CRO8000Z ZCOMM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
LOW COST - HIGH PERFORMANCE -150 -140 -130 -120 -110 -100 -90 -80 -70 -60
1 E+3 10 E+3 100 E+3
0.5±3.5 7890 0.5-4.5 -99 -40 <0.5 -40 to 85 Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW, typ.) Harmonic Suppression (2nd, typ.) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance (max.) Pushing Pulling ( dB Return Loss, Any Phase) Operating Temperature Range Package Style PLL-24H MHz dBc/Hz dBc Vdc MHz/V dBm pF MHz/V MHz Vdc mA Supply Voltage (Vcc, nom.) Supply Current (Icc, typ.) All specifications are typical unless otherwise noted and subject to change without notice. PHASE NOISE (1 Hz BW, typical) © Z-Communications, Inc. All rights reservedPage 1 VOLTAGE CONTROLLED OSCILLATOR
FEATURES
APPLICATIONS
PERFORMANCE SPECIFICATIONS VALUE UNITS POWER SUPPLY REQUIREMENTS APPLICATION NOTES 7890 8010- MHz• Frequency Range:
- Tuning Voltage: 0.5-4.5 Vdc - Style PackagePLL-24H A1Rev
- AN-100/1 : Mounting and Grounding of VCOs
- AN-102 : Proper Output Loading of VCOs
- AN-107 : How to Solder Z-COMM VCOs NOTES:
9939 Via Pasar • San Diego, CA 92126
TEL (858) 621-2700 FAX (858) 621-2722 -8010 OFFSET (Hz) £(f) (dBc/Hz)
7858 7878 7898 7920 7946 7976 8012 8051 8085 8115 VOLTAGE CONTROLLED OSCILLATOR © Z-Communications, Inc. Page 2 Printed in the U.S.A. CRO8000Z TUNING CURVE, typ. POWER CURVE, typ. PAGE 2 PHYSICAL DIMENSIONS -40 8 10 12 24 22 20 91 1 2123 TOP P1 RF OUTPUT P2-4 GROUND P5 REFERENCE OSCILLATOR INPUT P6 GROUND P7 CLOCK P8 DATA P9 GROUND P10 LOAD ENABLE P11 GROUND P12 LOCK DETECT P13 VCC P14 GROUND P15 GROUND P16 GROUND P17 NO CONNECTION P18-24 GROUND TABS RANGE: SEE NOTE 5 (4 PLACES) DETAIL A .015 .030 .055 DETAIL B (TYP) (8 PLACES) 1. The inside radius of all 24 half holes at the perimeter of the board are plated to provide a surface for the attachment of the PLL Module to the PCB. 16 pads are for grounding, 8 pads are for signal interface. 2. The surface of the shield is tin-plated and may be soldered to. The shield’s base metal is cold-rolled steel. 3. The ground plane on the bottom side is ground and attaches to a ground track on the top side of the board as well as to the shield. 4. Unless otherwise noted all dimensions are in inches. 5. Unless otherwise noted all tolerances are as follows: .xxx = ± .010. SEE DETAIL A SEE DETAIL B PIN 1 BOTTOM .000 .153 .238 .323 .408 .493 .578 .663 -.025 .841 .000 .115 .200 .285 .370 .455 .580 -.026 .605 .816 0.220 .032 SIDE VIEW TUNING VOLTAGE (Vdc) FREQUENCY (MHz) POWER OUTPUT (dBm) FREQUENCY (MHz) -40