CSA09034 DAICO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Rev. N/D / Iss.1 MODEL NO. CSA09034 SP4T Switch Assembly

FEATURES

1.0 dB Insertion Loss Amplitude and Phase Balanced

2 Line TTL Control

Four Integrated SP4T Switches HDI DA ICO I ndustries J2 J2 J2 J2 J1 J1 J1 J1 S4 S3 S2 S1 0.60 0.42 0.60 1.20 1.800.18 J3 J3 J3 J3 1.20 J5 J5 J5 J5 J4 J4 J4 J4 S1 S2 S3 S4 ESD SYMBOL SHALL BE IAW MIL-STD-1285 0.60 0.42 0.60 1.20 1.80 2.40 0.18 1.75

0.25 REF

2.42 1.790.02 REF SMA CONNECTORS JACK

20 PLACES

Parameter Min Typ Max Units Conditions Operating Frequency 1 1200 MHz DC Current 26 43 mA At +5 VDC Supply 46 53 mA To -15 VDC Supply Control Type TTL See Logic Table Control Current High µA VIH = +2.7 V Low µA VIL = +0.5 V Insertion Loss 1.0 1.5 dB 1 - 100 MHz 1.5 2.0 dB 100 - 1200 MHz Amp Balance ±0.1 ±0.3 dB Port to Port, Ref J4 Phase Balance ±1.0 ±2.0 DEG Port to Port, Ref J4 Isolation 70 80 dB VSWR Thru 1.15/1 1.25/1 Termination 1.25/1 1.5/1 Impedance 50 OHMS Switching Speed 6.3 10 µSec 50% TTL to 90% / 10% RF Transition (Rise/Fall) Time 3.0 µSec 10% / 90% to 90% / 10% RF Switching (Video) Transients -74 -70 dBm Intercept Points 2nd +70 +76 dBm 1 - 20 MHz +80 +100 dBm 20 - 1200 MHz 3rd +35 +38 dBm 1 - 20 MHz +40 +58 dBm 20 - 1200 MHz RF Power Operate +15 +12 dBm 1 - 2 MHz (0.1 dB Comp.) +17 +15 dBm 2 - 20 MHz (0.1 dB Comp.) +30 +20 dBm 20 - 1200 MHz (0.1 dB Comp.) No damage +30 dBm Operating Temperature 0 +25 +75 °CT A GUARANTEED PERFORMANCE TYPICAL SCHEMATIC FOR S1 - S4 LOGIC GND (DC RET) SW-01 “0” SW-02 “0” STROBE (STB) “0” +15V -15V COMMON TO S1, S2, S3, S4 COM Ω Ω Ω Ω

2.50 MAX

CONN, MDM-9PH025P WITH JACKPOSTS (OR EQUIVALENT) 7.00 / 6.50 STRAIN RELIEF PROVIDED INTERNALLY .19 X .15 REF .40 MAX (9) 26 AWG STRANDED WIRES (PART OF CONNECTOR) WITH SLEEVING LOGIC TABLE Strobe SW-02 SW-01 Function Switch 00 0 J5 To J1 S1 - S4 00 1 J5 To J2 S1 - S4 01 0 J5 To J3 S1 - S4 01 1 J5 To J4 S1 - S4 Last State When S1, S2, S3, S4 1X X Strobe was at a as Required Low Level See J6 Chart X = Don’t Care