CQB100W-110S

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

100 WATT 4:1 INPUT

FEATURES

• 100W Isolated Output * Efficiency up to 92% * Fixed Switching Frequency * 4:1 Input Range * Regulated Outputs * Remote On/Off * Low No Load Power Consumption * Over Temperature Protection * Over Voltage/Current Protection * Continuous Short Circuit Protection * Quarter Brick Size Meet Industrial Standard * UL60950-1 2nd (Basic Insulation) Approval(Except 15Vout) * CB Test Certificate IEC60950-1 (Except 15Vout) * Meets EN50155 with External Circuits * Shock & Vibration Meets EN50155 (EN61373) * Fire & Smoke Meets EN45545-2 * 3000m Operating Altitude MODEL NUMBER INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT INPUT CURRENT % EFF. CAPACITIVE LOAD MAX. MIN. MAX. NO LOAD FULL LOAD CQB100W-110S05 43-160 VDC 5.0 VDC 0 mA 20 A 10 mA 1.00A 91 20000μF CQB100W-110S12 43-160 VDC 12 VDC 0 mA 8.4 A 10 mA 1.00A 92 8400μF CQB100W-110S15 43-160 VDC 15 VDC 0 mA 6.7 A 10 mA 1.00A 91 6700μF CQB100W-110S24 43-160 VDC 24 VDC 0 mA 4.2 A 10 mA 1.03A 89 4200μF CQB100W-110S28 43-160 VDC 28 VDC 0 mA 3.6 A 10 mA 1.04A 88.5 3600μF CQB100W-110S48 43-160 VDC 48 VDC 0 mA 2.1 A 10 mA 1.02A 90 1000μF NOTE: 1. Nominal Input Voltage 110VDC 2. An External Input Capacitor 220uF for All Models are Recommended to Reduce Input Ripple Voltage.

All Specifications Typical At Nominal Line, Full Load, and 25℃ Unless Otherwise Noted INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS: Positive Logic Remote On/Off (note 4&5) Output/Case ……………………………….…… 500VAC min. 3. Output ripple and noise measured with 10uF aluminum and 1uF ceramic capacitor across output for 48Vout and with 10uF tantalum and 1uF ceramic capacitor for others. 5. Suffix "N" to the model number with negative logic remote on/off Module off …………………..…. >3.5Vdc to 160Vdc or open circuit 6. Suffix “-C” to the model number with clear mounting insert (3.2mm DIA.). 7. An external input capacitor 220uF for all models are recommended to reduce input ripple voltage. 8. For information about EN50155 and RIA12, refer to application note. Mounting Inserts M3*0.5 Through 2pl. All Dimensions In Inches(mm) Tolerances Inches: X.XX= ±0.02 , X.XXX= ±0.010 Millimeters: X.X= ±0.5 , X.XX=±0.25 BOTTOM VIEW 0.16[4.1]min 0.50[12.7] PIN PIN CONNECTION Function +V Input On/Off -V Input -V Output +V Output +Sense -Sense Trim 1.86[47.2] 0.21[5.4] 0.300[7.62] 0.600[15.24] 1.030[26.15] 1.45[36.8] 0.14[3.6] 2.000[50.80] 2.28[57.9] 0.600[15.24] 0.300[7.62] 0.150[3.81] REMOTE ON/OFF CONTROL EXTERNAL OUTPUT TRIM