DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Features

  • PICMG

2.11 CompactPCI

  • 16.6 to 160VDC 10:1 wide input range
  • 310W 3U, 8HP CompactPCI package
  • EN 50155 Class S2 and C2 compliant for power stability
  • -40°C to 85°C operating temperature with derating
  • Hot-swap support for N+1 redundant systems Specifications Model Name: cPS-H325/WDC PICMG® Standards PICMG® 2.11 CompactPCI® Power Interface compliant Form Factor: 3U cPCI (100 x 160mm), 2-slot (8HP) wide Input Voltage: 16.6 to 160 VDC Input Frequency: DC General Efficiency: (120W) Typical 85% at 24VDC; (310W) 88% at 48VDC & 89% at 110VDC Switching Frequency: 120KHz at nominal I/P 110VDC Dielectric Withstand: I/P-O/P: 3000VAC; I/P-GND:1500VAC; O/P-GND:1000VA Circuit Topology: Resonant Forward circuit Transient Response: Peak transient < 300mV & recovers within 3mS for 25% load-change Remote ON/OFF: Available at [INH#] & [EN#] pins Input Current F-L/120W: 6A at 24VDC, 1.3A at 110VDC F-L/300W: 7.5A at 48VDC, 3.3A at 110VDC No-Load: 0.35A at 24VDC, 0.45A at 110VDC Inrush Current Peak 27A at nominal 110VDC Input /Output Connector Positronic 47-pin PCIH47M400A1 Output Voltage/Current +5V: Typ. 20A, Max. 33A, peak 35A +3.3V: Typ. 20A, Max. 33A, peak 35A +12V: Typ. 11A, Max. 20A, peak 23A -12V: Typ. 1A, Max. 2A, peak 3A Max. load is the continuous operating load of each rail individually. The max. load of each rail cannot be drawn from all outputs simultaneously. Output Wattage: Typical 120W (fanless) and 300W (forced air) Line Regulation: Typical 0.2% Load Regulation Typical ±1% for V1 & V2 Typical ±2% for V3 Typical ±5% for V4 Output Voltage Sense Available at 5V, 3.3V, and +12V outputs and current sharing N+1 Redundancy: Equipped with internal OR-ing diodes Remote ON/OFF: Available at [INH#] & [EN#] Power Failure Signal Available at [FAL#] pin Protections Over Temperature Protection (OTP): Installed NTC for thermal sensor at [DEG#] pin Over Current Protection (OCP): Installed at each rail Over Load Protection (OLP): Typical 120% max. load, fully protected against output overload or short circuit Over Voltage Protection (OVP): Built-in at all outputs Input-Under & Over-Voltage: Installed Input Reverse Voltage: Installed Conformal Coating: Available Status LEDs Power LED: valid input voltage (green) Fault LED: critical fault (red) Operating Temp. -40°C to +85°C with de-rating Storage Temp. -45˚C to +90˚C Humidity 5% to 95% non-condensing Shock 15g peak-to-peak, 11 ms duration, non-operating Vibration Six degree of freedom random 10Hz 150Hz, 10G Certifications CE, FCC, Class A, EN 61000-4-3, EN 61000-4-5, EN 61000-4-6, EN 55022, IEC

60950 Class I

Ordering Information

  • cPS-H325/WDC PICMG 2.11 47-pin hot-swap redundant 3U CompactPCI 8HP 310W power module with 16.6-160VDC Input *Conformal coating model available by request. www.adlinktech.com Updated Dec. 07, 2018.