CS33_08 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Dual Value Chip Resistors, Center Tap CS 33 Vishay Sfernice www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 60067 Chromium silicon thin film is very well suited to produce high density and high ohmic value resistor chips. Performances and sizes are greatly improved compared to Thick Film counterparts. The center tap configuration offers a greater flexibility for hybrid layout design.

FEATURES

  • Center tap feature
  • Small size 30 mil x 30 mil
  • Very high ohmic values (up to 5 MΩ)
  • Good stability 0.1 % (2000 h, rated power, at + 70 °C)
  • Wirebondable TYPICAL PERFORMANCE SCHEMATIC * Please see document “Vishay Green and Halogen-Free Definitions (5-2008)” http://www.vishay.com/doc?99902 Actual Size ABS TRACKING TCR 100 ppm/°C 5 ppm/°C ABS RATIO TOL. 0.5 % 0.5 % RT = R1 + R2 with R1 = R2 Standard R1 R2 RT STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS MATERIAL PASSIVATED CHROMIUM SILICON Resistance range 10 kΩ to 5 MΩ for RT = R1 + R2 TCR: Tracking ± 5 ppm/°C - 55 °C to + 155 °C Absolute ± 100 ppm/°C (± 50 ppm/°C on request) - 55 °C to + 155 °C Ohmic value Ratio 1/1 standard (unequal values: please consult) Tolerance: Absolute ± 0.5 %, ± 1 %, ± 2 % Matching ± 0.5 % standard Power rating 250 mW at + 25 °C, 125 mW at + 70 °C, 50 mW at + 125 °C Stability ± 0.1 % typical, ± 0.2 maximum 2000 h at + 70 °C under Pn Voltage coefficient 0.1 ppm/V Working voltage 100 VDC on RT Operating temperature range - 55 °C to + 155 °C Storage temperature range - 55 °C to + 155 °C Noise < - 20 dB typical MIL-STD-202 Method 308 Thermal EMF < 0.01 µV/°C Shelf life stability 200 ppm 1 year at + 25 °C

Dual Value Chip Resistors, Center Tap Vishay Sfernice Document Number: 60067 For technica l questions, contact: sfer@vishay.com www.vishay.com Revision: 06-Oct-08 25 DIMENSIONS Bonding Pad Area A B C E F D DIMENSION INCHES MILLIMETERS A 0.03 ± 0.004 0.76 ± 0.10 B 0.03 ± 0.004 0.76 ± 0.10 C 0.01 ± 0.015 0.25 ± 0.40 D 0.004 0.10 E 0.006 0.15 F 0.006 0.15 MECHANICAL SPECIFICATIONS Resistive element Chromium Silicon Passivation Silicone Nitride Substrate material Silicon (Consult Vishay for Al 2O3) Bonding pads Aluminum GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CS33-100KF1MD0016 (preferred part number format) GLOBAL MODEL R1 VALUE ABS. TOLERANCE R2 VALUE RAT. TOLERANCE OPTION Decimal R, K or M D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % Decimal R, K or M D = ± 0.5 % leave blank if no option Historical Part Number example: CS 33 100K 1M 1 % 0.5 % R0016 (will continue to be accepted) CS 33 100K 1M 1 % 0.5 % R0016 HISTORICAL MODEL R1/R2 VALUE ABS. TOLERANCE AND RATIO TOLERANCE OPTION -100 K F 1 D 0 6 C S M0 1

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.