CR23-6SA-4DS HIROSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

4mm Pitch Single Side Card Edge Connector CR23 Series I Features 1. 4mm pitch contact 2. Variation in number of contacts 6, 10, 14, 18, 20, and 22 contacts are available. 3. Connection method Eyelet and through hole types are available. 4. Prevents mis-insertion in the board Using the polarizing key prevents mis-insertion in the board. I Product Specifications Rating Current rating: 3A Voltage rating: 600V AC Operating Temperature Range :-30ç to +85ç (Note 1) Operating Humidity Range:40% to 80% Storage Temperature Range :-10 to+60ç (Note 2) Storage Humidity Range :40 to 70% (Note 2) Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature R ange and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. I Ordering information I Material Insulator Contact Polycarbonate Copper alloy Blue Tin plated or gold plated UL94V-0 Parts Material Finish Remarks 500V DC 1800V AC/1 minute Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% 500 cycles Manual soldering: 300ç for 3 seconds 5000M ohms No flashover or insulation breakdown. 15m ohms max. No electrical discontinuity of 10µs or more Insulation resistance :5000M min. Contact resistance: 30mohmsmax. No deformation of components affecting performance. No damage, cracks, or parts looseness. (-55ç: 30 minutes¡ 15 to 35ç: 5 minutes max.¡ 85ç: 30 minutes¡ 15 to 35ç: 5 minutes max.) 5 cycles 1.Insulation Resistance 2.Withstanding Voltage 3.Contact Resistance 4.Vibration Humidity (Steady state) 6.Temperature Cycle 7.Durability (Mating/un-mating) 8.Resistance to Soldering heat CR23 A – 6 S A – 4 DS qe wr t y u tA: Gold plating B: Tin plating yContact pitch: 4mm uContact type DS: Through hole type E : Eyelet type qSeries Name : CR23 wMold Type : A: Without mounting hole Blank: With Mounting hole eNumber of contacts: 6, 10, 14, 18, 22 rContact alignment: Single side Item Specification Condition

(1) Through hole (2) Eyelet (E) With mounting hole Through hole 6,10,14,18,20,22 contacts Eyelet (E) Tin plated Gold plated Without mounting hole

CR23-*SA-4DS CR23-*SA-4E CPart Number CL No. B D EANumber of Contacts 109 101 25.5 41.5 57.5 73.5 89.5 CR23-6SA-4DS CR23-6SA-4E CR23-10SA-4DS CR23-10SA-4E CR23-10SB-4E CR23-14SA-4DS CR23-14SA-4E CR23-14SB-4E CR23-18SA-4DS CR23-18SA-4E CR23-22SA-4DS CR23-22SA-4E 523-0025-6 523-0001-8 523-0029-7 523-0005-9 523-0007-4 523-0033-4 523-0009-0 523-0011-1 523-0037-5 523-0013-7 523-0045-3 523-0021-5 Unit: mm G Through hole Type G Eyelet Type

I Wihtout Mounting Hole Type G Through hole Type CR23A- *SA-4DS G Eyelet Type CR23A- *SA-4E CPart Number CL No. BANumber of Contacts 25.5 57.5 41.5 73.5 89.5 CR23A-6SA-4DS CR23A-6SA-4E CR23A-10SA-4DS CR23A-10SB-4DS CR23A-10SA-4E CR23A-10SB-4E CR23A-14SA-4DS CR23A-14SB-4DS CR23A-14SA-4E CR23A-14SB-4E CR23A-18SA-4E CR23A-22SB-4DS 523-0026-9 523-0002-0 523-0030-6 523-0032-1 523-0006-1 523-0008-7 523-0034-7 523-0036-2 523-0010-9 523-0012-4 523-0014-0 523-0048-1 Unit: mm

BContact No. Alignment List Number of Size Contacts 6 10 14 18 22 A B 101 Note 1:If alphabetic symbols are utilized, following 8 alphabetic characters are not used. G, I, O, Q, g, i, o, q Note 2 :The above pattern is viewed from the Contact (connection) side. Number of Size Contacts 6 10 14 18 22 A B 25.3 41.3 57.3 73.3 89.3 I Polarizing Key CL No.Part Number Material Finish 507-0055-8 564-0052-4 CR7C-GPIN HIF5B-GPIN Polyacetal PBT White Beige Note: Using the polarizing key prevents mis-insertion in the printed board. To use the polarizing key, insert the polarizing key so as to hit the mold bottom. CR7C-GPIN HIF5B-GPIN BPCB Dimensions