CRG07 TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

TOSHIBA Rectifier Silicon Diffused Type CRG07 General Power Supply Rectification

  • Average forward current : IF(AV) = 0.7 A
  • Repetitive peak reverse voltage : VRRM = 400 V
  • Small, thin package suitable for high-density board assembly Toshiba Nickname: S-FLATTM Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Repetitive peak reverse voltage VRRM 400 V Average forward current (Note 1) I F(AV) 0.7 A Non-repetitive peak forward surge current (50 Hz) IFSM 15 A Junction temperature (Note 2) Tj 175 °C Storage temperature (Note 2) T stg -55 to 175 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1 : Ta = 111°C Device mounted on a ceramic board Board size : 50 mm × 50 mm Soldering size : 2 mm × 2 mm Board thickness : 0.64 mm Half Sine Waveform Conduction angle 180° Note 2: The definitions of maximum rating condition for both junction temperature and storage temperature range are referred from AEC-Q101. Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Peak forward voltage VFM (1) I FM = 0.1 A (pulse test) ― 0.88 ― V VFM (2) I FM = 0.7 A (pulse test) ― 1 .0 1.1 VFM (3) I FM = 1 A (pulse test) ― 1.1 ― Repetitive peak reverse current IRRM V RRM = 400 V (pulse test) ― ― 10 μA Thermal resistance Rth (j-a) Device mounted on a ceramic board (board size: 50 mm × 50 mm) (soldering land: 2 mm × 2 mm) (board thickness: 0.64 mm) ― ― 65 °C/W Device mounted on a glass-epoxy board (board size: 50 mm × 50 mm) (soldering land: 6 mm × 6 mm) (board thickness: 1.6 mm) ― ― 130 Unit: mm JEDEC ― JEITA ― TOSHIBA 3- 2A1A Weight: 0.013 g (typ.) Start of commercial production 2007-02

Abbreviation Code Part No. G7 CRG07 Land Pattern Dimensions (for reference only) Handling Precaution 1) Th e absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded during operation, even for an instant. The following are the general derating methods that we recommend when you design a circuit with a device. V RRM: Use this rating with reference to the above. VRRM has a temperature coefficient of 0.1%/°C. Take this temperature coefficient into account designing a device at low temperature. IF(AV): We recommend that the worst case current be no greater than 80% of the absolute maximum rating of IF(AV) and Tj be below 120°C. When using this device, take the margin into consideration by using an allowable Ta max-IF(AV) curve. IFSM: This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation, which seldom occurs during the lifespan of the device. T j: Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a T j of below 120°C. 2) Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value. 3) Please refer to the Rectifiers databook for further information. 2.8 1.2 1.2 Unit: mm Part No.(or abbreviation code) Cathode mark and Lot code

0.2 0.6 0 0.2 0.6 0.4 0.8 0.8 0.4 Ta max – IF (AV) Instantaneous forward voltage V F (V) IF – VF Instantaneous forward current I F (A) Average forward current IF (AV) (A) PF (AV) – IF (AV) Average forward power dissipation PF (AV) (W) Average forward current IF (AV) (A) Ta max – IF (AV) Maximum allowable ambient temperature Ta max ( °C) Average forward current IF (AV) (A) Maximum allowable ambient temperature Ta max ( °C) 0.4 0.8 0.01 0.1 1.2 2 1.6 2.8 25°C Tj = 175°C Pulse test Number of cycles Peak Repetitive Forward Current Peak repetitive forward current IFRM (A) 180 0.4 1.2 120 100 0.2 0.6 140 0.8 1 0 180 0.4 0.6 1 1.2 120 100 0.2 0.8 140 Conduction angle 180° 0° 180° Half Sine Waveform Time t (s) rth (j-a) – t Transient thermal resistance rth (j-a) (°C/W) 160 160 1 100 10 2.4 Conduction angle 180° 0° 180° Half Sine Waveform Ta = 25°C f = 50 Hz Half Sine Waveform Conduction angle 180° 0° 180° Half Sine Waveform Device mounted on a ceramic board: Board size : 50 mm × 50 mm, Soldering land : 2 mm × 2 mm Board thickness : 0.64 mm Device mounted on a glass-epoxy board: Board size : 50 mm × 50 mm Soldering land : 6 mm × 6 mm Board thickness : 1.6 mm (2) (1) (1) Device mounted on a ceramic board: Board size: 50 mm × 50 mm Soldering land: 2 mm × 2 mm Board thickness: 0.64 mm (2) Device mounted on a glass-epoxy board: Board size: 50 mm × 50 mm Soldering land: 6 mm × 6 mm Board thickness: 1.6 mm 1000 10000 0.001 0.01 0.1 100 1 10 100

RESTRICTIONS ON PRODUCT USE

  • Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice.
  • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
  • Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
  • PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MA Y CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative.
  • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
  • P roduct shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.
  • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
  • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
  • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
  • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.