CS14891 LEDIL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 47
Technical content
Product Number CS14891_HB-IP-2X6-M Family HighBay Type Assembly Color clear Diameter 173 + 71,4 mm Height 11,39 mm Style rectang Optic Material PMMA Holder Material Fastening pin, screw Status production ready ROHS Compliant Yes Date Updated 24/05/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XM-L 27 deg Medium 94 % 3.100 - XP-G3 32 deg Medium 94 % 2.400 - XP-L 39 deg Medium 94 % 1.700 - XP-L2 39 deg Medium 94 % 1.700 - XT-E 25 deg Medium 92 % 3.100 - XP-E sim: 28 Medium sim: 94 %sim: 2.810 - H35C1 (LEMWA33) sim: 35 Medium sim: 94 %sim: 2.100 - LUXEON XR-TX (L2T0-xxyy012M) 28 deg Medium 94 % 2.950 - LUXEON T 29 deg Medium 94 % 2.700 - LUXEON 5050 sim: 37 Medium sim: 93 %sim: 1.980 - LUXEON V 35 deg Medium 93 % 2.100 - NVSxE21A 24 deg Medium 92 % 4.100 - NVSxx19B/NVSxx19C 31 deg Medium 93 % 2.500 - Oslon Square PC 29 deg Medium 93 % 2.690 - OSCONIQ P 3737 (3W version) sim: 26 Medium sim: 94 %sim: 3.680 - Oslon Square Gen3 sim: 27 Medium sim: 94 %sim: 2.990 - Fortimo FastFlex LED board 2x6 DPX G432 deg Medium 94 % 2.400 - Fortimo FastFlex LED board 2x6 DP G4 sim: 26 Medium sim: 94 %sim: 3.950 - Z5M1/Z5M2 30 deg Medium 93 % 2.630 - Z8Y22P 30 deg Medium 93 % 2.500 - SMJQ-D36W12Mx 26 deg Medium 91 % 2.800 - SMJQ-D36W12Px 29 deg Medium 94 % 2.700 - Z8Y22 26 deg Medium 91 % 2.800 - January 25th 2018 8:11 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10
24240 SALO, Finland
http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001
D E C F B G A H Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L SCALE 1:1 WEIGHT - SHEET 1/1 SIZE DRAWING TITLE MechDrawing_HB-IP-2X6 PART NUMBER Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. INDEX PART NO DESCRIPTION MATERIAL COLOUR
1 C14018 2X6-SEAL25 Silicone
54.2 54.2 54.2 44.9( ) PCB typically 45mm 50.8 25.4 25.4 146.5( ) PCB typically 146,6mm LED position Wiring: PCB is fully sealed between the lens with silicone seal and the heatsink. Wiring needs to be done through the PCB and heatsink to maintain high IP rating. 1.7 B A 173 71.4 3.4 Fasten middle screws first. Recommended torque with pan head screw: 0.57Nm (for 1.6mm thick PCB, no thermal pad) D D E E 11.395.35 3.2 3.2 Detail B Scale 2:1 3.2 Detail A Scale 2:1 3.4 M3 screw size 5.35 Section view D-D Scale 2:1 1.6 (1.6mm pcb) 9.64 1.65 (silicone) 2.65 (rib) Section view C-C Scale 1:1 Ribs Silicone seal is tested to work in LEDiL test assemblies. Customer is recommended to test the sealing in the end product due many variables, such as heat sink surface and possible chemical traces
NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.