CSW-24 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Compact and Lightweight – The CSW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so it won’t weigh you down.
  • At-a-Glance Status – The inverter’s status can be determined at a glance with the easy to read LED light.
  • Digital Display – The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes.
  • USB Port – Power and charge your USB-enabled device with the available USB port.
  • GFCI AC Outlet – Plug in two pieces of equipment directly to the CSW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability. Options
  • Remote Switch – Use the optional CSW-RS remote switch for even easier on/off access away from the inverter. The CSW-RS comes with a 20’ cable. Introduction The Magnum-Dimensions CSW-24 Series inverter from Sensata Technologies is a pure sine wave inverter designed to be powerful, yet simple to operate. The CSW will provide you with reliable AC power for troublefree use. Model Numbers
  • CSW2024 Available For
  • Emergency Medical Services
  • Marine Systems
  • Military Vehicles
  • RV Systems
  • Trucks
  • Utility Vehicles Available Accessories
  • Remote Switch (CSW-RS) Pure Sine Wave 24 2000 VA Battery Voltage Options Continuous Output Options

Copyright © 2019 Sensata Technologies, Inc. www.sensata.com SPECIFICATIONS CSW2024 INVERTER SPECIFICATIONS - OUTPUT Continuous power at nominal DC voltage 2000 watts Peak surge power 4000 watts AC output voltage at 24.0 VDC 120 VAC ± 5% AC ouput current 16.6 AAC AC output frequency 60 Hz ± 0.5 Hz AC output waveform Pure sine wave Total harmonic distortion (THD) < 3% USB 5V, 2.1 A INVERTER SPECIFICATIONS - INPUT Nominal DC input voltage 25.0 VDC DC input voltage range 21.0 - 31.0 VDC Input current 97 DCA No load draw - Power Save off .8 ADC No load draw - Power Save on .3 ADC Optimum efficiency > 90% High voltage shutdown 31.0 VDC Low voltage alarm 22.4 VDC, audible Low voltage shutdown 21.0 VDC GENERAL FEATURES AND CAPABILITIES Transfer relay capability NA Display status indictator LED: Status Digital display Input voltage, output power, warning, and error code AC receptacles NEMA 5-20 (GFCI) Listings Conforms to UL458, Certified to CSA 22.2, 107.1 Warranty One year ENVIRONMENTAL SPECIFICATIONS Operating temperature 0° C to +40° C (32° F to 104° F) Nonoperating temperature -20° C to +60° C (-4° F to 140° F) Operating humidity 0 to 90% RH non condensing Max operating altitude 9843’ (3000 m) above sea level PHYSICAL SPECIFICATIONS Shipping dimensions (l x w x h) 19” x 11.3” x 6.7” (48.3 cm x 28.7 cm x 17 cm) Mounting Shelf (top or bottom up) or bulkhead (DC terminals MUST be facing up) Weight 11.5 lb (5.2 kg) Shipping weight 13 lb (5.9 kg)

InverterInfo@sensata.com Power Conversion www.magnum-dimensions.com Page 3 Rev: 07/20/19 Part#64-0680 vB Copyright © 2019 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. www.sensata.com AGENCY APPROVALS & CERTIFICATIONS

  • Conforms to UL458, Certified to CSA 22.2, 107.1 Testing for specifications at 25° C. Specifications subject to change without notice. GENERAL NOTES