CRH05-107P1M AAC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
American Accurate Components, Inc. CRH – Thick Film Chip Resistors High Resistance The content of this specification may change without notification 09/15/08
188 Technology Drive, Unit H, Irvine, CA 92618
TEL: 949-453-9888 FAX: 949-453-8889 HOW TO ORDER CRH 10- 107 K 1 M Packaging M = 7” Reel B = Bulk Case Termination Material Sn = Leave Blank SnPb = 1 AgPd = 2 Au = 3 (avail in CRH-A series only) Tolerance (%) P = +50 N = +30 M = +20 K = +10 J = +5 G = +2 F = +1 EIA Resistance Code Three digits for > 5% tolerance Four digits for 1% tolerance Size 05 = 0402 16 = 0603 10 = 0805 18 = 1206 14 = 1210 12 = 2010 01 = 2512 Series High ohm chip resistors SCHEMATIC CRH CRH-A, CRH-B DIMENSIONS (mm) Series Size L W t a b Package Qty -0.10 10,000 -0.10 10,000 CRH16B 0603 5,000 CRH10B 0805 5,000 CRH18B 1206 3.20 +0.05 -0.20 1.60 +0.05 -0.15 5,000 CRH01A 2512 4,000 Termination Material: Sn or SnPb or AgPd or Au Ceramic Substrate Resistive Element Overcoat Conductor
FEATURES
Stringent specs in terms of reliability, stability, and quality. Available in sizes as small as 0502 Resistance Range up to 150 Gig ohms E-24 and E-96 Series Low Voltage Coefficient of Resistance Wrap Around Terminal for Solder Flow RoHS/Lead Free in Sn, AgPd, and Au Termination Materials
American Accurate Components, Inc. CRH – Thick Film Chip Resistors High Resistance The content of this specification may change without notification 09/15/08 TEL: 949-453-9888 FAX: 949-453-8889
ELECTRICAL CHARACTERISTICS
Voltage (Max.)* Resistance Range by Tolerance& TCR (ppm/°C) ±1% ±5% ±10% ±20% Series Size Rated Power Working Overload Operating Temperature +400 ~ -100 ppm ±500 ppm ±500 ppm ±500 ppm CRH05 0402 1/20 w 25 V 50 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 100M 10M ~ 100M CRH16 0603 1/16w 50 V 100 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 10M ~ 1.0G CRH10 0805 1/10w 150 V 300 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 10M ~ 1.0G CRH18 1206 1/8w 200 V 400 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 10M ~ 1.0G CRH14 1210 1/4w 200 V 400 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 10M ~ 1.0G CRH12 2010 1/2w 200 V 400 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 10M ~ 1.0G CRH01 2512 1w 200 V 400 V -55 ~ +155°C 10M ~ 100M 10M ~ 100M 10M ~ 470M 10M ~ 1.0G Voltage (Max.)* Resistance Range by Tolerance & TCR (ppm/°C) ±1%, ±2% ±5% ±10% ±20 ±30 ±50% Series Size Rated Power Working Overload Operating Temperature ±100 ppm ±1500 ppm ±1500 ppm ±1500 ppm CRH16A 0603 1/32w 50V 100V -55 ~ 125°C 1.0M ~ 50M 1.0M ~ 50M 1.0M ~ 150G 1.0M ~ 150G CRH10A 0805 1/16w 75 V 150 V -55 ~ +125°C 1.0M ~ 50M 1.0M ~ 50M 1.0M ~ 150G 1.0M ~ 150G CRH18A 1206 1/8w 150 V 300 V -55 ~ +125°C 1.0M ~ 50M 1.0M ~ 50M 1.0M ~ 150G 1.0M ~ 150G CRH01A 2512 1w 300 V 500 V -55 ~ +125°C 1.0M ~ 50M 1.0M ~ 150G 1.0M ~ 150G Voltage (Max.)* Resistance Range by Tolerance & TCR (ppm/°C) ±5%, ±10%, ±20% Series Size Rated Power Working Overload Operating Temperature ±500 ppm ±1500 ppm CRH05B 0402 1/16w 50 V 100 V -55 ~ +125°C 10M ~ 100M CRH16B 0603 1/16w 50 V 100 V -55 ~ +125°C 43M ~ 1.0G CRH10B 0805 1/10w 150 V 300 V -55 ~ +125°C 43M ~ 1.0G 1.2G ~ 10G CRH18B 1206 1/8w 200 V 400 V -55 ~ +125°C 43M ~ 1.0G 1.2G ~ 10G * Rated Voltage = DERATING CURVE If the ambient temperature exceeds 70°C, then the rated power must be derated according to the power derating curve shown to the right. PERFORMANCE Test Results Test Item Test Conditions ±100ppm parts > ±100ppm parts Long Term Stability Normal temperature and humidity for 1,000 hours ±0.5% ±0.5% High Temperature Loading DC15V, 1.5 hours on, 0.5 hours off, 1,000 hours at 70°C ±0.5% ±1.0% Resistance to Soldering Heat 260°C + 5°C for 10+1-0 seconds ±0.5% ±1.0% Short Time Overload Test for 5 seconds using maximum Overload Voltage ±0.5% ±1.0% Operating Temperature Range Refer to electrical charachteristics