CR-A-AS_V01 BOURNS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 11

Technical content

Features

n Power rating up to 1 watt @ 70 °C n RoHS compliant* n Halogen free** n Sulfur -resistant design (ASTM B-809) n AEC-Q200 compliant Additional Information Click these links for more information: PRODUCT SELECTOR TECHNICAL LIBRARY INVENTORY SAMPLES CONTACT

Electrical Characteristics

Model No. CR01005A-AS CR0201A-AS CR0402A-AS CR0603A-AS CR0805A-AS Operating Temp. Range -55 to +125 °C -55 to +155 °C Derated to Zero Load at +125 °C +155 °C Maximum Working Voltage (1) 15 V 25 V 50 V 75 V 150 V Maximum Overload Voltage 30 V 50 V 100 V 150 V 300 V Resistance Tolerance ±1 %, ±5 % Temperature Coefficient @ 1 % (E24 + E96) 1 Ω ~ 9.76 Ω -200 ~ +600 ppm/°C 100 Ω ≤ R ≤ 1M Ω ±200 ppm/°C 10 Ω ≤ R ≤ 100 Ω ±300 ppm/°C 1 Ω ~ 9.76 Ω -200 ~ +600 ppm/°C 10 Ω ~ 3M Ω +200 ppm/°C 1 Ω ~ 9.76 Ω -200 ~ +400 ppm/°C 100 Ω ≤ R ≤ 1M Ω ±100 ppm/°C 10 Ω ≤ R < 100 Ω 1M Ω < R ≤ 10M Ω ±200 ppm/°C 1 Ω ~ 9.76 Ω -200 ~ +400 ppm/°C 100 Ω ≤ R ≤ 1M Ω ±100 ppm/°C 10 Ω ≤ R < 100 Ω 1M Ω < R ≤ 10M Ω ±200 ppm/°C Temperature Coefficient @ 5 % (E24) 1 Ω ~ 9.1 Ω -200 ~ +600 ppm/°C 10 Ω ~ 10M Ω +200 ppm/°C 1 Ω ~ 9.1 Ω -200 ~ +400 ppm/°C 10 Ω ≤ R ≤ 10M Ω ±200 ppm/°C 10M Ω ≤ R ≤ 20M Ω ±400 ppm/°C 1 Ω ~ 9.1 Ω -200 ~ +400 ppm/°C 10 Ω ≤ R ≤ 10M Ω ±200 ppm/°C 10M Ω ≤ R ≤ 20M Ω ±400 ppm/°C Zero Ohm Jumper ≤ 0.05 Ω Rated / Max. Current 0.5 A / 1 A 1 A / 2.5 A 1 A / 2.5 A 2 A / 5 A (1) Maximum Working Voltage is calculated with formula V= √P*R with the maximum value from the Electrical Characteristics table. Environmental Characteristics Moisture Sensitivity Level * RoHS Directive 2015/863, Mar 31, 2015 and Annex. Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) conte nt is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov AUTOMOTIVE GRADE

CR-A-AS Series - Sulfur-Resistant, AEC-Q200 Compliant Chip Resistors Electrical Characteristics (continued) Characteristic Model No. CR1206A-AS CR1210A-AS CR2010A-AS CR2512A-AS Power Rating @ 70 °C 0.25 W 0.33 W 0.5 W 1 W Operating Temp. Range -55 to +155 °C Derated to Zero Load at +155 °C Maximum Working Voltage (1) 200 V Maximum Overload Voltage 400 V Resistance Tolerance ±1 %, ±5 % Temperature Coefficient @ 1 % (E24 + E96) 1 Ω ~ 9.76 Ω -200 ~ +400 ppm/°C 10 Ω ≤ R ≤ 1M Ω ±100 ppm/°C 1M Ω < R ≤ 10M Ω ±200 ppm/°C Temperature Coefficient @ 5 % (E24) 1 Ω ~ 9.1 Ω -200 ~ +400 ppm/°C 10 Ω ≤ R ≤ 10M Ω ±200 ppm/°C 10M Ω < R ≤ 20M Ω ±400 ppm/°C 10M < R ≤ 20M Ω ±400 ppm/°C Zero Ohm Jumper ≤ 0.05 Ω Rated / Max. Current 2 A / 5 A (1) Maximum Working Voltage is calculated with formula V= √P*R with the maximum value from the Electrical Characteristics table. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CR-A-AS Series - Sulfur-Resistant, AEC-Q200 Compliant Chip Resistors Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Product Dimensions L W C T D DIMENSIONS: MM (INCHES) Model L W C D T CR01005A-AS 0.40 ± 0.02 (.016 ± .0008) 0.20 ± 0.02 (.008 ± .0008) 0.10 ± 0.03 (.004 ± .001) 0.10 ± 0.03 (.004 ± .001) 0.13 ± 0.02 (.005 ± .0008) CR0201A-AS 0.60 ± 0.03 (.024 ± .001) 0.30 ± 0.03 (.012 ± .001) 0.10 ± 0.05 (.004 ± .002) 0.15 ± 0.05 (.006 ± .002) 0.23 ± 0.03 (.009 ± .001) CR0402A-AS 1.00 +0.10/ 0.05 (.039 +.004/-.002) 0.50 ± 0.05 (.020 ± .002) 0.20 ± 0.10 (.008 ± .004) 0.25 ± 0.10 (.010 ± .004) 0.32 ± 0.05 (.013 ± .002) CR0603A-AS 1.60 ± 0.10 (.063 ± .004) 0.80 ± 0.10 (.031 ± .004) 0.30 ± 0.20 (.012 ± .008) 0.30 +0.20/-0.10 (.012 +.008/-.004) 0.45 ± 0.10 (.018 ± .004) CR0805A-AS 2.00 ± 0.10 (.079 ± .004) 1.25 ± 0.10 (.049 ± .004) 0.40 ± 0.20 (.016 ± .008) 0.40 ± 0.20 (.016 ± .008) 0.50 ± 0.10 (.020 ± .004) CR1206A-AS 3.10 ± 0.10 (.122 ± .004) 1.55 ± 0.10 (.061 ± .004) 0.50 ± 0.30 (.020 ± .012) 0.40 ± 0.20 (.016 ± .008) 0.55 ± 0.10 (.022 ± .004) CR1210A-AS 3.10 ± 0.10 (.122 ± .004) 2.55 ± 0.10 (.100 ± .004) 0.50 ± 0.30 (.020 ± .012) 0.40 ± 0.20 (.016 ± .008) 0.60 ± 0.10 (.024 ± .004) CR2010A-AS 5.00 ± 0.15 (.197 ± .006) 2.50 ± 0.15 (.098 ± .006) 0.60 ± 0.30 (.024 ± .012) 0.50 ± 0.25 (.020 ± .010) 0.60 ± 0.10 (.024 ± .004) CR2512A-AS 6.30 ± 0.20 (.248 ± .008) 3.20 ± 0.20 (.126 ± .008) 0.60 ± 0.30 (.024 ± .012) 0.50 ± 0.25 (.020 ± .010) 0.60 ± 0.10 (.024 ± .004)

CR-A-AS Series - Sulfur-Resistant, AEC-Q200 Compliant Chip Resistors Recommended Pad Layout a RESISTOR b c DIMENSIONS: MM (INCHES) Model a b c CR01005A-AS 0.15 ~ 0.20 (.006 ~ .008) 0.50 ~ 0.70 (.020 ~ .028) 0.20 ~ 0.25 (.008 ~ .010) CR0201A-AS 0.25 ~ 0.30 (.010 ~ .012) 0.70 ~ 0.90 (.028 ~ .035) 0.30 ~ 0.40 (.012 ~ .016) CR0402A-AS 0.50 ~ 0.60 (.020 ~ .024) 1.40 ~ 1.60 (.055 ~ .063) 0.40 ~ 0.60 (.012 ~ .024) CR0603A-AS 0.70 ~ 0.90 (.028 ~ .035) 2.00 ~ 2.20 (.079 ~ .087) 0.80 ~ 1.00 (.031 ~ .039) CR0805A-AS 1.00 ~ 1.40 (.039 ~ .055) 3.20 ~ 3.80 (.126 ~ .150) 0.90 ~ 1.40 (.035 ~ .055) CR1206A-AS 2.00 ~ 2.40 (.079 ~ .094) 4.40 ~ 5.00 (.173 ~ .197) 1.20 ~ 1.80 (.047 ~ .071) CR1210A-AS 2.00 ~ 2.40 (.079 ~ .094) 4.40 ~ 5.00 (.173 ~ .197) 2.30 ~ 3.50 (.091 ~ .138) CR2010A-AS 3.30 ~ 3.70 (.130 ~ .146) 5.70 ~ 6.50 (.224 ± .256) 2.30 ~ 3.50 (.091 ~ .138) CR2512A-AS 3.60 ~ 4.00 (.142 ~ .157) 7.60 ~ 8.60 (.299 ~ .339) 2.30 ~ 3.50 (.091 ~ .138) Soldering Profile 125 175 225 275 05 0 100 150 200 250 300 Time (Seconds) Temperature (°C) 60 - 120 seconds 60 - 90 seconds 260 °C peak 190 °C 150 °C 220 °C Ramp Down 6 °C/second 255 °C Maximum of 20 seconds between +255 °C and +260 °C Ramp Up 3 °C/second maximum 10 seconds minimum <1> <1> Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CR-A-AS Series - Sulfur-Resistant, AEC-Q200 Compliant Chip Resistors Performance Characteristics (AEC-Q200) Test Method Procedure Test Limits ∆R Short Time Overload IEC 60115-1 4.13 2.5 X rated voltage for 5 sec. ± (1 % + 0.05 Ω ) Remarks: 0 Ω : 50 mΩ or less High Temperature Exposure (Storage) AEC-Q200-REV D-Test 3 MIL-STD-202 Method 108 1000 hrs. @ T=155 °C. Unpowered. Measurement at 24 ±2 hours after test conclusion. 0 Ω: 50 mΩ or less Temperature Cycling AEC-Q200-REV D-Test 4 JESD22 Method JA-104 1000 cycles (-55 °C to +125 °C) Measurement at 24 ±4 hours after test conclusion. 30 min. maximum dwell time at each temperature extreme. 1 min. maximum transition time. ± (1.0 % + 0.1 Ω) 0 Ω: 50 mΩ or less Moisture Resistance AEC-Q200-REV D-Test 6 MIL-STD-202 Method 106 T=24 hours / Cycle,10 Cycles. Notes: Steps 7a & 7b not required. Unpowered. 0 Ω: 50 mΩ or less Biased Humidity AEC-Q200-REV D-Test 7 MIL-STD-202 Method 103 1000 hours 85 °C / 85 % RH. Note: Specified conditions: 10 % of operating power (not exceeding max. working voltage). Measurement at 24 ±2 hours after test conclusion. ± (3 % + 0.1 Ω) 0 Ω: 100 mΩ or less High Temperature Operational Life AEC-Q200-REV D-Test 8 MIL-STD-202 Method 108 1000 hours Ta=125 °C at 35 % rated power. Measurement at 24 ±4 hours after test conclusion. 0 Ω: 100 mΩ or less External Visual AEC-Q200-REV D-Test 9 MIL-STD-883 Method 2009 Electrical test not required. Inspect device construction, marking and workmanship. Physical Dimension AEC-Q200-REV D-Test 10 JESD22 Method JB-100 Verify physical dimensions to the applicable device detail spec. Note: User(s) and Suppliers spec. Electrical test not required. Resistance to Solvents AEC-Q200-REV D-Test 12 MIL-STD-202 Method 215 a: Isopropyl Alcohol : Mineral Spirits = 1:3 b: Terpene Defluxer (Bioact EC-7R) c: Deionized water : Propylene Glycol Monomethyl Ether : monoethanolamine = 42:1:1 Marking and protective layer cannot be detached Mechanical Shock AEC-Q200-REV D-Test 13 MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100 grams. Normal duration (D) is 6 ms. ± (1 % + 0.1 Ω) 0 Ω: 50 mΩ or less Vibration AEC-Q200-REV D-Test 14 MIL-STD-202 Method 204 5 grams for 20 min., 12 cycles each of 3 orientations. Note: Test from 10-2000 Hz. ± (1 % + 0.1 Ω) 0 Ω: 50 mΩ or less Resistance to Soldering Heat AEC-Q200-REV D-Test 15 MIL-STD-202 Method 210 Condition B: Immerse the specimens in and eutectic solder at 260 ±5 ℃ for 10 ±1 S. 0 Ω: 50 mΩ or less Thermal Shock AEC-Q200-REV D-Test 16 MIL-STD-202 Method 107 -55 °C / +155 °C. Note: Number of cycles required: 1000, Maximum transfer time: 20 seconds, Dwell time: 15 minutes. Air to Air. ± (1 % + 0.1 Ω) 0 Ω: 50 mΩ or less ESD AEC-Q200-REV D-Test 17 Verify the voltage setting at 500 V ± (1 % + 0.1 Ω) Solderability AEC-Q200-REV D-Test 18 J-STD-002 Method B, aging 4 hours at 155 °C dry heat Lead-free solder bath at 235 ±3 °C Dipping time: 3 ±0.5 seconds > 95 % area covered with tin Flammability AEC-Q200-REV D-Test 17 UL-94 V-0 or V-1 are acceptable. Electrical test not required. V-0 or V-1 Board Flex (Bending) AEC-Q200-REV D-Test 21 The duration of the applied forces shall be 60 (±5) seconds. 3 mm deflection (0201~1210) 2 mm deflection (2010~2512) 0 Ω: 50 mΩ or less Terminal Strength (SMD) IEC 60115-1 4.32 Force of 1.8 kg for 60 seconds. Note: 0201= N/A ± (0.5 % + 0.05 Ω) 0 Ω: 50 mΩ or less Sulfuration Test ASTM-B-809-95 Sulfur (saturated vapor) 1,000 hours, 105 ±2 °C, unpowered 01005/0201: 0 Ω: 100 mΩ or less

CR-A-AS Series - Sulfur-Resistant, AEC-Q200 Compliant Chip Resistors Derating Curve 100 Power Ratio (%) -55 20 40 60 80 125 CR01005A-AS CR0201A-AS 155 100 120 140 160 Ambient Temperature (°C) Packaging Dimensions (Conforms to EIA RS-481A) Model Tape Type A B W F E P1 P2 P0 T CR01005A-AS Paper Tape (2 mm pitch) 0.24 ± 0.05 (.010 ± .002) 0.45 ± 0.10 (.018 ± .004) 8.00 ± 0.20 (.315 ± .008) 3.50 ± 0.05 (.138 ± .002) 1.75 ± 0.10 (.069 ± .004) 2.00 ± 0.05 (.079 ± .002) 2.00 ± 0.05 (.079 ± .002) 4.00 ± 0.10 (.157 ± .004) 0.40 ± 0.10 (.016 ± .004) CR0201A-AS 0.37 ± 0.05 (.010 ± .002) 0.67 ± 0.10 (.026 ± .004) 0.37 ± 0.10 (.015 ± .004) CR0402A-AS 0.70 ± 0.05 (.028 ± .002) 1.20 ± 0.05 (.047 ± .002) 2.00 ± 0.10 (.079 ± .004) 2.00 ± 0.10 (.079 ± .004) 0.45 ± 0.10 (.018 ± .004) CR0603A-AS Paper Tape (4 mm pitch) 1.10 ± 0.10 (.043 ± .004) 1.90 ± 0.10 (.075 ± .004) 4.00 ± 0.10 (.157 ± .004) 2.00 ± 0.05 (.079 ± .002) 0.64 ± 0.10 (.025 ± .004) CR0805A-AS 1.60 ± 0.15 (.063 ± .006) 2.40 ± 0.20 (.094 ± .008) 0.84 ± 0.10 (.142 ± .008) CR1210A-AS 2.80 ± 0.20 (.110 ± .008) CR2010A-AS Embossed Tape (4 mm pitch) 2.80 ± 0.20 (.110 ± .008) 5.30 ± 0.20 (.472 ± .008) 5.50 ± 0.05 (.217 ± .002) 4.00 ± 0.05 (.157 ± .002) 0.85 ± 0.15 (.033 ± .006) CR2512A-AS 3.60 ± 0.20 (.142 ± .008) 6.90 ± 0.20 (.272 ± .008) 0.85 ± 0.15 (.033 ± .006) DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CR-A-AS Series - Sulfur-Resistant, AEC-Q200 Compliant Chip Resistors Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Packaging Dimensions (Conforms to EIA RS-481A) AT A A T T B B B W W W F E E E P1 P0P2 P2P1 P0 P2 P0 DIA.TOP TAPEBOTTOM TAPE PAPER TAPE (2 mm PITCH) PAPER TAPE (4 mm PITCH) EMBOSSED TAPE (4 mm PITCH) PAPER TAPE RESISTOR TOP TAPE TOP TAPE BOTTOM TAPE EMBOSSED TAPE PAPER TAPE RESISTOR RESISTOR F DIRECTION OF UNREELING DIRECTION OF UNREELING DIRECTION OF UNREELING F 1.50 (.059) MIN. DIA. 1.50 ± 0.10 (.059 ± .004) DIA.1.50 ± 0.10 (.059 ± .004) DIA.1.50 ± 0.10 (.059 ± .004) DIMENSIONS: MM (INCHES)

CR-A-AS Series - Sulfur-Resistant, AEC-Q200 Compliant Chip Resistors Packaging Dimensions (Conforms to EIA RS-481A) A DIA. B DIA. W T C DIA. Model Packaging Quantity A B C W T CR01005A-AS 10K pcs/reel 178 ± 2.0 (7.008 ± .079) 60 ± 1.0 (2.362 ± .039) 13.0 ± 1.0 (.512 ± .039) 9.0 ± 1.0 (.354 ± .039) 11.5 ± 1.0 (.453 ± .039) CR0201A-AS CR0402A-AS CR0603A-AS 5K pcs/reel CR0805A-AS CR1206A-AS CR1210A-AS CR2010A-AS 4K pcs/reel 13.0 ± 1.0 (.512 ± .039) 15.5 ± 1.0 (.610 ± .039) CR2512A-AS Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. DIMENSIONS: MM (INCHES)

CR-A-AS Series - Sulfur-Resistant, AEC-Q200 Compliant Chip Resistors Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. How to Order CR 0603 A F X - 1002 E AS Model (CR = Fixed Resistor) Size 01005 = 01005 size 0201 = 0201 size 0402 = 0402 size 0603 = 0603 size 0805 = 0805 size 1206 = 1206 size 1210 = 1210 size 2010 = 2010 size 2512 = 2512 size Feature A = AEC-Q200 Compliant Resistance Tolerance F = ±1 % J = ±5 % TCR (ppm/°C) – See Electrical Characteristics Chart X = ±100 W = ±200 V = ±300 Z = ±400 / = Used for zero Ω (jumper) and values from 1 Ω through 9.76 Ω. Resistance Value For 1 % Tolerance: For 5 % Tolerance: Packaging G = Paper Tape (10,000 pcs.) on 7 ” Reel – CR01005A-AS, CR0201A-AS, CR0402A-AS E = Paper Tape (5,000 pcs.) on 7 ˝ Reel – CR0603A-AS, CR0805A-AS, CR1206A-AS, CR1210A-AS E = Embossed Tape (4,000 pcs) on 7 ˝ Reel – CR2010A-AS, CR2512A-AS Termination AS = Anti-sulfur version, Tin-plated (RoHS Compliant)

CR-A-AS Series - Sulfur-Resistant, AEC-Q200 Compliant Chip Resistors Symbol for E96 Series Nominal Resistance Value Symbol E96 Symbol E96 Symbol E96 Symbol E96 01 100 25 178 49 316 73 562 02 102 26 182 50 324 74 576 03 105 27 187 51 332 75 590 04 107 28 191 52 340 76 604 05 110 29 196 53 348 77 619 06 113 30 200 54 357 78 634 07 115 31 205 55 365 79 649 08 118 32 210 56 374 80 665 09 121 33 215 57 383 81 681 10 124 34 221 58 392 82 698 11 127 35 226 59 402 83 715 12 130 36 232 60 412 84 732 13 133 37 237 61 422 85 750 14 137 38 243 62 432 86 768 15 140 39 249 63 442 87 787 16 143 40 255 64 453 88 806 17 147 41 261 65 464 89 825 18 150 42 267 66 475 90 845 19 154 43 274 67 487 91 866 20 158 44 280 68 499 92 887 21 162 45 287 69 511 93 909 22 165 46 294 70 523 94 931 23 169 47 301 71 536 95 953 24 174 48 309 72 549 96 976 Symbol for Multipliers Symbol A B C D E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 Marking Explanation 01A 1000 102 121 CR0805A-AS / CR1206A-AS / CR1210A-AS / CR2010A-AS / CR2512A-AS Resistance value is expressed by 3 digits. The first two digits represent the significant figures of nominal resistance value in Ω. The third digit represents exponent for base of 10. EX: 102 = 10 x 102 = 1000 Ω = 1K Ω ±1 % (E96): CR0805A-AS / CR1206A-AS / CR1210A-AS / CR2010A-AS / CR2512A-AS Resistance value is expressed by 3 digits. The first two digits represent the significant figures of nominal resistance value in Ω. The third digit represents exponent for base of 10. EX: 102 = 10 x 102 = 1000 Ω = 1K Ω 01A 1000 102 121 01A 1000 102 121 ±1 % (E96): CR0603A-AS When the marking space is too small in such small-sized resistors as CR0603A-AS, the marking cannot be made by 4 digits and may be made by two digits combined with one English capital. EX: 01A = 100 x 100 = 100 Ω 01A 1000 102 121 Resistance Value Not in E96 3 digits with underline in E24 series is used. EX: 121 = 120 x 101 = 1200 Ω or 1.2K Ω 01A 1000 102 121 CR0402A-AS When the marking space is too small in such small-sized resistors as CR0402A-AS, the marking cannot be made by 4 digits and may be represented by a dash. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. REV. 06/25 01A 1000 102 121 CR01005A-AS / CR0201A-AS No marking due to small size. Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 • Email: eurocus@bourns.com Mexico: Tel: +52 614 478 0400 • Email: mexicus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., IATF 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap- plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifi es Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 12/14/23R