CRG1206F220R | DigiCamel IC Datasheet

Online Datasheet

Read CRG1206F220R online.

CRG1206F220R TEC | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 8

Technical content

1773204 Rev J 12/2018 Dimensions in

reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Key Features Thick Film Resistors with high power to size ratio, ideally suited to industrial and general purpose use Value range from ϭΩ to ϭϬMΩ Eight package sizes Terminal finish matte Sn over Ni Type CRG Series The resistive element is screen printed and fired, and a passivation layer added. Each resistor is trimmed to tolerance by laser. The pre-scribed tile is then broken into strips, the end plating fired on, and the strips broken into individual components. Final termination finish is electroplated matte Sn over a Ni barrier layer.

Electrical Characteristics

Type 0201 0402 0603 0805 1206 1210 2010 2512 Resistance raŶge ;ΩͿ Min 1R0 1R0 1R0 1R0 1R0 1R0 1R0 1R0 Max 10M 10M 10M 10M 10M 10M 10M 10M Tolerance (%) 1 1 1 1 1 1 1 1 Code Letter F F F F F F F F Max Working Voltage 25V 50V 75V 150V 200V 200V 200V 200V Max Overload Voltage 50V 100V 150V 300V 400V 500V 500V 500V Dielectric Strength (V) - 100V 300V 500V 500V 500V 500V 500V Rated current (Jumper) (A) 0.5A 1A 1A 2A 2A 2A 2A 2A Max Overload Current (A) (Jumper) 1A 2A 2A 5A 10A 10A 10A 10A Temperature Range -55°C ~ 155°C Power rating: Resistors shall have a power rating based on continuous load operation at an am bient temperature of 70 ℃ . For temperature in excess of 70 ℃ , The load shall be derate as shown below

reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Derating Chart Constuction Dimensions: Type Dimensions (mm) L W H l 1 l 2 0603 1.60±0.10 0.80+0.15 -0.10 0805 2.00±0.15 1.25+0.15 -0.10 1206 3.10±0.15 1.55+0.15 -0.10

reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Performance Specification: Characteristic Specification Test Methods (JIS C 5201-1) *Insulation Resistance ϭ,ϬϬϬMΩ MiŶ. Apply 500V DC between protective coating and termination for 1 min, then measure (Sub-clause 4.6) *Dielectric Withstanding Voltage No evidence of flashover mechanical damage, arcing or insulation break down Apply 100V(0402) 300V(0603) & 500V (0805,1206,1210,2010,2512) AC between protective coating and termination for 1 minute (Sub-clause 4.7) Temperature Coefficient of Resistance (TCR) ϭΩ-ϭϬΩ : ± ϰϬϬ PPM/℃ ϭϬ.ϭΩ-ϭϬϬΩ : ± ϮϬϬ PPM/℃ ϭϬϭΩ~ϭϬMΩ : ± ϭϬϬ PPM/℃ For ϬϮϬϭ: >ϭϬϬΩ : ± ϮϬϬ PPM/℃ Natural resistance change per temp. degree centigrade. R1: Resistance value at room temperature (t1) R2: Resistance value at room temp. plus 100 ℃ (t2) (Sub-clause 4.8) Short Term Overload Resistance change rate is: ± ϱ% ;Ϯ.Ϭ% + Ϭ.ϭΩͿ Maǆ. ± ϭ% ;ϭ.Ϭ% + Ϭ.ϭΩͿ Maǆ. Permanent resistance change after the application of a potential of 2.5 times RCWV for 5 seconds (Sub-clause 4.13) *Solderability 95 % coverage Min. Test temperature of solder : 245 ±3°C Dipping time solder : 2-3 seconds (Sub-clause 4.17) Soldering Temp. Reference shall be satisfied without distinct deformation in appearance. (95 % coverage Min.) Wave soldering condition: (2 cycles Max.) Pre-heat : 100 ~ 120 ℃, 30 ± 5 sec. Suggestion solder temp.: 235 ~ 255 ℃, 10 sec. (Max.) Peak temp.: 260 ℃ Reflow soldering condition: (2 cycles Max.) Pre-heat : 150 ~ 180 ℃, 90 ~ 120 sec. Suggestion solder temp.: 235 ~ 255 ℃, 20 ~ 40 sec. Peak temp.: 260 ℃ Hand soldering condition: The soldering iron tip temperature should be less than 300℃and maximum contract time should be 5 sec. Soldering Heat Resistance change rate is: ±;ϭ%+Ϭ.ϬϱΩͿ Maǆ. Dip the resistor into a solder bath having a temperature of 260°C±3°C and hold it for 10±1 seconds. (Sub-clause 4.18)

reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Performance Specification: (Continued) Characteristic Specification Test Methods (JIS C 5201-1) Temperature Cycling Resistance change rate is ± ϱ% ;ϭ.Ϭ% + Ϭ.ϬϱΩͿ Max. ± ϭ% ;Ϭ.ϱ% + Ϭ.ϬϱΩͿ Maǆ. Resistance change after continuous 5 cycles for duty cycle specified below : Step Temperature Time 1 -55°C±3°C 30 mins

2 Room Temp 10~15 mins

3 155°C±2°C 30 mins

4 Room Temp 10~15 mins

(Sub-clause 4.19) Load Life in Humidity Resistance change rate is ± ϱ% ;ϯ.Ϭ% + Ϭ.ϭΩͿ Maǆ. ± ϭ% ;ϭ.Ϭ% + Ϭ.ϭΩͿ Maǆ. Resistance change after 1,000 hours (1.5 hours "on", 0.5 hour "off" ) at RCWV in a humidity chamber controlled at 40℃ ± 2℃ and 90 to 95 % relative humidity (Sub-clause 4.24.2.1) Load Life Resistance change rate is ± ϱ% ;ϯ.Ϭ% + Ϭ.ϭΩͿ Maǆ. ± ϭ% ;ϭ.Ϭ% + Ϭ.ϭΩͿ Maǆ. Permanent resistance change after 1,000 hours operating at RCWV, with duty cycle of (1.5 hours"on", 0.5 hour"off") at 70℃ ± 2℃ ambient (Sub-clause 4.25.1) Terminal Bending Resistance change rate is ± ;ϭ.Ϭ% + Ϭ.ϬϱΩͿ Maǆ. Twist of Test Board : Y/X = 5/90 mm for 10 seconds (Sub-clause 4.33) The resistors of ϬΩ oŶlǇ ĐaŶ do the ĐharaĐteristiĐ Ŷoted of * Environment Related Substance This product complies to EU RoHS directive, EU PAHs directive, EU PFOS directive an d Halogen free. Ozone layer depleting substances are not used in our manufacturing process of this product. This product is not manufactured using Chloro fluorocarbons (CFCs), Hydrochlorofluorocarbons (HCFCs), Hydrobromofluorocarbons (HBFCs) or other ozone depleting substances in any phase of the manufacturing process. Storage Condition The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your company, provided that they remain packed a s they were when delivered and stored at a temperature of 25°C ± 10°C and a rel ative humidity of 60%RH ± 10%RH, chemical and dust free atmosphere Even within the above guarantee periods, do not store these products in the following conditions otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 2. In direct sunlight

reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Marking E24 series 0603 – 2512 3 Digits – first two digits denote significant figures of resistance and third digit denotes number of zeros thereafter. EG 222 = 2K2 Marking for E96 Series 0805 – 2512 4 digits – First three digits denote significant figures of resistance and fourth digit denotes number of zeros thereafter. EG. 1000 = 100R For ohmic ǀalues ďeloǁ ϭϬϬR letter ͞R͟ deŶotes deĐiŵal poiŶt. EG 1R80 = ϭR8 / ϭ.8Ω 0201 and 0402 size chips are not marked 0603 E96 3 digit marking. Resistance Code from table on next page, and Multiplier code from table below Multiplier Code Code A B C D E F G H X Y Z Mult. 10⁰ 10¹ 10² 10³ 10Ϻ 10ϻ 10ϼ 10Ͻ 10⁻¹ 10⁻² 10⁻³ Coding Formula Example 10K2 = 102 X 10² = 02C ↓ ↓ XX X 02 C Res. Code Multiplier Code 33R2 = 332 X ϭϬ⁻¹ = 51X ↓ ↓ 51 X

reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Resistance Code Label Label shall be marked with the following item : A. Nominal Resistance and Resistance Tolerance B. Power Rating and Size C. Quantity and description D. Part No. E. Lot No. Ex.

reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Packing Specification: Tape dimensions (mm) A. Paper Taping Type A±0.2 B±0.2 C±0.05 ØD+0.1 0201 0.40 ±0.05 0.70 Type A±0.2 B±0.2 C±0.05 ØD+0.1 B. Embossed Taping Type A ±0.2 B ±0.2 C ±0.05 ØD+0.1 ØD1+0.1 E ±0.1 F ±0.05 G ±0.1 W ±0.2 T ±0.1 * Peeling Strength of Top Cover Tape Test Condition: 0.1 to 0.7 N at a peel-off speed of 300 mm / min.

reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Reel Dimension (mm) Type Taping Reel Quantity

0201 Papar 10,000 2 13 21 60 178 10

0402 Paper 10,000 2 13 21 60 178 10

0603 Paper 5,000 2 13 21 60 178 10

0805 Paper 5,000 2 13 21 60 178 10

1206 Paper 5,000 2 13 21 60 178 10

1210 Paper 5,000 2 13 21 60 178 10

2010 Embossed 4,000 2 13 21 60 178 13.8 2512 Embossed 4,000 2 13 21 60 178 13.8 How To Order CRG 0603 F 10K Common Part Size Tolerance Resistance Value CRG - Thick Film Chip Resistor 0201 0402 0603 0805 1206 1210 2010 2512 F - ±1% ϭ ohŵ ;ϭΩͿ ϭRϬ ϭK ohŵ ;ϭϬϬϬΩͿ ϭKϬ ϭϬϬK ohŵ ;ϭϬϬϬϬϬΩͿ 100K ϭM ohŵ ;ϭϬϬϬϬϬϬΩͿ ϭMϬ

Product Information

CRG1206F220R specifications and overview.

Summary

THICK FILM CHIP RESISTORS

Description

THICK FILM CHIP RESISTORS

Source title CRG1206F220R Datasheet(PDF) - TE Connectivity Ltd

Related Parts

More parts from the same family.

Browse manufacturer