CQ7584-AL

CQ7584-AL_16 COILCRAFT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 1194S-1 Document 1194S-1 Revised 03/01/16 Common mode Cutoff Inductance DCR Length Width Height Part peak impedance frequency (mH) Irms max Isolation max max max number (kOhms) (MHz) nom min (A) (Ohms) (Vrms) (mm) (mm) (mm) Page

• Low profile (<5.0 mm) compact surface mount packages
• Ideal for use to suppress up to 100 MHz common mode noise for general differential signal line filtering
• Provides over 40 dB common mode noise attenuation
• Inductances from 0.47 mH to 4.7 mH
• Up to 0.85 Arms
• 500 Vrms Isolation (hipot)
• Upon request, additional values may be available for particular applications Core material Ferrite Terminations RoHS compliant tin-silver-copper over tin over nickel over phos bronze Weight 0.22 – 0.27 g Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +85°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging CQ7584-AL 250/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.4 mm thick, 12 mm pocket spacing, 4.8 mm pocket depth CJ5100-AL 250/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.4 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth CR7856-AL 250/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.4 mm thick, 12 mm pocket spacing, 4.8 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. SMT Data Line EMI Filters CQ7584-AL CJ5100-AL CR7856-AL

Specifications subject to change without notice. Please check our website for latest information. US UK Taiwan China Singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 1194S-2 Document 1194S-2 Revised 03/01/16 Attenuation (dB) Frequency (MHz) Impedance (kOhm) 0.1 1 10010 Frequency (MHz) 0.1 1 10010 Differential mode Common mode SMT Data Line EMI Filter – CQ7584-AL Common mode Cutoff Part impedance frequency2 Inductance (mH)3 Irms4 DCR max5 Isolation6 number1 max (kOhms) (MHz) nom min (A) (Ohms) (Vrms) 1. When ordering, please specify packaging code: CQ7584-ALC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape Factory order only, not stocked (1000 parts per full reel). 2. Frequency at which the differential mode attenuation equals 3 dB 3. Inductance shown for each winding, measured at 10 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4263B LCR meter or equivalent. 4. Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maxi- mum ratings. 5. DCR is specified per winding. 6. Isolation (hipot) measured for two seconds. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Typical Attenuation Typical Impedance versus Frequency Dimensions are in inches mm Internal code Dot indicates pin 1 0.370 9,4 max 0.189 4,8 max 0.004/ 0,10 0.10 2,54 0.289 7,35 0.112 2,85 0.047 1,2Recommended Land Pattern 0.10 ±0.004 2,54 ±0,10 0.220 5,6 max 0.020 0,50 XXXX Y 7584-AL 0.295 7,5 max

Specifications subject to change without notice. Please check our website for latest information. US UK Taiwan China Singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 1194S-3 Document 1194S-3 Revised 03/01/16 SMT Data Line EMI Filter – CJ5100-AL 1. When ordering, please specify packaging code: CJ5100-ALC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape Factory order only, not stocked (1000 parts per full reel). 2. Frequency at which the differential mode attenuation equals 3 dB 3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4263B LCR meter or equivalent. 4. Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maxi- mum ratings. 5. DCR is specified per winding. 6. Isolation (hipot) measured for two seconds. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Typical Attenuation Typical Impedance versus Frequency Dimensions are in inches mm Attenuation (dB) Frequency (MHz) 0.1 100 Impedance (kOhm) 0.1 1 10010 Frequency (MHz) 0.1 1 10010 Differential mode Common mode 5100-AL 0.098 ±0.004 2,5 ±0,10 0.098 2,5 0.024 ±0.004 0,60 ±0,10 0.370 9,4 0.189 4,8 0.236 6,0max max max 0.280 7,1 max 0.004 / 0,10 Internal code XXXXY Dot indicates pin 1 0.289 7,35 0.112 2,85 0.047 1,2Recommended Land Pattern Common mode Cutoff Part impedance frequency2 Inductance (mH)3 Irms4 DCR max5 Isolation6 number1 max (kOhms) (MHz) nom min (A) (Ohms) (Vrms)

Specifications subject to change without notice. Please check our website for latest information. US UK Taiwan China Singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 1194S-4 Document 1194S-4 Revised 03/01/16 SMT Data Line EMI Filter – CR7856-AL 1. When ordering, please specify packaging code: CR7856-ALC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape Factory order only, not stocked (1000 parts per full reel). 2. Frequency at which the differential mode attenuation equals 3 dB 3. Inductance shown for each winding, measured at 10 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4263B LCR meter or equivalent. 4. Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maxi- mum ratings. 5. DCR is specified per winding. 6. Isolation (hipot) measured for two seconds. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Typical Attenuation Typical Impedance versus Frequency Dimensions are in inches mm Attenuation (dB) Frequency (MHz) 0.1 100 Impedance (kOhm) 0.1 1 10010 Frequency (MHz) 0.1 1 10010 Differential mode Common mode 0.10 ±0.004 2,54 ±0,10 0.370 9,4 0.193 4,9 0.217 5,5max max max 0.295 7,5 max 0.004 / 0,10 Internal code Dot indicates pin 1 0.020 0,50 0.10 2,54 0.289 7,35 0.112 2,85 0.047 1,2Recommended Land Pattern CR78 56-AL XXXXY Common mode Cutoff Part impedance frequency2 Inductance (mH)3 Irms4 DCR max5 Isolation6 number1 max (kOhms) (MHz) nom min (A) (Ohms) (Vrms)