R8-ND1 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: R8-ND1 R8-ND1 SPECIFICATIONS ES-9749 Rev.5 Page 1/4 http://www.m-system.co.jp/ Remote I/O R8 Series POWER/NETWORK MODULE (DeviceNet) Functions & Features

  • Free combination of analog and discrete I/O
  • Space-saving Typical Applications
  • Remote I/O for DCS and PLC 50 (1.97) 115 (4.53) mm (inch) 55 (2.17) MODEL: R8–ND1–R[1]

ORDERING INFORMATION

  • Code number: R8-ND1-R[1] Specify a code from below for [1]. (e.g. R8-ND1-R/Q)
  • Specify the specification for option code /Q (e.g. /C01) MODULE TYPE ND1: DeviceNet POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.) [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating

RELATED PRODUCTS

  • PC Configurator cable (model: COP-US)
  • PC configurator software (model: R8CFG)
  • EDS file The EDS files and configurator software are downloadable at M-System’s web site. PACKAGE INCLUDES...
  • Protective cover GENERAL SPECIFICATIONS Connection
  • Power input, excitation supply: Tension clamp (Front Twin connection) Applicable wire size: 0.2 - 2.5 mm2 Stripped length: 10 mm
  • DeviceNet: Tension clamp (Front Twinconnection)
  • Internal bus, internal power and excitation supply: Connector Max. number of I/O modules: 16 (Max. consumption current of I/O modules: 1.6 A) Isolation: DeviceNet to internal bus or internal power or power input to exc. supply to FE1 Status indicators: Power, RUN, NS, MS Data allocation: Mode 1, 2 DeviceNet COMMUNICATION Node address setting: Set with rotary switch; 00 – 63 Baud rate setting: Set with rotary switch; 125 kbps, 250 kbps, 500 kbps Transmission cable: Approved for DeviceNet Stripped length 10 mm I/O data allocation size: 8 to 64 words (variable) INSTALLATION Power consumption
  • DC: Approx. 12 W 24 V DC (@ internal power max. current

1.6 A) )

Internal power supply (power supply for I/O module):

  • DC power supply: 5 V DC
  • Current capacity: 1.6 A Excitation supply output (excitation for I/O module)
  • DC: 24 V DC ±10 %
  • Operational current: 10 A (From power supply (exitation supply) connector, via connector for internal bus, supplied to each I/O module. Power output current consumption must be under operational current.) Supply voltage to network: 11 – 25 V DC supplied through the network terminal block

MODEL: R8-ND1 R8-ND1 SPECIFICATIONS ES-9749 Rev.5 Page 2/4 http://www.m-system.co.jp/ Supply current to network: 50 mA max. Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: DIN rail Weight: 180 g (0.40 lb) PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (DeviceNet to internal bus or internal power or power input to exc. supply to FE1) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 EXTERNAL VIEW DeviceNet Connector ˙ FRONT VIEW On Power RUN MS NS NODE ADD. X10 RATE Connector for Power Supply and Excitation Supply Miniature Jack Connector for Configuration Function Setting DIP SW Internal Bus Connector Baud Rate Setting Rotary SW Status Indicator LED Node Address Setting Rotary SW LED STATE COLOR TO INDICATE Power ON Green Power supplied RUN ON / Blink Green Turns on or blinks depending on the status MS ON Green Normal operation ON Red Critical failure Blink Minor failure NS ON Green Connections are established Blink Connections are not established ON Red Critical Link failure Blink Minor Link failure

MODEL: R8-ND1 R8-ND1 SPECIFICATIONS ES-9749 Rev.5 Page 3/4 http://www.m-system.co.jp/ CONNECTION DIAGRAMS ■ POWER SUPPLY, EXCITATION SUPPLY CONNECTOR TERMINAL ASSIGNMENT Printed-circuit board connector (Phoenix Contact) Unit side connector: MSTBV2,5/5-GF-5,08AU Cable side connector: TFKC2,5/5-STF-5,08AU PIN ID FUNCTION No. 1 24V Power supply 24V DC 2 0V Power supply 0V DC 3 + Excitation supply 24V DC 4 − Excitation supply 0V DC

5 FE1 Grounding

PIN ID FUNCTION No.

1 V – POWER (–)

2 CAN_L Signal Low

3 Drain Shield

4 CAN_H Signal High

5 V + POWER (+)

■ NETWORK CONNECTOR ASSIGNMENT Printed-circuit board connector (Phoenix Contact) Unit side connector : MSTBV2,5/5-GF-5,08AU Cable side connector : TFKC2,5/5-STF-5,08AU M EXTERNAL DIMENSIONS unit: mm (inch) ■UNIT 115 (4.53) 55 (2.17) DIN RAIL (35 mm wide) [4 (.16)]

MODEL: R8-ND1 R8-ND1 SPECIFICATIONS ES-9749 Rev.5 Page 4/4 http://www.m-system.co.jp/ ■PROTECTIVE COVER 5 (.20) 50 (1 .97) 115 (4.53) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Note: In order to improve EMC performance, bond the FE1 terminal to ground. Caution: FE1 terminal is NOT a protective conductor terminal. +24V FE1 POWER EXC. SUPPLY Comm. Circuit Control Circuit JACK CAN_H Drain CAN_L Power Circuit (non-isolated) BUS CONNECTOR INTERNAL POWER (5V) INTERNAL BUS EXC. SUPPLY (24V) PC CONFIGURATION JACK STATUS LED ROTARY SW DIP SW Isolation CONNECTOR TO OTHER DeviceNet DEVICES Specifications are subject to change without notice.