CS59201 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- 50 MHz Bandwidth
- Operates From Any of Three Standard Supply V oltages: − 8.3 V (IBM Compatible) − 10 V − 12 V
- Available in SO−8 Package OUT+ OUT− IN+ IN− VCC VEE
Figure 1. Block Diagram
ORDERING INFORMATION
CS59201GD8 SO −8 95 Units/Rail CS59201GDR8 SO −8 2500 Tape & Reel
http://onsemi.com MAXIMUM RATINGS* Rating Value Unit Power Supply Voltage (VCC − VEE) 14 V Differential Input Voltage 5.0 V Storage Temperature Range −65 to +150 °C Operating Temperature Range 0 to 70 °C Thermal Resistance, Junction−to−Case, RΘJC 45 °C/W Thermal Resistance, Junction−to−Ambient, RΘJA 165 °C/W ESD Susceptibility (Human Body Model) 1.4 kV *The maximum package power dissipation must be observed. ELECTRICAL CHARACTERISTICS (TA = 25°C, (VCC − VEE) = 7.0 V to 13.2 V; unless otherwise specified.) Characteristic Test Conditions Min Typ Max Unit General Gain (Differential) − 80 100 120 V/V Bandwidth (3.0 dB) VIN = 2.0 mV 30 50 − MHz Input Resistance − 1040 1300 1560 Ω Input Capacitance − − 20 30 pF Input Dynamic Range − 3.0 − − mV Power Supply Current (VCC − VEE) = 12 V − 20 25 mA Output Offset (Differential) RS = 0, RL = 130 Ω − − 200 mV Equivalent Input Noise BW = 4.0 MHz, Note 1 − 0.7 1.0 nV/Hz PSRR, Input Referred RS = 0, f ≤ 5.0 MHz, Note 1 55 60 − dB Gain Sensitivity (Supply) (VCC − VEE) = ±10% − − ±0.5 %/V Gain Sensitivity (Temp.) TA = 25°C to 70°C, RL = 130 Ω − −0.1 − %/°C CMRR, Input Referred f ≤ 5.0 MHz 60 70 − dB Recommended Supply Voltage (VCC − VEE) − 7.45 9.0 10.8 8.3 9.15 13.2 V V V Input Signal, VIN − − 2.0 − mVPP Ambient Temperature, TA − 0 − 70 °C
1 IN+ Positive input to preamplifier. 2 IN− Negative input to preamplifier. 4 VEE Negative supply voltage. 5 OUT+ One of the amplifier outputs. 6 OUT− One of the amplifier outputs. 7 VCC Positive supply voltage. Figure 2. Applications Diagram
- Input must be AC coupled.
- C C’s are AC coupling capacitors.
- R L’s are DC bias and termination resistors,
- R EQ represents equivalent load resistance.
- For gain calculations R P = (RL × REQ)/(RL + REQ).
- Differential gain = 0.72 R P (±18%)(RP in Ω).
- Ceramic capacitors (0.1 μF) are recommended for
good power supply noise filtering.
http://onsemi.com PACKAGE DIMENSIONS SO−8 D SUFFIX CASE 751−07 ISSUE W SEATING PLANE N J X 45/C0095 K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. A B S DH C 0.10 (0.004) DIM A MIN MAX MIN MAX INCHES 4.80 5.00 0.189 0.197 MILLIMETERS B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.053 0.069 D 0.33 0.51 0.013 0.020 G 1.27 BSC 0.050 BSC H 0.10 0.25 0.004 0.010 J 0.19 0.25 0.007 0.010 K 0.40 1.27 0.016 0.050 M 0 8 0 8 N 0.25 0.50 0.010 0.020 S 5.80 6.20 0.228 0.244 −X− −Y− G MYM0.25 (0.010) −Z− YM0.25 (0.010) Z S X S M /C0095/C0095/C0095/C0095 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 CS59201/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative