CS230 CAMPBELL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
5] SCIENTIFIC \\_/ WHEN MEASUREMENTS MATTER Overview The C5230 temperature profiler uses SDI-12 digital technology for simple integration. SDI-12 does away with analog measurement inaccuracies and susceptibility to electrical noise. The C5230 consists of a rigid probe assembly and up to four optional external temperature probes. The rigid probe assembly maintains the precise position of the temperature points within the profile, while protecting the temperature sensors in all mediums for the long-term. Benefits and Features ) Lifetime min/max temperature recording ) Customizable measurement spacing for any number of
applications
) Available external probes simplify installation for roadbed ) User-resettable min/max temperature recording ) Automatic 1 second temperature update ) Makes use of the included SGB3 to protect against electrical surges Technical Description When power is supplied to the C5230 probe, the internal electronics will continuously measure the temperature at an approximate rate of 1 measurement per second. Every output measurement obtained from the sensor is a running average of 10 consecutive 1-second readings. The accuracy specification is based on an average of 10 consecutive readings. For this purpose, after initial power-up, it is PRODUC W (REE €s230 SDI-12 Temperature Profiler Customizable Rugged, digital temperature measurements The CS230 is suited for a wide variety of applications and environments. The completely sealed probe assembly and external probes permit the C5230 to be used in roadbeds, soils, and water (snow and ice). Applications where the (€S2301is used include spring-load adjustment, frost and permafrost monitoring, and soil and water temperature profiling. ) One SDI-12 channel is used to connect all temperature sensors ) Low power—suitable for remote applications ) No calibration required ) Serial number & installation depth data for each location stored onboard each sensor ) Excellent long-term stability of measurements ) Comprehensive measurement range recommended to delay 10 seconds to obtain the best accuracy. Because the sensor is obtaining a measurement every 1 second, it is recommended to use the Continuous measurement command to obtain the temperature readings. Using the "R” commands will reduce the time taken to obtain a reading with the SDI-12 protocol. g For comprehensive details, visit: www.campbellscl.eu/csZBO
-55°10 +85°C +0.2°C (-40°t0 +85°C) includes lifetime drift +0.5°C(-55° to -40°C) includes lifetime drift includes lifetime drift 00078°C SDI-12 5cm(1.97in) 4 (maximum) Supply Voltage Current Consumption Warm-up Time on Power up Probe Diameter Standard External Probe Length Maximum Length Maximum Cable Length Electronics Sealing Classification 9to28Vdc 1.0 mA (max) quiescent current draw per sensor 20 mA + (# sensors * 1.0 mA) active current draw 10s 2.13cm (0.84in) 45cm(18in) 30m(118in) 152'm (500 ft) 1P68 ol For comprehensive details, visit: www.campbellsci.eu/cs230 CAMPBELL 80 Hathern Road, Shepshed, LE12 9GX UK | +(0)1509 828888 | sales@campbellsci.couk | www.campbellsci.eu SCIENTIFIC AUSTRALIA | BRAZIL | CANADA | CHINA | COSTA RICA | FRANCE | GERMANY | INDIA | SOUTH AFRICA | SPAIN | THAILAND | UK | USA ©2024 Campbell Scientific, Ltd. | 02/21/2024