead Free/RoHS. PACKAGE QUANTITY Type 0201 0402 0603 0805 1206 M 5,000 10,000 5,000 5,000 5,000 O 1,000 1,000 1,000 1,000 1,000 Type 1210 1217 2010 2020 2045 2512 B 5,000 2,000 4,000 2,000 3,000 4,000 O 1,000 1,000 1,000 1,000 1,000 1,000 REEL SCHEMATIC & DIMENSIONS (mm ) O & M Type M Type 7” Reel 13” Reel E 60 ±0.5 100 ±0.2 Reel size is dependent upon the package quantity& resistor size. Call for more info. TAPE SCHE MATIC TAPE DIMENSIONS (mm) 0201 0402 0603 0805 1206 T p 0.4+ 0.05 0.40 ±0.05 1210 1217 2010 2020 2045 2512 51B 1213 103