CS453

CS452 ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Features

2.4A Peak, Typical CS-452 4.4A Peak, Typical CS453 I Low Thermal Resistance To Grounded Tab I 60V Peak Transient Voltage I Low Saturation Voltage I Operates Over a 4.5V to 24V Battery Range Package Options

5 Lead TO-220

Tab (Gnd) CS452/453 2.4A/4.4A Injector Solenoid Driver CS452/453

Description

Typical Application Diagram Absolute Maximum Ratings 1V IN

2 CONTROL

3 Gnd

4 OUT

December, 2001 - Rev. 2 ON Semiconductor

2000 South County Trail, East Greenwich, RI 02818

Tel: (401)885–3600 Fax: (401)885–5786 N. American Technical Support: 800-282-9855 Web Site: www.cherry–semi.com ARCHIVE DEVICE NOT RECOMMENDED FOR NEW DESIGN The CS452/453 is a monolithic inte- grated circuit designed for medium current solenoid driver applica- tions. Its typical function is to sup- ply full battery voltage to fuel injec- tor(s) for rapid current rise, in order to produce positive injector open- ing. When load current reaches a preset level (2.4A for CS452, or 4.4A for CS453), the injector driver reduces the load current by a 4:1 ratio and operates as a constant current source. This condition holds the injector open and reduces system power dissipation. Other solenoid or relay applications can be equally well served by the CS452/453. Two high impedance inputs are provided which permit a variety of control options and can be driven by TTL or CMOS logic. Power Supply Voltage (V Lead Temperature Soldering Wave Solder (through hole styles only)...10 sec. max, 260°C peak CS452/453 VBAT 4.5V to 24V (60V Transient) IOUT Injector 40VZ (max) OUT VCC 300Ω Gnd VIN CONTROL 1kΩ 19kΩ VIN

PACKAGE LEAD # LEAD SYMBOL FUNCTION Electrical Characteristics: VBAT= 12 VDC, TA = 25°C, test circuit of Test Circuit diagram, unless noted CHARACTERISTIC MIN TYP MAX UNIT CS452/453 CONTROL Gnd OUT CS452/453 VCC VIN

40 V/10 W

I 1.2 2.0 mH R L 300 Ω /2W VBAT High Low 0-5.0 VDC

5 Vp-p

Output Peak Current (Ipk) CS452 1.7 2.4 2.9 A CS453 3.6 4.4 5.2 A Output Sustaining Current (Isus) CS452 0.50 0.60 0.70 A CS453 0.95 1.12 1.25 A V(BR)CEO(sus) @ 1mA 42 50 V Output Voltage in Saturated Mode CS452 @ 1.5A 1.2 V CS453 @ 3.0A 1.6 V Internal Regulated Voltage (@V CC, Test Circuit diagram) 6.9 V Input “on” Threshold Voltage 1.4 2.0 V Input “off” Threshold Voltage 0.7 1.3 V Input “on” Current @ V IN = 1.4VDC 35 µA @ VIN = 5.0VDC 220 µA CONTROL “on” Threshold Voltage 1.2 1.5 1.8 V CONTROL Current CONTROL = 0.8VDC -5 -50 µA CONTROL = 5.0VDC 1.0 µA Input Turn On Delay (tl) 0.5 1.0 µs Ipk sense to Isus delay (tp)6 0 µ s CONTROL Signal Delay (tt)1 5 µ s Input Turn Off from Saturated Mode Delay (ts) 1.0 µs Input Turn Off from Sustain Mode Delay (td) 0.2 µs Output Voltage Rise Time (tv) 0.4 µs Output Current Fall Time (tf) 4.0A 0.6 1.0 µs TO-220 1V IN Switches the injector driver on and off. 2 CONTROL Acts to disable OUT when high. 3 Gnd Ground connection. 4 OUT Output Drive current. CC Supply voltage to IC. V CC is connected to V BAT through a series resistor (300Ω typ.)

the drive current to a level which will sustain actuation. Automotive injectors at present time come in two types. to the values above at rated current. Figure 1. Operating Waveforms (Max. Frequency 250Hz, CONTROL

Thermal Data 5 Lead TO-220 RΘ JC typ 2.6 °C/W RΘ JA typ 50 °C/W CS452/453 Package Specification PACKAGE DIMENSIONS IN mm (INCHES) PACKAGE THERMAL DATA Part Number Description CS452GT5 5 Lead TO-220 Straight CS452GTVA5 5 Lead TO-220 Vertical CS452GTHA5 5 Lead TO-220 Horizontal CS453GT5 5 Lead TO-220 Straight CS453GTVA5 5 Lead TO-220 Vertical CS453GTHA5 5 Lead TO-220 Horizontal

Ordering Information

ON Semiconductor and the ON Logo are trademarks of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor reserves the right to make changes without further notice to any products herein. For additional infor- mation and the latest available information, please contact your local ON Semiconductor representative. © Semiconductor Components Industries, LLC, 2000 ARCHIVE DEVICE NOT RECOMMENDED FOR NEW DESIGN

5 Lead TO-220 (Horizontal)

0.81(.032) 1.70 (.067) 6.81(.268) 1.40 (.055) 1.14 (.045) 5.84 (.230) 6.60 (.260) 6.83 (.269) 0.56 (.022) 0.36 (.014) 10.54 (.415) 9.78 (.385) 6.55 (.258) 5.94 (.234) 3.96 (.156) 3.71 (.146) 1.68 (.066) TYP 14.99 (.590) 14.22 (.560) 2.77 (.109) 2.29 (.090) 2.92 (.115) 4.83 (.190) 4.06 (.160) 2.87 (.113) 2.62 (.103)

5 Lead TO-220 (Straight)

2.87 (.113) 2.62 (.103) 6.93(.273) 6.68(.263) 9.78 (.385) 10.54 (.415) 1.02(.040) 0.63(.025) 1.83(.072) 1.57(.062) 0.56 (.022) 0.36 (.014) 2.92 (.115) 2.29 (.090) 1.40 (.055) 4.06 (.160) 6.55 (.258) 5.94 (.234) 14.22 (.560) 0.76 (.030) 3.71 (.146) 3.96 (.156) 14.99 (.590) 14.22 (.560)

5 Lead TO-220 (Vertical)

1.68 7.51 (.296) 1.78 (.070) 4.34 (.171) 0.56 (.022) 0.36 (.014) 1.40 (.055) 1.14 (.045) 4.83 (.190) 4.06 (.160) 14.99 (.590) 14.22 (.560) 2.92 (.115) 2.29 (.090) .94 (.037) .69 (.027) 8.64 (.340) 7.87 (.310) 6.80 (.268) 10.54 (.415) 9.78 (.385) 2.87 (.113) 2.62 (.103) 6.55 (.258) 5.94 (.234) 3.96 (.156) 3.71 (.146)