CR6CM-12A RENESAS

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • IT (AV) : 6 A
  • VDRM : 600 V
  • IGT : 10 mA
  • Non-Insulated Type
  • Planar Passivation Type Outline 2, 4 1. Cathode 2. Anode 3. Gate 4. Anode 1 2 3 (Package name: TO-220)

Applications

Switching mode power supply, regulator for autocycle, motor control, heater control, and other general purpose control Voltage class Parameter Symbol 12 Unit Repetitive peak reverse voltage V RRM 600 V Non-repetitive peak reverse voltage V RSM 720 V DC reverse voltage V R (DC) 480 V Repetitive peak off-state voltage V DRM 600 V DC off-state voltage V D (DC) 480 V

REJ03G1706-0100 Rev.1.00 Jul 03, 2008 Page 2 of 6 Parameter Symbol Ratings Unit Conditions RMS on-state current I T (RMS) 9.4 A Average on-state current I T (AV) 6 A Commercial frequency, sine half wave 180° conduction, Tc = 96°CNote1 Surge on-state current I TSM 90 A 50Hz sine half wave 1 full cycle, peak value, non-repetitive I2t for fusing I 2t 41 A 2s Value corresponding to 1 cycle of half wave 50Hz, surge on-state current Peak gate power dissipation P GM 5 W Average gate power dissipation P G (AV) 0.5 W Peak gate forward voltage V FGM 6 V Peak gate reverse voltage V RGM 10 V Peak gate forward current I FGM 2 A Junction temperature Tj – 40 to +125 °C Storage temperature Tstg – 40 to +125 °C Mass — 2.0 g Typical value

Electrical Characteristics

Parameter Symbol Min. Typ. Max. Unit Test conditions Repetitive peak reverse current I RRM — — 2.0 mA Tj = 125°C, V RRM applied Repetitive peak off-state current I DRM — — 2.0 mA Tj = 125°C, V DRM applied On-state voltage V TM — — 1.7 V Tc = 25°C, ITM = 20 A, instantaneous value Gate trigger voltage VGT — — 1.0 V Tj = 25°C, V D = 6 V, IT = 1 A Gate non-trigger voltage VGD 0.2 — — V Tj = 125°C, V D = 1/2 VDRM Gate trigger current I GT — — 10 mA Tj = 25°C, V D = 6 V, IT = 1 A Holding current I H — 15 — mA Tj = 25°C, V D = 12 V Thermal resistance R th (j-c) — — 2.5 °C/W Junction to case Note1 Note2 Notes: 1. Case temperature is measured at anode tab 1.5 mm away from the molded case. 2. The contact thermal resistance R th (c-f) in case of greasing is 1.0°C/W.

REJ03G1706-0100 Rev.1.00 Jul 03, 2008 Page 3 of 6 Performance Curves Maximum On-State Characteristics On-State Current (A) On-State Voltage (V) Rated Surge On-State Current Surge On-State Current (A) Conduction Time (Cycles at 50Hz) Maximum Transient Thermal Impedance Characteristics (Junction to case) Transient Thermal Impedance (°C/W) Time (s) Gate Trigger Voltage vs. Junction Temperature Junction Temperature (°C) Gate Voltage (V) Gate Current (mA) Gate Trigger Current vs. Junction Temperature Junction Temperature (°C) Gate Characteristics × 100 (%) Gate Trigger Current (Tj = t°C) Gate Trigger Current (Tj = 25°C) × 100 (%) Gate Trigger Voltage (Tj = t°C) Gate Trigger Voltage (Tj = 25°C) 100 571 0 1 23 57 1 0 2 23 5 23 571 03 102 101 10–1 IGT = 10mA PGM = 5W VGD = 0.2V IFGM = 2A PG(AV) = 0.5W –60 –40 –20 0 20 40 60 80 100 120 140 103 102 101 Typical Example VFGM = 6V VGT = 1V 102 10–1 100 101 100 10–3 10–2 10–1 101 501 4 23 103 102 101 100 Tc = 125°C 100 25 1 0 1 37 1 0 242 5 374 120 160 200 100 140 180 60–40–60 0 20 40 80 100120 140 103 102 101 100 –20 Typical Example

REJ03G1706-0100 Rev.1.00 Jul 03, 2008 Page 4 of 6 Maximum Average Power Dissipation (Single-Phase Half Wave) Average Power Dissipation (W) Average On-State Current (A) Allowable Case Temperature vs. Average On-State Current (Single-Phase Half Wave) Case Temperature (°C) Average On-State Current (A) Allowable Case Temperature vs. Average On-State Current (Single-Phase Full Wave) Allowable Case Temperature vs. Average On-State Current (Rectangular Wave) Case Temperature (°C)Case Temperature (°C) Maximum Average Power Dissipation (Single-Phase Full Wave) Average Power Dissipation (W) Average On-State Current (A) Average On-State Current (A) Average On-State Current (A) Maximum Average Power Dissipation (Rectangular Wave) Average Power Dissipation (W) Average On-State Current (A) θ θ 360° Resistive loads θ 360° Resistive, inductive loads 0 120 842 106 θ = 30° 60° 120° 90° 180° θ 360° Resistive, inductive loads 160 120 140 100 0 120 482 61 0 θ = 30° 60° 120° 90° 180° θ 360° Resistive, inductive loads 0 120 84 1062 θ = 30° 60° 120° 90° 180° 160 120 140 100 0 120 48 1026 θ = 30° 60° 120° 90° 180° θ θ 360° Resistive loads 0 120 84 1062 θ = 30° 60° 120° 90° 180° 270° DC θ 360° Resistive, inductive loads 160 120 140 100 0 120 48 1026 θ = 30° 120° 180° DC 270° 90° 60°

REJ03G1706-0100 Rev.1.00 Jul 03, 2008 Page 5 of 6 Breakover Voltage vs. Junction Temperature Junction Temperature (°C) × 100 (%) Breakover Voltage (Tj = t°C) Breakover Voltage (Tj = 25°C) Breakover Voltage vs. Rate of Rise of Off-State Voltage Rate of Rise of Off-State Voltage (V/µs) × 100 (%) Breakover Voltage (dv/dt = vV/µs) Breakover Voltage (dv/dt = 1V/µs) × 100 (%) Holding Current (Tj = t°C) Holding Current (Tj = 25°C) Holding Current vs. Junction Temperature Junction Temperature (°C) 102 2310–1 571 0 0 23 57 1 0 1 23 57 1 0 2 103 101 Turn-Off Time vs. Junction Temperature Turn-Off Time (µs) Junction Temperature (°C) Gate Trigger Current vs. Gate Current Pulse Width × 100 (%) Gate Trigger Current (tw) Gate Trigger Current (DC) Junction Temperature (°C) × 100 (%) Repetitive Peak Reverse Voltage (Tj = t°C) Repetitive Peak Reverse Voltage (Tj = 25°C) Gate Current Pulse Width (µs) Repetitive Peak Reverse Voltage vs. Junction Temperature Typical Example 160 120 140 100 0–60 –40 –20 0 20 40 60 80 100 120 140 Typical Example 23101 571 0 2 23 57 1 0 3 23 57 1 0 4 160 120 140 100 Typical Example Tj = 125°C 103 102 101 –60 –40 –20 0 20 40 60 80 100 120 140 Typical Example 0 1600 40 80 120 14020 60 100 IT = 6A, –di/dt = 5A/ µs, VD = 300V, dv/dt = 20V/µs VR = 50V Typical Example Distribution 160 120 140 100 0–60 –40 –20 0 20 40 60 80 100 120 140 Typical Example

REJ03G1706-0100 Rev.1.00 Jul 03, 2008 Page 6 of 6 Package Dimensions SC-46 2.0g MASS[Typ.] PRSS0004AA-A RENESAS CodeJEITA Package Code Previous Code Unit: mm 10.5Max 4.5 1.3 2.542.54 0.8 1.0 φ3.6 2.60.5 4.5Max 12.5Min 16Max 3.8Max 7.0 3.2 Package Name TO-220 Order Code Lead form Standard packing Quantity Standard order code Standard order code example Straight type Vinyl sack 100 Type name CR6CM-12A Lead form Plastic Magazine (Tube) 50 Type name – Lead forming code CR6CM-12A-A8 Note : Please confirm the specificat ion about the shipping in detail.

Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Renesas Technology Singapore Pte. Ltd.

1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632

Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 RENESAS SALES OFFICES © 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2