CQB200

Datasheet-CQB200

Document overview

• Manufacturer or author: joyceliang
• PDF pages: 5

Technical content

Features

⚫ Efficiency Up to 92% ⚫ Fixed Switching Frequency ⚫ Regulated Outputs ⚫ Remote On/Off ⚫ Low No Load Power Consumption ⚫ Fully protected (OTP/OCP/OVP/UVLO) ⚫ 2250Vdc I/O Isolation ⚫ Operating Case Temperature -40 to +105℃ ⚫ Quarter Brick Size Meet Industrial Standard 2.28”x1.45”x0.5” ⚫ Meet UL62368-1 2nd (Functional Insulation) ⚫ Meet Shock & Vibration MIL-STD-810F/EN61373 ⚫ Fire & Smoke EN45545-2 Compliant ⚫ 3000m Operating Altitude MODEL NUMBER INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT INPUT CURRENT % EFF. CAPACITOR LOAD MAX. MIN. MAX. NO LOAD FULL LOAD CQB200-24S24 18-36 VDC 24 VDC 0 mA 8.33 A 10 mA 9100 mA 91.5 6600uF CQB200-24S28 18-36 VDC 28 VDC 0 mA 7.14 A 10 mA 9100 mA 92 5400uF NOTE: 1. Nominal Input Voltage 24 VDC 2. An External Input Capacitor 220uF KY 47mΩmax. for All Models are Recommended to Reduce Input Ripple Voltage PART NUMBER Series Nominal Input Voltage Number of Outputs Nominal Output Voltage Remote On/Off Logic Mounting Inserts CQB200- II O XX L -Y (Option) CQB200 24: 24 VDC S: Single 24: 24VDC None: Positive None: M3x0.5 Mounting Inserts 28: 28VDC N: Negative -C: Clear Mounting Insert (3.2mm DIA.) Part Number Example: CQB200-24S24N-C: Quarter Brick, 200W, 2:1 18-36Vdc Input, Single 24Vdc Output, Negative Logic, Clear Mounting Insert

www.cincon.com 2 REVISION: V10 CQB 200 Series TECHNICAL SPECIFICATIONS (All specifications are typical at nominal input, full load at 25°C unless otherwise noted.) ABSOLUTE MAXIMUM RATINGS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Input Voltage Continuous All -0.3 36 V dc Input Surge Voltage 100ms max. All 50 Vdc Operating Case Temperature At the Center Part of Base Plate All -40 105 °C Storage Temperature All -55 125 °C INPUT CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Operating Input Voltage All 18 24 36 Vdc Input Under Voltage Lockout Turn-On Voltage Threshold All 16.5 17 17.5 Vdc Turn-Off Voltage Threshold All 15.5 16 16.5 Vdc Lockout Hysteresis Voltage All 1.0 Vdc Maximum Input Current V in =18V, Full Load. All 14 A No-Load Input Current V in =24V, Io=0A See Model Number Table mA Input Filter Pi filter. All Inrush Current (I 2t) As per ETS300 132-2. All 0.1 A2s Input Reflected Ripple Current P-P thru 12uH inductor, 5Hz to 20MHz. All 60 mA OUTPUT CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Voltage Set Point Accuracy V in =24V, Full Load, T C =25°C All -1.0 +1.0 % Output Voltage Regulation Load Regulation Full Load to No Load All ±0.2 % Line Regulation V in =High Line to Low Line, Full Load All ±0.2 % Temperature Coefficient T C =-40°C to 105°C All ±0.02 %/°C Output Voltage Ripple and Noise (5Hz to 20MHz bandwidth) Peak-to-Peak Full load, 10uF tantalum capacitor and 1uF ceramic capacitors 24Vo 280 mV 28Vo 280 RMS. 24Vo 100 mV 28Vo 100 Output Current Range V in = 18 to 36V See Model Number Table A Over Current Protection Hiccup Mode. Auto Recovery. All 110 130 150 % Short Circuit Protection All Continuous, Auto Recovery. External Load Capacitance Full load (resistive) See Model Number Table uF Output Voltage Trim Range Po ≦max rated power, Io ≦ Io_max All -10 +10 % Output Voltage Remote Sense Range Po ≦max rated power, I o ≦ Io_max % of nominal Vo All +10 % Over Voltage Protection Limited Voltage, % of Nominal Vo All 115 125 140 % EFFICIENCY PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units 100% Load Vin=24V See Model Number Table %

www.cincon.com 3 REVISION: V10 CQB 200 Series DYNAMIC CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Output Voltage Current Transient Error Band 75% to 100% of I o_max step load change di/d t=0.1A/us (within 1% Vout nominal) All ±5 % Recovery Time All 250 us Turn-On Delay and Rise Time Full load (Constant resistive load) Turn-On Delay Time, From On/Off Control Von/off to 10%V o_set, Remote On All 35 ms Turn-On Delay Time, From Input Vin _min to 10%V o_set, Power Up All 30 ms Output Voltage Rise Time 10%V o_set to 90% Vo_set All 15 ms ISOLATION CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Isolation Voltage (100% factory Hi-Pot tested @2sec.) 1 minute; Input to Output, All 2250 V dc 1 minute; Input to Case (Base Plate), All 2250 Vdc 1 minute; Output to Case (Base Plate) All 2250 Vdc Isolation Resistance Input to Output All 100 MΩ Isolation Capacitance Input to Output All 1500 pF Input to Case (Base Plate) All None Output to Case (Base Plate) All None FEATURE CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Switching Frequency Pulse wide modulation (PWM), Fixed All 225 250 275 KHz On/Off Control, Positive Remote On/Off logic, Refer to –Vin pin. Logic Low (Module Off) V on/off at I on/off =1.0mA All 0 1.2 V Logic High (Module On) V on/off at I on/off =0.0uA, Pin open=On All 3.5 75 V On/Off Control, Negative Remote On/Off logic, Refer to –Vin pin Logic High (Module Off) V on/off at I on/off =0.0uA, Pin open=Off All 3.5 75 V Logic Low (Module On) V on/off at I on/off =1.0mA All 0 1.2 V On/Off Current (for both remote on/off logic) Ion/off at V on/off =0V All 0.3 1 mA Leakage Current (for both remote on/off logic) Logic High, V on/off =15V All 30 uA Off Converter Input Current Shutdown input idle current All 5 10 mA Over Temperature Shutdown Temperature at the Center Part of Base Plate, Non-Latching All 110 °C Over Temperature Recovery All 100 °C GENERAL SPECIFICATIONS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units MTBF Io=100% of I o_max ; MIL-HDBK - 217F_Notice 1, GB, 25°C 24S24 730 K hours 24S28 625 Weight All 68 grams Case Material Plastic, DAP, UL 94V-0 Base plate Material Aluminum Potting Material UL 94V-0 Pin Material Base: Copper Plating: Nickel with Matte Tin Shock/Vibration MEET MIL-STD-810F/EN61373 Humidity 95% RH max. Non Condensing

www.cincon.com 4 REVISION: V10 CQB200 Series GENERAL SPECIFICATIONS Altitude 3000m Operating Altitude, 12000m Transport Altitude Thermal Shock MIL-STD-810F Fire & Smoke EN45545-2 Compliant EMI Meets EN55032 Compliant (with external filter) Class A Packaging Information Link Packaging Information EN45545-2 Fire & Smoke Test Conditions. Item Standard Hazard Level R22 Oxygen Index Test EN 45545-2: 2013 EN ISO 4589-2: 2006 HL1, HL2, HL3 Smoke Density Test EN 45545-2: 2013 EN ISO 5659-2: 2013 HL1, HL2 Smoke Toxicity Test EN 45545-2: 2013 NF X70-100: 2006 HL1, HL2, HL3 R23 Oxygen Index Test EN 45545-2: 2013 EN ISO 4589-2: 2006 HL1, HL2, HL3 Smoke Density Test EN 45545-2: 2013 EN ISO 5659-2: 2013 HL1, HL2, HL3 Smoke Toxicity Test EN 45545-2: 2013 NF X70-100: 2006 HL1, HL2, HL3 R24 Oxygen Index Test EN45545-2: 2013 EN ISO 4589-2 HL1, HL2, HL3 R25 Glow - Wire Test EN 45545-2:2013 EN 60695-2-11:2001 HL1, HL2, HL3 R26 Vertical Flame Test EN 45545-2: 2013 EN 60695-11-10: 2013 HL1, HL2, HL3 CHARACTERISTIC CURVE Power Derating Curve 100 110 0 10 20 30 40 50 60 70 80 90 100 110 Output Power (%) Ambient Temperature (℃) CQB200-24S Derating Curve without Heatsink (Vin=24V) Natural 100 ft./min. 200 ft./min. 300 ft./min. 400 ft./min. 100 110 0 10 20 30 40 50 60 70 80 90 100 110 Output Power (%) Ambient Temperature (℃) CQB200-24S Derating Curve with Heatsink QBL127 (Vin=24V) Natural 100 ft./min. 200 ft./min. 300 ft./min. 400 ft./min. 100 110 0 10 20 30 40 50 60 70 80 90 100 110 Output Power (%) Ambient Temperature (℃) CQB200-24S Derating Curve with Heatsink QBT210 (Vin=24V) Natural 100 ft./min. 200 ft./min. 300 ft./min. 400 ft./min.

5 REVISION: V10

6 Trim

+Sense +V Output BOTTOM VIEW M3*0.5 Through 2pl. Function On/Off -V Input -V Output -Sense +V Input Pin Mounting Inserts Millimeters: X.X= ±0.5 , X.XX=±0.25 All Dimensions In Inches(mm) CASE QB Tolerances Inches: X.XX= ±0.02 , X.XXX= ±0.010 0.600[15.24] 1.03[26.2] 1.86[47.2] 0.300[7.62] 0.600[15.24] 2.000[50.8] 2.28 [57.9] 1.45 [36.8] 0.040[1.02] [4.1] 0.50 [12.7] DIA 6PLACES DIA 2PLACES 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) CQB200-24S24 Eff Vs Io @25 Deg. C 18V 24V 36V Power Dissipation (W) Output Power (%) CQB200-24S24 Pd Vs Po @25 Deg. C 18V 24V 36V 80% 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Efficincy (%) Current Load (%) CQB200-24S28 Eff Vs Io @25 Deg. C 18V 24V 36V Power Dissipation (W) Output Power (%) CQB200-24S28 Pd Vs Po @25 Deg. C 18V 24V 36V