CR0603-PF

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

■ Ultra-low lead (Pb) content* ■ Green technology ■ High reliability and stability ■ Thick film paste on high grade ceramic substrate ■ RoHS compliant without exemptions ■ Halogen free* Additional Information Click these links for more information: PRODUCT SELECTOR TECHNICAL LIBRARY INVENTORY SAMPLES CONTACT

Electrical Characteristics

CR0402-PF CR0603-PF CR0805-PF CR1206-PF Power Rating @ 70 °C 0.0625 W 0.10 W 0.125 W 0.25 W Operating Temperature Range -55 °C to +155 °C Derated to Zero Load at +155 °C Maximum Working Voltage 50 V 75 V 150 V 200 V Maximum Overload Voltage 100 V 150 V 300 V 400 V Resistance Range (±1 %, E24 + E96 Series) 1 Ω ≤ R ≤ 9.76 Ω -200 to +500 PPM/°C 1 Ω ≤ R ≤ 9.76 Ω ±400 PPM/°C 10 Ω ≤ R < 100 Ω ±200 PPM/°C 10 Ω ≤ R ≤ 1 MΩ ±100 PPM/°C 100 Ω ≤ R ≤ 1 MΩ

1 MΩ < R ≤ 10 MΩ

±200 PPM/°C Resistance Range (±5 %, E24 Series) 1 Ω ≤ R ≤ 9.1 Ω -200 to +500 PPM/°C 1 Ω ≤ R ≤ 9.1 Ω ±400 PPM/°C 10 Ω ≤ R ≤ 10 MΩ ±200 PPM/°C Zero Ohm Jumper ≤ 0.05 Ω Rated/Maximum Current 1 A / 2.5 A 2 A / 5 A For Standard Values Used in Capacitors, Inductors and Resistors, click here. Product Dimensions Model L W C d t DIMENSIONS: MM (INCHES) DIMENSIONS: MM (INCHES) L CC t dd W Recommended Solder Pad Layout Model a b c c a b RESISTOR WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * Such products may contain trace amounts of lead of less than 100 ppm. RoHS Directive 2015/863, Mar 31, 2015 and Annex. * Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; (c) the total Bromine (Br) & Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Applications

■ General purpose ■ Consumer ■ Industrial ■ Telecommunications ■ Computer technology CR-PF Series Ultra-Low Lead Content Thick Film Resistor Construction OVERCOAT (BLACK) CONDUCTOR Sn PLATING CERAMIC SUBSTRATE RESISTIVE ELEMENT Ni PLATING Rated Voltage The rated voltage is calculated by the following formula: V= P X R V: Rated Voltage (V) P: Rated Power (W) R: Resistance Value (Ω) Environmental Characteristics Storage Conditions (Solder: Sn96.5 / Ag3 / Cu05) Derating Curve Ambient Temperature (°C) 6020 40 80 100 120 140 160 155 70100 -55 Power Ratio (%) Solder Reflow Recommendations Process Materials Temperature Time Description Interval TP TP tp ts TT ORAMP-UP L TL t L T MAX.S T MIN. 25 °C PREHEAT S Temperature Time CRITICAL ZONE RAMP-DOWN 8 MINUTES MAX.t 25 *C TO PEAK Solder Profile Lead Free Assembly Average ramp-up rate (Tsmax to Tp) 3 °C / second max. Preheat: - Temperature Min. (Tsmin) - Temperature Max. (Tsmax) - Time (Tsmin to Tsmax) (ts) 150 °C 200 °C 60~150 seconds Time maintained above: - Temperature (TL) - Time (TL) 217 °C 60~120 seconds Peak Temperature (Tp) 260 °C Time within +0/-5 °C of actual Peak Temperature (Tp)2 10 seconds Ramp-down rate 6 °C / second max. Time 25 °C to Peak Temperature 8 minutes max. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CR-PF Series Ultra-Low Lead Content Thick Film Resistor Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. How to Order CR 0402 - F X - 1003 G PF Model CR = Thick Film Fixed Resistor Chip Size 0402 = 0402 Size 0603 = 0603 Size 0805 = 0805 Size 1206 = 1206 Size Resistance Tolerance F = ±1 % J = ±5 % TCR (See Electrical Characteristics chart) W = ±200 PPM/°C X = ±100 PPM/°C / = Used for zero ohm (jumper) and values from 1 ohm through 9.1 ohms Resistance Value 1 % Tolerance: (example: 8252 = 82.5K ohms) 5 % Tolerance: (example: 474 = 470K ohms; 000 = Jumper) Packaging G = 10,000 pieces on 180 mm (7 inch) plastic reel, paper tape - CR0402-PF E = 5,000 pieces on 180 mm (7 inch) plastic reel, paper tape - CR0603-PF, CR0805-PF, CR1206-PF Feature PF = Ultra-low Lead Content

CR-PF Series Ultra-Low Lead Content Thick Film Resistor Performance Characteristics Test Specification Procedure Test Limits ΔR Temperature Coefficient of Resistance IEC 60115-1-4.8 Short Time Overload IEC 60115-1-4.13 JIS-C5201-1-4.13 2.5 times rated power for 5 seconds ±(1 % + 0.05 Ω) Remarks: 0 Ω: 50 mΩ or less Intermittent Overload IEC 60115-1-4.39 JIS-C5201-1-4.39 3 times rated voltage or max. overloading voltage, 1 second “ON”, 25 seconds “OFF”, 10,000 cycles Remarks: 0402: 2.5 times rated voltage or max. overloading voltage ±(5 % + 0.1 Ω) Remarks: 0 Ω: 50 mΩ or less Endurance (Load Life) IEC 60115-1-4.25.1 JIS-C5201-1-4.25.1 1000 hours at rated voltage, +70 °C, 1.5 hours “ON”, 0.5 hour “OFF” Remarks: 0 Ω: 100 mΩ or less Load Life with Humidity IEC 60115-1-4.24 JIS-C5201-1-4.24 1000 hours at rated voltage, +40 ±2 °C, 90~95 % RH, 1.5 hours “ON”, 0.5 hour “OFF” Remarks: 0 Ω: 100 mΩ or less Rapid Change of Temperature IEC 60115-1-4.19 JIS-C5201-1-4.19 -55 °C (30 minutes) / +155 °C (30 minutes) 5 cycles Remarks: 0 Ω: 50 mΩ or less Solderability IEC 60115-1-4.17 JIS-C5201-1-4.17 245 ±5 °C solder for 2 ± 0.5 seconds; Solder: Sn96.5 / Ag3.0 / Cu0.5 At least 95 % of surface area of electrode shall be covered with new solder. Moisture No Load IEC 60115-1- 4.24.2.1a JIS-C5201-1- 4.24.2.1a +85 °C, 85 % RH, 1000 hours < ±0.5 % Temperature Cycle IEC 60115-1-4.19 JIS-C5201-1-4.19 -55 °C and +155 °C, 100 cycles, 15 minutes per extreme condition < ±0.5 % Resistance to Soldering Heat IEC 60115-1-4.18 JIS-C5201-1-4.18 260 ±5 °C for 10 ±1 seconds < ±0.5 % Robustness of Termination (Bending) IEC 60115-1-4.33 JIS-C5201-1-4.33 3 mm deflection Remarks: 0 Ω: 50 mΩ or less Dielectric Withstanding Voltage (Voltage Proof) IEC 60115-1-4.7 JIS-C5201-1-4.7 Applied voltage for 1 minute: 0402 & 0603: 300 V 0805 & 1206: 500 V No abnormalities such as flashover, burning, or dielectric breakdown shall occur. Insulation Resistance IEC 60115-1-4.6 JIS-C5201-1-4.6 Applied voltage for 1 minute: 100 V ≥ 1 GΩ Resistance to Dry Heat IEC 60115-1-4.23.2 JIS-C5201-1-4.23.2 155 ±5 °C for 96 ±4 hours Remarks: 0 Ω: 50 mΩ or less Resistance to Solder Heat IEC 60115-1-4.18 JIS-C5201-1-4.18 270 ±5 °C solder for 10 ±1 seconds Remarks: 0 Ω: 50 mΩ or less Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CR-PF Series Ultra-Low Lead Content Thick Film Resistor Typical Part Marking ±5 % (E24): CR0603-PF , CR0805-PF , CR1206-PF Resistance value is expressed by 3 digits. The first two digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 102 = 10 x 102 = 1000 ohms = 1K ohms Note: “R” represents the decimal point for CR1206-PF . In cases where the marking space is too small to accommodate 4 digits, the marking shall consist of 2 digits followed by an alpha character multiplier. Example: 01A = 100 x 100 = 100 ohms Note: When the resistance value is not in the E96 table, the marking shall consist of 3 digits as in E24 series, with underline. Example: 121 = 0603, 120 ohms, 1 % Jumper: CR0603-PF , CR0805-PF , CR1206-PF Example: 0 = 0 ohms No Marking: CR0402-PF Code R Value Code R Value Code R Value Code R Value Code R Value Code R Value Code R Value Code R Value 01 100 13 133 25 178 37 237 49 316 61 422 73 562 85 750 02 102 14 137 26 182 38 243 50 324 62 432 74 576 86 768 03 105 15 140 27 187 39 249 51 332 63 442 75 590 87 787 04 107 16 143 28 191 40 255 52 340 64 453 76 604 88 806 05 110 17 147 29 196 41 261 53 348 65 464 77 619 89 825 06 113 18 150 30 200 42 267 54 357 66 475 78 634 90 845 07 115 19 154 31 205 43 274 55 365 67 487 79 649 91 866 08 118 20 158 32 210 44 280 56 374 68 499 80 665 92 887 09 121 21 162 33 215 45 287 57 383 69 511 81 681 93 909 10 124 22 165 34 221 46 294 58 392 70 523 82 698 94 931 11 127 23 169 35 226 47 301 59 402 71 536 83 715 95 953 12 130 24 174 36 232 48 309 60 412 72 549 84 732 96 976 This table shows the first two digits for the three-digit E96 part marking scheme. The third character is a letter multiplier: A=100 B=101 C=102 D=103 E=104 F=105 G=10-6 H=10-7 X=10-1 Y=10-2 Z=10-3 102 01A 121

CR-PF Series Ultra-Low Lead Content Thick Film Resistor Packaging Dimensions (Conforms to EIA RS-481A) W D0 DIA. B DIRECTION OF UNREELING F E P0A RESISTOR BOTTOM TAPE TOP TAPE PAPER TAPE Model A B W F E P 1 P2 P0 D0 T CR0402- PF 0.70 ± 0.05 (.028 ± .002) 1.20 ± 0.05 (.047 ± .002) 8.00 ± 0.20 (.315 ± .008) 3.50 ± 0.05 (.138 ± .002) 1.75 ± 0.10 (.069 ± .004) 2.00 ± 0.10 (.079 ± .004) 2.00 ± 0.10 (.079 ± .004) 4.00 ± 0.10 (.158 ± .004) 1.50 ± 0.10 (.006 ± .004) 0.45 ± 0.10 (.018 ± .004) CR0603- PF 1.10 ± 0.10 (.043 ± .004) 1.90 ± 0.10 (.075 ± .004) 4.00 ± 0.10 (.158 ± .004) 2.00 ± 0.05 (.079 ± .002) 0.64 ± 0.10 (.025 ± .004) CR0805- PF 1.60 ± 0.15 (.063 ± .006) 2.40 ± 0.20 PF 2.00 ± 0.15 (.079 ± .006) 3.60 ± 0.20 (.142 ± .008) 9.0 ± 1.0 (.354 ± .039) 60.0 ± 1.0 (2.362 ± .039)DIA. DIA. DIA. 11.5 ± 1.0 (.453 ± .039) 178 ± 2.0 (7.008 ± .079) 13.0 ± 1.0 (.512 ± .039) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. REV. 07/20 DIMENSIONS: MM (INCHES) Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS\¸)V\\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\\[UV[PJL<ZLYZZOV\\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM\[OH[Z\\JOPUMVYTH[PVUPZJ\\YYLU[ and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns ®WYVK\\J[PUH\\ZLYHWWSPJH[PVUTH\]HY\ MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\\L[VP[OLJVTIPUH[PVUVM[OL)V\\YUZ® product with other components PU[OL\\ZLY»ZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\\YUZ® WYVK\\J[HSZVJHUHUKKV]HY\PUKPɈLYLU[HWWSPJH[PVUZHUKHJ[\\HSWLYMVYTHUJLTH\]HY\V]LY[PTL<ZLYZZOV\\SKHS^H\Z]LYPM\ the actual performance of the Bourns ®WYVK\\J[PU[OLPYZWLJPÄJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[ Q\\KNTLU[ZYLNHYKPUN[OLHTV\\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY KPɈLYLUJLZIL[^LLUSHIVYH[VY\HUKYLHS^VYSKJVUKP[PVUZ <USLZZ)V\\YUZOHZL_WSPJP[S\KLZPNUH[LKHUPUKP]PK\\HS)V\\YUZ® product as meeting the requirements of a particular industry Z[HUKHYKLN0:6;: VYHWHY[PJ\\SHYX\\HSPÄJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\\YUZPZUV[YLZWVUZPISLMVYHU\ MHPS\\YLVMHUPUKP]PK\\HS)V\\YUZ®WYVK\\J[[VTLL[[OLYLX\\PYLTLU[ZVMZ\\JOPUK\\Z[Y\Z[HUKHYKVYWHY[PJ\\SHYX\\HSPÄJH[PVU<ZLYZ of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to [OLPYKL]PJLZVYHWWSPJH[PVUZ Bourns®WYVK\\J[ZHYLUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKMVY\\ZLPUU\\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\\Z[HPUPUN HWWSPJH[PVUZUVYPUHU\V[OLYHWWSPJH[PVUZ^OLYLMHPS\\YLVYTHSM\\UJ[PVUTH\YLZ\\S[PUWLYZVUHSPUQ\\Y\KLH[OVYZL]LYLWYVWLY[\ VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZS\HUKZWLJPÄJHSS\HWWYV]LKPU^YP[PUNI\[^VH\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZ on a case-by-case basis, use of any Bourns ®WYVK\\J[ZPUZ\\JO\\UH\\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\\ZPZH[ [OL\\ZLY»ZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\\KLKL]PJLZPKLU[PÄLKI\[OL<:-VVKHUK+Y\\N(KTPUPZ[YH[PVUHZ*SHZZ000 KL]PJLZHUKNLULYHSS\LX\\P]HSLU[JSHZZPÄJH[PVUZV\\[ZPKLVM[OL<UP[LK:[H[LZ )V\\YUZL_WYLZZS\PKLU[PÄLZ[OVZL)V\\YUZ ®Z[HUKHYKWYVK\\J[Z[OH[HYLZ\\P[HISLMVY\\ZLPUH\\[VTV[P]LHWWSPJH[PVUZVUZ\\JO WYVK\\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS\HUKZWLJPÄJHSS\HWWYV]LKPU^YP[PUNI\[^V H\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZVUHJHZLI\JHZLIHZPZ\\ZLVMHU\V[OLY)V\\YUZ®Z[HUKHYKWYVK\\J[ZPUHUH\\[VTV[P]L HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\\ZPZUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKHUKPZH[[OL\\ZLY»ZZVSLYPZR0M)V\\YUZ L_WYLZZS\PKLU[PÄLZHZ\\IJH[LNVY\VMH\\[VTV[P]LHWWSPJH[PVUPU[OLKH[HZOLL[MVYP[ZZ[HUKHYKWYVK\\J[ZZ\\JOHZPUMV[HPUTLU[ VYSPNO[PUNZ\\JOPKLU[PÄJH[PVUTLHUZ[OH[)V\\YUZOHZYL]PL^LKP[ZZ[HUKHYKWYVK\\J[HUKOHZKL[LYTPULK[OH[PMZ\\JO)V\\YUZ Z[HUKHYKWYVK\\J[PZJVUZPKLYLKMVYWV[LU[PHS\\ZLPUH\\[VTV[P]LHWWSPJH[PVUZP[ZOV\\SKVUS\IL\\ZLKPUZ\\JOZ\\IJH[LNVY\VM H\\[VTV[P]LHWWSPJH[PVUZ(U\YLMLYLUJL[V)V\\YUZ ®Z[HUKHYKWYVK\\J[PU[OLKH[HZOLL[HZJVTWSPHU[^P[O[OL(,*8Z[HUKHYK VY¸H\\[VTV[P]LNYHKL¹KVLZUV[I\P[ZLSMTLHU[OH[)V\\YUZOHZHWWYV]LKZ\\JOWYVK\\J[MVY\\ZLPUHUH\\[VTV[P]LHWWSPJH[PVU Bourns®Z[HUKHYKWYVK\\J[ZHYLUV[[LZ[LK[VJVTWS\^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS\ VYHU\V[OLYNLULYHSS\LX\\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\\J[ZKLZPNULKVYTHU\\MHJ[\\YLKMVY \\ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\\YUZL_WYLZZS\PKLU[PÄLZ)V\\YUZ® standard products that are suitable for use in aircraft VYZWHJLHWWSPJH[PVUZVUZ\\JOWYVK\\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS\HUKZWLJPÄJHSS\ HWWYV]LKPU^YP[PUNI\[^VH\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZVUHJHZLI\JHZLIHZPZ\\ZLVMHU\V[OLY)V\\YUZ ® standard WYVK\\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\\ZPZUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKHUKPZH[ the user’s sole risk. ;OL\\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\\YUZ ® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns®J\\Z[VTWYVK\\J[ZHYLZWLJPHSS\KLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\\YUZ HUK[OL\\ZLYYLNHYKPUN[OL\\ZLHUKSL]LSVMZ\\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\\YUZ® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns®WYVK\\J[ZVY[LJOUVSVN\MVY\\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL KLZPNUKL]LSVWTLU[WYVK\\J[PVU\\ZLVYZ[VJRWPSPUNVMU\\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL\\\ZL Bourns®WYVK\\J[ZVY[LJOUVSVN\PUHU\MHJPSP[\^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ HWWS\[VHSS\\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\\KPUNLTIHYNVZVYPU[LYUH[PVUHS YLN\\SH[PVUZ-\\Y[OLY)V\\YUZ® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without WYPVYH\\[OVYPaH[PVUMYVT)V\\YUZHUKVY[OL<:.V]LYUTLU[ILYLZVSK[YHUZMLYYLKVYYLL_WVY[LK[VHU\WHY[\UV[LSPNPISL [VYLJLP]L<:JVTTVKP[PLZZVM[^HYLHUK[LJOUPJHSKH[H ;V[OLTH_PT\\TL_[LU[WLYTP[[LKI\HWWSPJHISLSH^)V\\YUZKPZJSHPTZPHU\HUKHSSSPHIPSP[\MVYZWLJPHSW\\UP[P]LJVUZLX\\LU[PHS PUJPKLU[HSVYPUKPYLJ[KHTHNLZVYSVZ[YL]LU\\LZVYSVZ[WYVÄ[ZHUKPPHU\HUKHSSPTWSPLK^HYYHU[PLZPUJS\\KPUNPTWSPLK^HYYHU[PLZ VMÄ[ULZZMVYWHY[PJ\\SHYW\\YWVZLUVUPUMYPUNLTLU[HUKTLYJOHU[HIPSP[\ )RU\\RXUFRQYHQLHQFHFRSLHVRIWKLV/HJDO'LVFODLPHU1RWLFHZLWK*HUPDQ6SDQLVK-DSDQHVH7UDGLWLRQDO&KLQHVHDQG6LPSOLÀHG&KLQHVH bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf