CR1000 | DigiCamel IC Datasheet

Online Datasheet

Read CR1000 online.

CR1000 CAMPBELL | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 2

Technical content

| SCIENTIFIC WHEN MEASUREMENTS MATTER ® CR1000 [ Overview The CR1000 is our most widely used datalogger. It can be used in a broad range of measurement and control functions. Rugged enough for extreme conditions and reliable enough for remote environments, it is also robust Benefits and Features ) Ideal applications include fire weather, mesonet systems, wind profiling, weather stations, air quality, ETo/agriculture, soil moisture, water level/stage, aquaculture, avalanche forecasting, time-domain reflectometry, vehicle testing, SCADA, and water quality ) Serial communications with serial sensors and devices supported via /O port pairs ) Collects and stores data and controls peripherals as the brain of your system ) Flexible power and communication options make it ideal for remote locations. ) 4-MB memory can be expanded with add-on memory systems. ) Supports PakBus, Modbus, SDI-12, and DNP3 protocols Technical Description The CR1000 consists of a measurement and control module and a wiring panel. This datalogger uses an external keyboard/display and power supply. Low power consumption allows the CR1000 to operate for extended time periods on a battery recharged with a solar panel— eliminating the need for AC power. The CR1000 suspends For comprehensive details, visit: www.campbellsci.eu/cr1 000 NEERNS CR100 Measurement and Control Datalogger Rugged Datalogger Multipurpose datalogger for monitoring and control enough for complex configurations. Used in applications all over the world, it will be a powerful core component for your data-acquisition system. ) Compatible with channel expansion peripherals allowing you to expand your system ) Program with LoggerNet, PC400, or Short Cut to fit your setup ) Communicates via various options: TCP/IP, email, FTP, web server. ) Gas Discharge Tube (GDT) protected inputs ) Battery-backed clock that ensures accurate time is maintained while data logger is disconnected from battery power ) Program and control on site with addition of CR1000KD keyboard and display unit. ) Contains custom ASIC chip that expands pulse count, control port, and serial communications capabilities execution when primary power drops below 9.6 V, reducing the possibility of inaccurate measurements. The CR1000's module measures sensors, drives direct communications and telecommunications, reduces data, controls external devices, and stores data and programs in on-board, non-volatile storage. The electronics are RF

shielded and glitch protected by the sealed, stainless-steel canister. A battery-backed clock assures accurate timekeeping. The module can simultaneously provide measurement and communication functions. The on-board, BASIC-like programming language supports data processing and analysis routines. The CR1000WP is a black, anodized aluminum wiring panel that is compatible with all CR1000 modules. The wiring panel includes switchable 12V, redistributed analog grounds (dispersed among analog channels rather than grouped), unpluggable terminal block for 12 V connections, gas-tube spark gaps, and 12 V supply on pin 8 to power our COM- Specifications -NOTE- Additional specifications are listed in the CR1000 Specifications Sheet. Operating Temperature Non-condensing environment Range -25°10 +50°C (standard) -55°10 +85°C (extended) 16 single-ended or 8 differential (individually configured) Analog Inputs Pulse Counters 2 Voltage Excitation Terminals3 (VX1 to VX3) Communications Ports Parallel peripheral RS-232 csi/o 1 terminal 81/0s or 4 RS-232 COM 1/0 ports can be paired as transmit and receive for measuring smart serial Sensors. Certain digital ports can be used to count switch closures. Switched 12 Volt Digital I/0 Input Limits +5Vdc Analog Voltage Accuracy +(0.06% of reading + offset) at 0° 10 40°C ADC 13-bit series phone modems and other peripherals. The control module easily disconnects from the wiring panel allowing field replacement without rewiring the sensors. Originally, the standard CR1000 had 2 MB of data/program storage, and an optional version, the CR1000-4M, had 4 MB of memory. In September 2007, the standard CR1000 started having 4 MB of memory, making the CR1000-4M obsolete. Dataloggers that have a module with a serial number greater than or equal to 11832 will have a 4 MB memory. The 4 MB dataloggers will also have a sticker on the canister stating "4M Memory”. Power Requirements 9.6 10 16 Vdc Real-Time Clock Accuracy +3 min. per year (Correction via GPS optional.) FTP, HTTP, XML, POP3, SMTP, Telnet, NTCIP, NTP Communication Protocols PakBus, Modbus, DNP3, SDI-12, SDM Warranty 3 years Battery-backed SRAM for 4 MB CPU Usage & Final Storage Internet Protocols Idle Current Drain, Average < 1mA (@ 12 Vdc) Active Current Drain, 28 mA (100 Hz sample rate @ Average 12 Vdc with RS-232 communication) 16 mA (100 Hz sample rate @

12 Vdc without RS-232

Product Information

CR1000 specifications and overview.

Summary

Measurement and Control Datalogger 12/12/2019

Description

Measurement and Control Datalogger 12/12/2019

Source title CR1000 Datasheet(PDF) - Campbell Scientific United Kingdom

Related Parts

More parts from the same family.

Browse manufacturer