CSS500 TDK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-526-2324 29

‹ High Efficiency ‹ Uses less energy ‹ Current Share and ORing FET ‹ Use in redundant applications ‹ Dual input fuses ‹ Easier system compliance Feature Benefit Medical Test and Measurement ‹ 360W Convection rating ‹ High Efficiency ‹ IEC60601-1 or IEC60950-1 certifications ‹ ORing FET & Current Share Key Market Segments & Applications Features and Benefits 500W AC-DC Medical or Industrial Power Supplies CSS500 ITEMS Input Voltage range - 90 - 264VAC (47 - 63Hz) Inrush Current A <50A maximum at 230VAC input, 25°C ambient cold start Input Current (115/230VAC) A 6 / 3A Power Factor Correction - Meets EN61000-3-2, >0.9 Leakage Current µA <300µA 264VAC 63Hz Hold Up Time (Typ) ms 20ms at 115VAC input, 360W loading Temperature Coefficient - ±0.04%/°C Voltage Accuracy % ±1% at 60% load Adjustment Range % None Total Regulation - ±5% Ripple & Noise % 1% peak to peak (5Vsb also) Overcurrent Protection - 110 - 150% Overvoltage Protection V 110 - 130% of nominal (Cycle input power or use remote on/off to reset) Overtemperature Protection - Yes (Cycle input power or use remote on/off to reset) Remote On/Off - Unit on: Floating or high 3.5 - 5.25V , Unit off: Low or <0 - 0.5V Efficiency % 87% to 92%, model & input dependant Standby Voltage - 5V 1A (5V 0.25A when convection cooled or when inhibit is activated) Fan Output - 12V 1A Current Share - Single wire, up to 4 units can be shared within 10% accuracy at full load DC Good & Fan Fail Signals - Both Low on Fail ORing FET - Yes, for redundant operation Operating Temperature °C Convection (U channel): 0 to +70°C, derate linearly to 35% load from 40 to 70°C Forced air (or internal fan): 0 to +70°C, derate linearly to 50% load from 50 to 70°C Storage Temperature °C -10 to +85°C Humidity (non condensing) % 10 - 95% RH Cooling - Convection or forced air (30CFM or 3.1m/s). Internal fan is temperature controlled Withstand Voltage (1) - Input to Ground 1.5kVAC, Input to Output 4kVAC(1), Output to Ground 500VAC for 1 min. Isolation Resistance - >20M at 25°C & 70%RH, Output to Ground 500VDC Vibration (non operating) - 19.6m/s 2 (10~55Hz:2G Constant, X,Y,Z 60min each.) Shock - < 196.1 m/s 2 (20G) Safety Agency Approvals - Medical Version: UL60601-1, IEC60601-1, Industrial Version: UL60950-1, EN60601-1, CE Mark Conducted & Radiated EMI - Medical Version: EN55011-B, FCC Class B, Industrial: EN55022, FCC Class B Immunity - Medical Version: EN60601-1-2, Industrial: EN55024 MTBF - >68,695 (MIL-217F-HDBK) Weight (Typ) g 340g (U channel) Warranty yr Two Years Specifications Note (1) Industrial version (I suffix): 3kVAC

3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-526-232430

CSS500-12 12V 30A 360W 41.67A 500W CSS500-24 24V 15A 360W 20.84A 500W CSS500-30 30V 12A 360W 16.67A 500W CSS500-36 36V 10A 360W 13.89A 500W CSS500-48 48V 7.5A 360W 10.42A 500W CSS500-54 54V 6.67A 360W 9.26A 500W CSS500-57 57V 6.32A 360W 8.78A 500W Output Maximum Maximum Maximum Maximum Model Voltage (V) Curr. Conv. (A) Power Conv. (W) Curr. Forced Air Pwr Forced Air Blank Yes - - Yes - /S - Yes - Yes - /T - - Yes Yes - I Yes - - - Yes /SI - Yes - - Yes /TI - - Yes - Yes Mechanical Safety Certifications Suffix U channel End Fan Top Fan Medical Industrial Revision A3: Apr 2011 For Additional Information, please visit us.tdk-lambda.com/lp/products/css-series.htmKM 15 - 40W pcb mount medical CSS65, 150 40 - 150W open frame NV175 175 - 200W 1-4 outputs NV300 300W 1-4 outputs Other Medical AC-DC Products FAN1 CN5 8.25 50.85 8.25 26.75 CN1 CN4 POWER GOOD GND GND FAN FAULT FAN FULL SPEED CN5 P2.54-2*3P Molex P/N:90122-0123 OR Equivalent CN3 P2.5-6P (OPTION) Molex P/N:48152-0610 OR Equivalent PIN1 PIN2 PIN3 PIN4 PIN5 PIN6 GND Current Share Inhibit 5Vsb -Sensor +Sensor CN2 P2.5-2P Molex P/N:48152-0210 OR Equivalent PIN1 PIN2 5Vsb GND FAN1 P2.5-2P Molex P/N:48153-0210 OR Equivalent 12V FAN + 12V FAN - PIN1 PIN2 FAN2 P2.5-2P (With speed control) Molex P/N:48152-0210 OR Equivalent FAN + FAN - PIN1 PIN2 ACN ACL FC N.C 203.2 12.7 8.9 12.7 8.9 12.7 8.4 12.7 8.9 19.0 8.9 8.9 19.0 93.1 185.4 185.4 19.012.0 4-M3P0.5 2-M3P0.5 CN4 FAN2 CN2 CN3 CN1 Recommended direction for force airflow 38.5 118.5 Q7Q6 Outline Drawings Options