CSU1300AP ADVANCEDENERGY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
©2020 Advanced Energy Industries, Inc. ARTESYN CSU1300AP
1300 Watts Distributed Power System
Total Output Power:
1300 W continuous
Wide Input Voltage: 90 - 264 Vac; 180 - 300 Vdc DATA SHEETAdvanced Energy's Artesyn CSU1300AP power supply is housed in a 1U high rack-mount enclosure measuring is significantly narrower and shorter than that of similarly rated earlier generation power supplies — freeing up valuable system space — and is achieved by use of the latest power switching technology and high density component packaging techniques. This form factor conforms to the standard market's Common Redundant Power Supplies. SPECIAL FEATURES 1300 W output power High power and short form factor 1U power supply High density design: 39 W/in Active Power Factor Correction EN61000-3-2 Harmonic compliance Inrush current control 80 PLUS® Platinum efficiency N+M redundant N+M ≤ 4 Hot-pluggable Active current sharing Full digital control PMBus® compliant EN61000-4-5 surge level 1 kV/2 kV DM/CM Compatible with Artesyn’s Universal PMBus GUI COMPLIANCE Conducted/Radiated EMI Class A EN61000-4-11 SAFETY UL/cUL UL + CB Report CE Mark CCC BSMI KC TÜV
2 advancedenergy.com CSU1300AP ELECTRICAL SPECIFICATIONS Input Input range 90 - 264 Vac / 180 - 300 Vdc Frequency 47 Hz to 63 Hz Efficiency 80 PLUS® Platinum efficiency Max input current 8.5 Arms @ 180 Vac; 12.5 Arms @ 100 Vac Inrush current 25 Apk Conducted EMI Class A Radiated EMI Class A Power factor >0.9 beginning at 10% load ITHD 20% beginning at 10% load; 8% at 20% load Leakage current 1.75 mA Hold-up time 11 ms at full load Output Main DC Output Standby DC Output MIN NOM MAX MIN NOM MAX Nominal setting (12 V / 1 A, 12 VSB / 0.1 A) Total output regulation range 11.8 V 12.6 V 11.4 V 12.6 V Dynamic load regulation range 11.6 V 12.6 V 11.4 V 12.6 V Output ripple 120 mV 120 mV Output current 1 Hi line: 108.3 A Lo line: 83.3 A 0 3 A Current sharing beginning at 20% loading N/A Capacitive loading 2200 µF 22000 µF 100 µF 3100 µF Start-up from AC to output 3000 ms 1500 ms Output rise time NA 25 ms NA 70 ms Protections (Main Output) Minimum Nominal Maximum Units Comment Peak current 115 % Output OCP 120 140 % Dynamic loading setup ±5 % 60% rated load step, 1.0 A/µs slew rate; 2200 µF / 1 A min Output OVP 13.5 15 V Latch Output UVP 9.5 11.0 V Recovery Overtemperature protection Yes Fan fault protection Yes Standby Output Output OCP 4.0 5.0 A Output OVP 13.5 15 V Dynamic loading setup ±5 % 1 A rated load step Slew rate: 0.5 A / µs / 1000 µF
advancedenergy.com 3 CSU1300AP LED Indicators POWER SUPPLY CONDITION LED STATE Normal work GREEN No AC power to all power supplies OFF AC present / Only 12 VSB on (PS off) or PS in CR state 1 Hz Blink GREEN AC cord unplugged; with a second power supply in parallel still with AC input power RED Power supply warning events where the power supply continues to operate; high temp, high power, high current, slow fan, input voltage lower than 90 Vac (not warning above 90 V condition, must be warning state below 85 V condition)
1 Hz Blink RED
Power supply critical event causing a shutdown; failure, OCP , OVP , fan fail RED Firmware Reporting And Monitoring Accuracy Range Output loading 10% to 20% > 20% to 50% > 50% to 100% READ_PIN and READ_EIN ±5 W ±2% ±2% READ_IOUT ±5% ±2% ±2% READ_TEMPERATURE ±3 °C Description Min Max Unit Tvout_rise 12 V main output voltage rise time 5.0 25 ms
12 VSB output voltage rise time NA 70 ms
Tsb_on_delay Delay from AC being applied to 12 Vsb being within regulation 1500 ms Tac_on_delay Delay from AC being applied to all output voltages being within regulation 3000 ms Tvout_holdup Time 12 VI output voltage stay within regulation after loss of AC 11 ms Tpwok_holdup Delay from loss of AC to de-assertion of PWOK 10 ms Tpson_on_delay Delay from PSON# active to output voltages within regulation limits 5 400 ms Tpson_pwok Delay from PSON# deactivate to PWOK being de-asserted 5 ms Tpwok_on Delay from output voltages within regulation limits to PWOK asserted at turn on 100 500 ms Tpwok_off Delay from PWOK de-asserted to output voltages dropping out of regulation limits 1 ms Tpwok_low Duration of PWOK being in the de-asserted state during an off/on cycle using AC or the PSON signal 100 ms Tsb_vout Delay from 12VSB being in regulation to O/Ps being in regulation at AC turn on 50 1000 ms T12VSB_holdup Time the 12VSB output voltage stays within regulation after loss of AC 70 ms ELECTRICAL SPECIFICATIONS (CONTINUED) TIMING SPECIFICATIONS
4 advancedenergy.com CSU1300AP TIMING DIAGRAM ENVIRONMENTAL SPECIFICATIONS Operating temperature 0 to 55 °C Operating altitude up to 5000 m Operating humidity +5% to +90% non-condensing Storage temperature -40 °C to +85 °C, non-condensing Storage humidity +5% to +95% non-condensing Non-operating altitude up to 15,200 meters Vibration and shock Standard operating/non-operating random shock and vibration RoHS compliance Yes MTBF 250,000 hours at 40 °C ambient at full load
advancedenergy.com 5 CSU1300AP MECHANICAL OUTLINE POWER SUPPLY OUTPUT CARD EDGE Status LED
6 advancedenergy.com CSU1300AP CONNECTOR DEFINITIONS
ORDERING INFORMATION
Output connector part number Card-edge Mating connector part number 2x25 pin configuration of the FCI power card connector 10035388-102LF Model number Airflow Nominal Output Voltage Regulation Band Minimum Current Maximum Current Output Ripple P/P Standby CSU1300AP-3-600 Normal fan 12.2 Vdc 11.6 - 12.6 Vdc 1 A Hi line: 108.3 A Lo line: 83.3 A 120 mV 12.0 V @ 3 A Output Connector Pin Configuration Pin Name Pin Name A1-A9 GND B1-B9 GND A10-A18 +12 V B10-B18 +12 V A19 SDA B19 A0 (SMBus address) A20 SCL B20 A1 (SMBus address) A21 PSON B21 12 VSB A22 SMBAlert# B22 CR_BUS# A23 -VSENSE B23 12 V load share A24 +VSENSE B24 Present A25 PWOK B25 VIN-GOOD
ENG-CSU1300AP-235-01 12.09 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2020 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.