CRGCQ TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 9
Technical content
SMD AEC-Q200 Compliant Thick Film Chip Resistor 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Key Features Small size and light weight Suitable for both wave and reflow soldering techniques Supplied on tape AEC-Q200 Compliant 7 different package sizes Terminal finish matte Sn over Ni Type CRGCQ Series TE Connectivity is pleased to introduce our AEC-Q200 compliant thick film Chip resistor, suitable for auto placement in volume and for most applications. Available in seven different packages and supplied on tape and reel for automatic insertion processes. Standard values – E24 Series Characteristics – Electrical Type CRGCQ0402 CRGCQ0603 CRGCQ0805 CRGCQ1206 Power Rating @ 70°C 0.0625W 0.1W 0.125W 0.25W Jumper Rated current 1A 1A 2A 2A Max. Jumper Current 2A 2A 5A 10A Max. Working Voltage 50V 75V 150V 200V Max. Overload Voltage 100V 150V 300V 400V Dielectric Withstand V. 100V 300V 500V 500V Jumper resistance <50mΩ Temperature Range -55°C ~ +155°C Ambient Temperature 70°C Type CRGCQ1210 CRGCQ2010 CRGCQ2512 Power Rating @ 70°C 0.5W 0.75W 1W Jumper Rated current 2A 2A 2A Max. Jumper Current 10A 10A 10A Max. Working Voltage 200V 200V 200V Max. Overload Voltage 500V 500V 500V Dielectric Withstand V. 500V 500V 500V Jumper resistance <50mΩ Temperature Range -55°C ~ +155°C Ambient Temperature 70°C
SMD AEC-Q200 Compliant Thick Film Chip Resistor 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Power derating curve Power rating based on continuous load operation in ambient temperature of 70°C. For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve. Dimensions: Type Dimension (mm) L W H A B CRGCQ0805 2.00±0.15 1.25+0.15 -0.10 CRGCQ1206 3.10±0.15 1.55+0.15 -0.10
SMD AEC-Q200 Compliant Thick Film Chip Resistor 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Construction: Power Rating and Resistance Range: Type Power Rating @ 70°C Tolerance Resistance Range Standard Series CRGCQ0402 0.0625W Jumper < 5ϬŵΩ ±1% 10R – 1M E24 E96 by negotiation ±5% 1R0 – 10M CRGCQ0603 0.1W Jumper < 5ϬŵΩ ±1% 10R – 1M E24 E96 by negotiation ±5% 1R0 – 10M CRGCQ0805 0.125W Jumper < 5ϬŵΩ ±1% 10R – 1M E24 E96 by negotiation ±5% 1R0 – 10M CRGCQ1206 0.25W Jumper < 5ϬŵΩ ±1% 10R – 1M E24 E96 by negotiation ±5% 1R0 – 10M CRGCQ1210 0.5W Jumper < 5ϬŵΩ ±1% 10R – 1M E24 E96 by negotiation ±5% 1R0 – 10M CRGCQ2010 0.75W Jumper < 5ϬŵΩ ±1% 10R – 1M E24 E96 by negotiation ±5% 1R0 – 10M CRGCQ2512 1W Jumper < 5ϬŵΩ ±1% 10R – 1M E24 E96 by negotiation ±5% 1R0 – 10M
SMD AEC-Q200 Compliant Thick Film Chip Resistor 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Marking: E24 series 0603 – 2512 3 Digits – first two digits denote significant figures of resistance and third digit denotes number of zeros thereafter. EG 222 = 2K2 Marking for E96 Series 0805 – 2512 4 digits – First three digits denote significant figures of resistance and fourth digit denotes number of zeros thereafter. EG. 1000 = 100R For ohŵiĐ ǀalues ďeloǁ ϭϬϬR letter ͞R͟ deŶotes deĐiŵal poiŶt. EG 1R80 = ϭR8 / ϭ.8Ω 0402 size chips are not marked 0603 E96 3 digit marking.
SMD AEC-Q200 Compliant Thick Film Chip Resistor 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Marking for E96 series 0603 size with no marking code marked as per E24 values. Performance Specification Characteristics Limits Test Methods Load life ±ϭ%: ±;ϭ.Ϭ%+Ϭ.ϭΩͿMax. ±5%: ±;ϯ.Ϭ%+Ϭ.ϭΩͿMax. 125°C, 35% power, at RCWV or Max. Working Voltage whichever less,1,000 hours ;ϭ.5 hours ͞ON͟, Ϭ.5hours͞OFF͟Ϳ, Measurement at 24±2 hours after test conclusion. (MIL-STD-202 Method 108) Temperature coefficient ϭΩ≤ R ≤ϭϬΩ: ±400PPM/°C ϭϬΩ<R≤ϭϬϬΩ: ±200PPM/°C R>ϭϬϬΩ: ±100PPM/°C Measure between -55°C ~+125°C Short-time overload ±ϭ%: ±;ϭ.Ϭ%+Ϭ.ϭΩͿ Max ±5%: ±;Ϯ.Ϭ%+Ϭ.ϭΩͿ Max 2.5x Rated voltage or Max. Overload Voltage whichever is lower for 5 seconds, then check the resistance. Terminal Bending ±;ϭ.Ϭ%+Ϭ.Ϭ5ΩͿ Max Bending Distance 3mm, Duration: 60s±5s, then check the resistance Solderability 95% coverage Min. 245±3°C; 2~3s Soldering heat ±;ϭ.Ϭ%+Ϭ.Ϭ5ΩͿ Max 260±5°C; 10±1s Moisture Resistance ϭ%: ± ;Ϭ.5%+Ϭ.ϭΩͿ Max. 5%: ± ;ϯ.Ϭ%+Ϭ.ϭΩͿ Max. 80~100%RH, 2.5Hr, 10 cycles, Measurement at 24 hours after test conclusion (MIL-STD-202 Method 106) Biased Humidity ϭ%: ± ;ϭ.Ϭ%+Ϭ.ϭΩͿ Max. 5%: ± ;ϯ.Ϭ%+Ϭ.ϭΩͿ Max. 10% rated power, 85℃/85%RH, 1000Hr. Measurement at 24 hours after test conclusion. (MIL-STD-202 Method 103) Dielectric Withstand Voltage No evidence of flashover, mechanical damage, arcing or insulation breakdown Resistor shall be clamped in the trough of 90° metallic V-block and shall be tested at AC potential respectively specified in the given list of each product type for 60~70s. Temperature cycling ϭ%: ± ;Ϭ.5%+Ϭ.ϭΩͿ Max. 5%: ± ;ϭ.Ϭ%+Ϭ.ϭΩͿ Max -55±3°C 30min ~normal temperature 10min-15min~155±2°C 30min~normal temperature 10min-15min1000 cycles. Measurement at 24 hours after test conclusion. (JESD22 Method JA-104) ESD ±;ϭ.Ϭ%+Ϭ.Ϭ5ΩͿ Max With the electrometer in direct contact with the discharge tip, verify the voltage setting at levels of ±500V, ±1KV, ±2KV, ±4KV, ±8KV, The electrometer reading shall be within ±10% for voltages from 500V to Sulfuration test ϭ%: ± ;ϭ.Ϭ%+Ϭ.ϭΩͿ Max. 5%: ± ;5.Ϭ%+Ϭ.ϭΩͿ Max. H2S 3~5PPM 50°C±2°C 91%~93% RH 1000H
SMD AEC-Q200 Compliant Thick Film Chip Resistor 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Packaging Specification Paper taping Type A ± 0.2 B ± 0.2 C ± 0.05 ØD +0.1 E ± 0.1 F ± 0.05 G ± 0.1 W ± 0.2 T ± 0.1 Embossed Taping Type A ±0.2 B ±0.2 C ±0.05 ØD +0.1 ØD1 +0.1 E ±0.1 F ±0.05 G ±0.1 W ±0.2 T ± 0.1 Peeling strength of cover tape: Test condition: 0.1 to 0.7 N at a peel off speed of 300mm / min.
SMD AEC-Q200 Compliant Thick Film Chip Resistor 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Reel Dimensions (mm): Type Tape Reel Qty A ± 0.5 B ± 0.5 C ± 0.5 D ± 1 M ± 2 W ± 1
0402 Paper 10,000 2 13 21 60 178 10
0603 Paper 5,000 2 13 21 60 178 10
0805 Paper 5,000 2 13 21 60 178 10
1206 Paper 5,000 2 13 21 60 178 10
1210 Paper 5,000 2 13 21 60 178 10
2010 Paper 4,000 2 13 21 60 178 13.8 2512 Embossed 4,000 2 13 21 60 178 13.8 Label: A. TE Product Number B. Product Description C. Quantity D. Lot Number E. RoHS Statement Example:
SMD AEC-Q200 Compliant Thick Film Chip Resistor 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Environment Related Substance This product complies to EU RoHS directive, EU PAHs directive, EU PFOS directive and Halogen free. Ozone layer depleting substances. Ozone depleting substances are not used in our manufacturing process of this product. This product is not manufactured using Chloro fluorocarbons (CFCs), Hydrochlorofluorocarbons (HCFCs), Hydrobromofluorocarbons (HBFCs) or other ozone depleting substances in any phase of the manufacturing process. Storage Condition The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your company, provided that they remain packed as they were when delivered and stored at a temperature of 25°C ± 10°C and a relative humidity of 60%RH ± 10%RH, chemical and dust free atmosphere Even within the above guarantee periods, do not store these products in the following conditions otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 2. In direct sunlight Solder Profile Wave soldering condition: (2 cycles Max.) Pre-heat : 100 ~ 120 ℃, 30 ± 5 sec. Peak temp.: 260 ℃
SMD AEC-Q200 Compliant Thick Film Chip Resistor 1773204-3 CIS WR 03/2018 Dimensions in millimetres unless otherwise specified Dimensions Shown for reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Reflow soldering condition: (2 cycles Max.) Pre-heat : 150 ~ 180 ℃, 90 ~ 120 sec. Suggestion solder temp.: 235 ~ 255 ℃, 20 ~ 40 sec. Peak temp.: 260 ℃ Hand Soldering condition: The Soldering iron tip should be less than 300°C and maximum contact time should be 5 seconds How To Order CRGCQ 0603 J 10K Common Part Size Tolerance Resistance Value CRGCQ – AEC- Q200 compliant Thick Film Chip Resistor 0402 0603 0805 1206 1210 2010 2512 F - ±1% J - ±5% ϭ ohŵ ;ϭΩͿ ϭRϬ ϭK ohŵ ;ϭϬϬϬΩͿ ϭKϬ ϭϬϬK ohŵ ;ϭϬϬϬϬϬΩͿ 100K ϭM ohŵ ;ϭϬϬϬϬϬϬΩͿ ϭMϬ