CR03AM-12 UTC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

UNISONIC TECHNOLOGIES CO., LTD CR03AM-12 Preliminary SCR w w w . u n i s o n i c . c o m . t w 1 of 3 Copyright © 2009 Unisonic Technologies Co., Ltd QW-R301-018.a THYRISTOR „ DESCRIPTION The UTC CR03AM-12 is suitable for low power applications. „ FEATURES * IT (AV) : 0.3 A * VDRM : 600 V * IGT : 100 μA * Non-Insulated Type * Glass Passivation Type „ SYMBOL TO-92 „ ORDERING INFORMATION Pin Assignment Ordering Number Package 1 2 3 Packing CR03AMG-12-T92-B TO-92 G A K Tape Box CR03AMG-12-T92-K TO-92 G A K Bulk Note: Pin assignment: G: Gate K: Cathode A: Anode

UNISONIC TECHNOLOGIES CO., LTD 2 of 3 www.unisonic.com.tw Q W - R 3 0 1 - 0 1 8 . a „ ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT Reverse V RRM 600 V Repetitive Peak Voltage Off-State (Note2) V DRM 600 V Reverse V RSM 800 V Non-Repetitive Peak Voltage Off-State (Note2) V DSM 800 V Reverse V R(DC) 480 V DC Voltage Off-State (Note2) V D(DC) 480 V Forward V FGM 6 V Peak Gate Voltage Reverse V RGM 6 V Peak Gate Forward Current I FGM 0.3 A RMS On-State Current I T (RMS) 0.47 A Surge On-State Current (60Hz sine half wave 1 full cycle, peak value, non-repetitive) ITSM 20 A Average On-State Current (Commercial frequency, sine half wave 180° conduction, Ta = 47°C) IT(AV) 0.3 A I2t for Fusing (Value corresponding to 1 cycle of half wave 60Hz, surge on-state current) I2t 1.6 A 2s Peak Gate Power Dissipation P GM 0.5 W Average Gate Power Dissipation P G(AV) 0.1 W Mass (Typical value) 0.23 g Junction Temperature T J -40~+110 °C Storage Temperature T STG -40~+125 °C 1. Absolute maximum ratings are those values be yond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied Notes: 2. With gate to cathode resistance RGK= 1kΩ „ THERMAL DATA PARAMETER SYMBOL MAX UNIT Junction to Ambient θJA 180 ℃/W „ ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Repetitive Peak Reverse Current I RRM T J= 110°C, VRRM applied 0.1 mA Repetitive Peak Off-State Current I DRM T J= 110°C, VDRM applied, RGK=1kΩ 0.1 mA On-State Voltage (Ta = 25°C) V TM I TM = 4 A, instantaneous value 1.8 V Gate Trigger Voltage V GT T J= 25°C, VD=6 V, IT= 0.1A 0.8 V Gate Non-Trigger Voltage V GD T J= 110°C, VD=1/2 VDRM, RGK=1kΩ 0.2 V Gate Trigger Current I GT T J= 25°C, VD=6 V, IT= 0.1A 1 100 µA Holding Current I H T J= 25°C, VD=12 V, RGK= 1kΩ 1.5 3 mA „ CLASSIFICATION OF IGT If special values of IGT are required, choose item D or E from those listed in the table below if possible. RANK A B C D E RANGE 1 μA ~ 30μA 20 μA ~ 50μA4 0 μA ~ 100μA1 μA ~ 5μA 20 μA ~100 μA The above values do not include the current flowing through the 1kΩ resistance between the gate and cathode.

UNISONIC TECHNOLOGIES CO., LTD 3 of 3 www.unisonic.com.tw Q W - R 3 0 1 - 0 1 8 . a „ IGT, VGT MEASUREMENT CIRCUIT IGS IGT TUT 60Ω RGK 1kΩ DC DC Switch VGT Switch 1: IGT Measurement Switch 2: VGT Measurement UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.