CRT-2400 SOVICO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

The Radio Transceiver (RT) houses a radio (2.4GHz) with corresponding antennas and serves as an access point, enabling RF communications with CrewCom Radio Packs. Using CrewNet as a backbone, up to 46 RTs (up to 32 with 2.4GHz and 14 with 900MHz) can be positioned throughout a wide coverage area by being connected to a Control Unit either directly or through a hub(s), or connected in a daisy-chain configuration. Key Features

  • Supports up to 6 Normal mode or 32 High Density mode Radio Packs
  • Supports a selectable Normal or High Density mode of operation
  • CrewNet connections (etherCon or duplex LC Single Mode Fiber) with network status indicators
  • Status indicators for data RX/TX, operation mode, and error
  • CrewNet RT Loop connection for connecting up to 8 CrewCom Radio Transceivers
  • Micro USB connection for firmware updates
  • Integrated Ping function, which uses all LEDs to physically identify a target device
  • Dual powering options (network power, external 48VDC—sold separately) ** Notice About Specifications: While Pliant makes every attempt to maintain the accuracy of the information contained in this document, this information is subject to change without notice. Please check our website for the latest system specifications and certifications. Copyright ©2016 Pliant Technologies, LLC. All rights reserved. The Pliant™ and CrewCom® word marks and the Pliant “P” logo are trademarks of Pliant Technologies, LLC. The SmartBoom® word mark is a trademark of CoachComm LLC. All other trademarks are property of their respective owners. CRT-2400 / CRT-2400CE* 2.4GHz Radio Transceiver (Front View) CRT-2400 / CRT-2400CE* 2.4GHz Radio Transceiver (Bottom View) Specification** CRT-2400 RF Frequency (MHz) 2400–2483 MHz RF Scheme FHSS with TDMA Effective Radiated Power 100 mW (+20dBm) Receiver Sensitivity -100dBm Radio Certification FCCID: HSW-CCT24 and IC: 4492A-CCT24 Transmission Range 500 ft. (150 m) under typical conditions; 1500 ft. (450 m) line of sight (Note: Functional range depends on many variables, including RF signal absorption, reflection, and external interference.) No. of Radio Packs Supported (when RT in Normal Mode) 6 No. of Radio Packs Supported (when RT in High Density Mode) 32 Number of Antenna Connections per RT 2 Antenna Connector Type RP-TNC Supplied Antenna +2dBi Omni-directional (whip) CrewNet In Port (supports 1 connection) (1) RJ-45 for copper; (1) duplex LC for Single Mode Fiber RT Loop Port (1) RJ-45 Maximum Line Length Copper 330 ft. (100 m); Fiber 32,800 ft. (10,000 m) Network Power CrewNet RJ-45 only External Power 48VDC Power Supply (Sold Separately) Weight 1.25 lbs (567 g) Operating Environment -20° to 50° C (-4° to 122° F); 10% to 90% Humidity Maximum Altitude 9,842 ft. (3,000 m) RoHS Yes What’s in the Box?
  • Radio Transceiver
  • USB A to Micro B cable
  • Cat 5e cable, 15 ft. (4.6 m)
  • Product Overview Guide
  • Mounting Hardware/Bracket
  • Omni-Directional Antenna (x2)
  • Warranty Extension Registration Card Optional Accessories
  • TMA-ANTSYS-09C 2.4GHz 9dBi Directional Corner Reflector Antenna Kit
  • 00003359 48VDC External Power Supply Pliant Technologies, LLC CrewCom®

205 Technology Parkway

Auburn, Alabama 36830 USA www.plianttechnologies.com Phone +1.334.321.1160 Fax +1.334.321.1162 CRT-2400 Data Sheet 5.16 *The CRT-2400CE model meets the same specifications and complies with ETSI standards (300.328 v1.8.1). Non-CE models are non-compliant with ETSI standards. 2.4GHz Radio Transceiver Product Specifications CRT-2400 / CRT-2400CE* The following device models have not been authorized as required by the rules of the Federal Communications Commission. These devices are not, and may not be, offered for sale or lease until authorization is obtained. Model: CRT-2400