CR6-06S-3.96E HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
3.96mm Pitch Card Edge Connector CR6 Series I Product Specifications Rating Current rating: 5A Voltage rating: 600V AC Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40to 80% Storage Temperature Range: -10 to +60ç (Note 2) Storage Humidity Range: 40to 70 (Note 2) Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature R ange and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. 500V DC 1800V AC/1 minute. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% 500 cycles Manual soldering: 300ç for 3 seconds 5000M ohms min. No flashover or insulation breakdown. 6m ohms max. No electrical discontinuity of 10µs or more Insulation resistance: 1000Mohmsmin. Contact resistance: 6mohmsmax. No deformation of components affecting performance. No damage, cracks, or parts looseness. (-65ç: 30 minutes¡ 15 to 35ç: 5 minutes max.¡ 125ç: 30 minutes¡ 15 to 35ç: 5 minutes max.) 5 cycles 1.Insulation Resistance 2.Withstanding Voltage 3.Contact Resistance Vibration 5.Humidity(Steady state) 6.Temperature Cycle 7.Durability (Mating/un-mating) 8.Resistance to Soldering heat Connection Method Eyelet Open End Through hole I Features 1. Contact Type Uses the tuning fork contact, where the contact pitch is 3.96mm. 2. Variation in number of contacts 6, 10, 12, 15, 18, 22, 28, 36 contacts are available. 3. Connection Type Eyelet, open end and through hole types are available. 4. Prevents mis-insertion in the board Using the polarizing key prevents mis-insertion in the printed board. Item Specification Condition
Parts Material Finish Remarks I Ordering Information CR6 – 22S – 3.96 E qe wr rContact type E : Eyelet type OE : Open end type DS : Through hole type qSeries Name : CR6 wNumber of contacts: 6, 10, 12, 15, 18, 22, 28, 36 eContact pitch : 3.96mm BContact Type (1) Eyelet (2) Open End (3) Through hole
BPCB Cutouts BContact No. Alignment List NOTE 1 : To utilize alphabetic symbols, following 8 alphabetic characters are not used. G. I, O, Q, g, i, o, q NOTE 2 : The above pattern is viewed from the contact (connection) side. Unit: mm Number of Contacts 6 10 12 15 18 22 28 36 NOTE : 11.1mm for 28, 36 contacts CPart Number CL No. B D EANumber of Contacts 38.9 86.5 31.47 75.5 19.8 61 54.8 47.3 43.8 35.64 81 74.6 67.2 63.6 55.44 67.32 22 109 102.4 95 91.3 83.16 36 166 158 150 146.8 138.66 CR6-06S-3.96E CR6-06S-3.96DS CR6-10S-3.96E CR6-10S-3.96DS CR6-12S-3.96E CR6-12S-3.96DS CR6-15S-3.96E CR6-15S-3.96DS CR6-18S-3.96E CR6-18S-3.96OE CR6-18S-3.96DS CR6-22S-3.96E CR6-22S-3.96OE CR6-22S-3.96DS CR6-28S-3.96E CR6-28S-3.96OE CR6-28S-3.96DS CR6-36S-3.96E CR6-36S-3.96DS 506-0019-8 506-0022-2 506-0001-2 506-0013-1 506-0023-5 506-0026-3 506-0002-5 506-0014-4 506-0003-8 506-0007-9 506-0015-7 506-0004-0 506-0008-1 506-0016-0 506-0031-3 506-0032-6 506-0034-1 506-0027-6 506-0030-0 Unit: mm or NOTE
Unit: mm NOTE : Using the polarizing key prevents mis-insertion in the printed board. To use the polarizing key, insert the polarizing key so as to hit the mold bottom. Part Number CL No. Material Color CR6-GPIN (A) 506-0018-5 ABS Gray I Polarizing Key A B 19.8 27.8 Number of Contacts 10 35.64 43.60 43.56 51.50 55.44 63.40 67.32 75.30 83.16 91.10 106.98 114.90 138.68 146.60