DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

www.vishay.com Vishay Sfernice Revision: 21-Nov-13 1 Document Number: 60063 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Single Value Wirebondable Thin Film Chip Resistors Chromium silicon thin film is very well suited to produce high density and high ohmic value resistor chips. These high ohmic value chip resistors are available with improved performances and size when compared to thick film counterparts.

FEATURES

  • Small size 20 mil x 20 mil
  • Very high ohmic value up to 10 M
  • Aluminum or gold terminations
  • Good stability 0.1 % (2000 h, rated power at + 70 °C)
  • Wirebondable
  • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 SCHEMATIC AND PATTERN Note (1) Higher on Al2O3 Note
  • Customer can get one or the other part, but positions of pads are similar. Actual Size STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE RESISTANCE RANGE RATED POWER P70 °C W LIMITING ELEMENT VOLTAGE V TOLERANCE ± % TEMPERATURE COEFFICIENT ± ppm/°C CS22 0202 10K to 10M 0.05 100 (1) 0.5, 1, 2 50, 100 R CLIMATIC SPECIFICATIONS Operating temperature range - 55 °C to + 155 °C Storage temperature range - 55 °C to + 155 °C MECHANICAL SPECIFICATIONS Resistive element Chromium silicon Passivation Silicon nitride Substrate material Silicon (consult Vishay for Al 2O3) Bonding pads Aluminum or gold DIMENSIONS in millimeters (inches) 0.58 ± 0.05 (23 ± 2) 0.43 (17.2) 0.58 ± 0.05 (23 ± 2) 0.43 (17.2) 0.08 min. (3.2 min.) 0.08 min. (3.2 min.) 0.58 ± 0.05 (23 ± 2) 0.47 (18.8) 0.58 ± 0.05 (23 ± 2) 0.47 (18.8) 0.10 min. (4 min.) 0.125 min. (5 min.) Type A (Current) Type B (New)

www.vishay.com Vishay Sfernice Revision: 21-Nov-13 2 Document Number: 60063 For technical questions, contact: sferthinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DERATING DIMENSIONS in millimeters (inches) TECHNICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Stability ± 0.1 % typical, ± 0.2 maximum 2000 h at + 70 °C at Pn Noise < - 20 dB typical MIL-STD-202 method 308 Thermal EMF < 0.01 μV/°C Shelf life stability 20 0 ppm 1 year at + 25 °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CS22-100KD0016 (preferred part number format) GLOBAL MODEL VALUE TOLERANCE TERMINATIONS OPTION Decimal R, K or M D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % Blank = Aluminum G = Gold Leave blank if no option Historical Part Number example: CS22 150K 0.5 % R0016 (will continue to be accepted) CS22 150K 0.5 % R0016 HISTORICAL MODEL VALUE TOLERANCE OPTION 0.4 max. (15.75 max.) 0 2 55 07 5 1 0 0 1 2 5 1 5 0 1 7 50 100 Ambient Temperature in °C Rated Power in % -100K D 0 62C 2S 01

www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.