CS9201 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • NOCAP
  • Low Quiescent Current (450 µΑ typ. @ 100 µA load)
  • 5.0 V , ±2% Output
  • 100 mA Output Current Capability
  • Fault Protection – 74 V Peak Transient V oltage – –15 V Reverse V oltage – Short Circuit – Thermal Shutdown – Overvoltage Shutdown
  • Internally Fused Leads Current Source (Circuit Bias) Voltage Shutdown Over NOCAP Current Limit Sense Thermal Shutdown Bandgap Reference VOUT Sense(1) GND VIN + – Error Amplifier (1) Contact factory for optional Sense lead.

Figure 1. Block Diagram

ORDERING INFORMATION

CS9201YDF8 SO–8 95 Units/Rail CS9201YDFR8 2500 Tape & ReelSO–8 SO–8 DF SUFFIX CASE 7511 NCNC CS920 ALYW1 GNDGND GNDGND VINVOUT PIN CONNECTIONS AND MARKING DIAGRAM A = Assembly Location WL, L = Wafer Lot YY, Y = Year WW, W = Work Week

http://onsemi.com MAXIMUM RATINGS* Parameter Value Unit Power Dissipation Internally Limited– Input Voltage (VIN): DC Peak Transient Voltage (60 V Load Dump @ VIN = 14 V) –15 to 36 V V Output Current Internally Limited– ESD Susceptibility (Human Body Model) 4.0 kV Package Thermal Resistance: Junction–to–Case, RθJC Junction–to–Ambient, RθJA 110 °C/W °C/W Junction Temperature –40 to +150 °C Storage Temperature –55 to +150 °C Lead Temperature Soldering: Reflow (SMD styles only) Note 1 230 Peak °C 1. 60 second maximum above 183°C. *The maximum package power dissipation must be observed. ELECTRICAL CHARACTERISTICS (6.0 V ≤ VIN ≤ 26 V, IOUT = 1.0 mA, –40°C ≤ TJ ≤ 125°C; unless otherwise stated.) Parameter Test Conditions Min Typ Max Unit Output Stage Output Voltage, VOUT 9.0 V < VIN < 16 V, 100 uA ≤ IOUT ≤ 100 mA

6.0 V < VIN < 26 V, 100 uA ≤ IOUT ≤ 100 mA

4.90 4.85 5.00 5.00 5.10 5.15 V V Dropout Voltage (VIN–VOUT ) IOUT = 100 mA IOUT = 100 µA – 400 100 600 150 mV mV Load Regulation VIN = 14 V, 100 µA ≤ IOUT ≤ 100 mA – 5 50 mV Line Regulation 6.0 V < V < 26 V, IOUT = 1.0 mA – 5 50 mV Quiescent Current, (IQ ) IOUT = 100 µA, VIN = 12 V IOUT ≤ 50 mA IOUT ≤ 100 mA – 450 750 µA mA mA Ripple Rejection 7.0 V ≤ VIN ≤ 17 V, IOUT = 100 mA, f = 120 Hz 60 75 – dB Current Limit – 105 200 – mA Short Circuit Output Current VOUT = 0 V 25 125 – mA Thermal Shutdown (Note 2) – 150 180 – °C Overvoltage Shutdown VOUT ≤ 1.0 V 28 32 36 V 2. This parameter is guaranteed by design, but not parametrically tested in production. PACKAGE LEAD DESCRIPTION Package Lead Number SO–8 Lead Symbol Function 1 VOUT 5.0 V, ± 2%, 100 mA output. 4, 5 NC No connection. 2, 3, 6, 7 GND Ground. 8 VIN Input voltage.

Figure 10. Single output regulator with key performance parameters labeled. the die temperature below 150°C . R Θ SA = the heatsink–to–ambient thermal resistance. R Θ JC appears in the package section of the data sheet. data sheets of heat sink manufacturers.

http://onsemi.com PACKAGE DIMENSIONS SO–8 DF SUFFIX CASE 751–07 ISSUE W SEATING PLANE N J X 45 K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. A B S DH C 0.10 (0.004) DIM A MIN MAX MIN MAX INCHES 4.80 5.00 0.189 0.197 MILLIMETERS B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.053 0.069 D 0.33 0.51 0.013 0.020 G 1.27 BSC 0.050 BSC H 0.10 0.25 0.004 0.010 J 0.19 0.25 0.007 0.010 K 0.40 1.27 0.016 0.050 M 0 8 0 8 N 0.25 0.50 0.010 0.020 S 5.80 6.20 0.228 0.244 –X– –Y– G MYM0.25 (0.010) –Z– YM0.25 (0.010) Z S X S M

http://onsemi.com Notes

http://onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION JAPAN : ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone : 81–3–5740–2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. CS9201/D NOCAP is a trademark of ON Semiconductor, and is patented. Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone : 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800–282–9855 Toll Free USA/Canada