CPCI-6540 ELMA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Features
6U CompactPCI 9th Gen Intel Xeon /Core™ Processor Blade with two PMC/XMC sites
- 14nm multi-core 9th Gen Intel processor (formerly Coffee Lake Refresh)
- Dual channel DDR4 ECC memory, soldered and SO-DIMM, up to 64GB
- Versatile storage: SSD, M.2 2242 NVMe
- Dual PMC/XMC sites
- Remote management and TPM support Specifications cPCI-6540 Series Processor & System CPU Intel Xeon E-2276ME processor, 6C/12T, 45/35W by cTDP (12MB cache, up to 4.5GHz) Intel Core™ i7-9850HE processor, 6C/12T, 45/35W by cTDP (9MB cache, up to 4.4GHz) Intel Core™ i7-9850HL processor, 6C/12T, 25W (9MB cache, up to 4.1GHz) Intel Core™ i3-9100HL processor, 4C/4T, 25W (6MB cache, up to 2.9GHz) Intel Celeron G4930E processor, 4C/4T, 35W (2MB cache, 2.4GHz) Chipset Mobile Intel CM246 Chipset Memory Dual channel DDR4-2666 SDRAM, up to 64GB One channel in SO-DIMM socket up to 32GB; one channel soldered onboard up to 32GB (dependent on availability of memory devices and modules) ECC supported by Intel Xeon E-2276ME, Intel Core™ i3-9100HL and Intel Celeron G4930E BIOS AMI UEFI BIOS, SPI Flash memory Support dual BIOS (the system should boot even when one of the dual BIOS is failed) Reserve the option to boot without battery Secure Boot capabilities CompactPCI Bus 1x PCIe x4 Pericom PI7C9X130 PCIe to PCI bridge PCI 64-bit, 66MHz to J1, J2, universal V(I/O) Support host/Satellite mode Standard PICMG 2.0 CompactPCI R3.0 PICMG 2.1 Hot Swap R2.0 PICMG 2.9 System Management (IPMI Rev. 1.5) PICMG 2.16 Packet Switch Backplane R1.0 CompactPCI Serial R LAN DisplayPort USB 3.0 VGA USB 3.0 COM cPCI-6540 cPCI-6540V New
www.adlinktech.com Specifications Connectivity PMC/XMC Up to Two PMC/XMC sites PMC1 or XMC1: 64b/33,66,133M or PCIe x8 Gen2 (space shared with I/Os & onboard drive) PMC2 or XMC2: 64b/33,66,133M or PCIe x8 Gen2 with rear I/O Ethernet Front: 4HP: two GbE ports in front panel by 2x Gigabit Ethernet controller I210IT, A port support NCSI Active LED: Yellow(Blinking); Speed LED: Green(100M)/Orange (1G) Rear: Additional 2x GbE ports by 2x Gigabit Ethernet controller I210IT to J3 for PICMG 2.16 Two additional 10/100/1000BASE-T ports from Intel Ethernet controller on RTM (cPCI-R6100 series) Graphics Integrated in Intel processor with up to DX 11.2 and OGL4.3 One dual mode DP port on front panel, supporting DVI, HDMI, VGA by passive cables. One VGA port One analog VGA (converted from DP) port routed to rear J3. One TMDS port to rear J5 All graphics interfaces are independent channels Supports three independent displays Additional graphics MXM with AMD GPU or NVIDIA supporting two DVI ports on RTM (cPCI-R6500 series) USB 4HP: two USB 3.1 gen2 type A ports on front panel Up to six USB 2.0 to rear J3; one USB 3.0 to rear J5 PS/2 PS/2 keyboard/mouse port to rear J3 Serial Port One serial port supporting RS-232/422/485 on front panel (BIOS) One RS-232 to rear J3; additional TX/RX to rear J3 Audio High Definition Audio signals routed to rear J3 Storage SBC On-board SATAIII 2.5” SATA drive space by DB-LSATA 1x PCIe x 4 M.2 2242 NVMe J3x 2 SATAIII J5x 1 SATAIII RTM Up to three SATA ports CF (x1) and SD (x1) sockets when mating with cPCI-R6100 series *Available interfaces dependent on RTM model selected Operating System OS Windows 10 IOT Enterprise RS5 (64-bit); Windows Server 2016 for cPCI-6540 with Xeon E3 only Ubuntu, SuSe, Redhat Enterprise; Wind River Linux (Yocto) to the new blade, WRLv10_19 LTS (basically the latest) Wind River VxWorks 7.0 upon request (Please contact ADLINK for other OS support) Miscellaneous LED Power, WDT, Hard Disk, Hot Swap and Port 80 user LED Battery Coin cell lithium battery onboard for RTC CMOS RAM TPM Version 2.0 Atmel AT97SC3204 (optional support upon request) Watchdog Timer System Reset and NMI, with programmable interval, 1-65535 seconds or minutes Hardware Monitor Monitors CPU temperature, system temperature, Vcore and DC voltages
www.adlinktech.com Mechanical & Environmental Form Factor 6U 4HP (single slot) CompactPCI 233.33mm x 160mm (LxW) Equipped with J1, J2, J3, J4, J5 connectors Operating Temperature -20°C to +70°C extended temperature -40°C to +85°C extreme extended temperature Storage Temperature -50°C to +100°C RH Humidity 95% non-condensing Shock 20G half-sine shock duration: 11 m Vibration 2 Grms random vibration, 5-500Hz, each axis, operating (measured on i7-9850HL 25W SKU) Weight 500.2g (cPCI-6530 with heatsink assembled) Safety & EMI Certification EMC: EN 55032/35 EMI: CISPR 32, FCC Part 15B Class A EMS: IEC 61000-4-11 IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 1 V IEC 61000-4-8 PFMF
www.adlinktech.com I/O Table GbE USB 2.0 USB
3.0 COM Display VGA PMC/
XMC SATA CF M.2 Mic-in Line- out PS/2 KB/MS SD cPCI-6540 Faceplate 2 2 1 1 DP 1 Onboard 1 1 1 cPCI-6540V Faceplate 2 1 1 DP 1 Onboard 2 1 cPCI-R6002 Faceplate 2 2 1 1 (VGA signal only) Onboard 2 (7-pin) cPCI-R6002D Faceplate 2 4 1 1 (VGA signal only) 1 1 1 Onboard 3 (2x 7-pin+1x 2.5” sapce)(1) cPCI-R6100 Faceplate 4 4 1 (RJ-45) DVI-D 1 1 Onboard 2 (7-pin) 1 1 cPCI-R6110 Faceplate 2 4 1 1 Onboard 3(1) 1 cPCI-R6120 Faceplate 2 4 1 (VGA only) Onboard 2 (2.5” SATA drive onboard) cPCI-R65N0 Faceplate 2 2 1 2 (DVI-I, DVI-D) 1 Onboard 1 (Tx/Rx, 10-pin header) 3 (7-pin) 1 (10-pin) (10-pin) cPCI-R6500 Faceplate 2 1 DVI-I DVI-D Onboard 3(7-pin) (1) Two 7-pin signal connectors onboard for external HDDs and one direct connector for onboard 2.5” SATA drive. SATA direct connector can be replaced with CompactFlash adapter (DB-6920CF)
All products and company names listed are trademarks or trade names of their respective companies. ©2023 ADLINK Technology, Inc. All Rights Reserved. All pricing and specifications are subject to change without further notice. www.adlinktech.com
Ordering Information
cPCI-6540/E-2276ML/M32-32 4HP cPCI-6540 with Intel Xeon™ E-2276ME and 32GB DDR4-2666 ECC soldered memory and 32GB SODIMM with 2x GbE, 2x USB 3.0, 1x RJ-45 COM and single PMC/XMC site cPCI-6540/E-2276ML/M32-0 4HP cPCI-6540 with Intel Xeon™ E-2276ME and 32GB DDR4-2666 ECC soldered memory with 2x GbE, 2x USB 3.0, 1x RJ-45 COM and single PMC/XMC site cPCI-6540/9850HL/M32-32 4HP cPCI-6540 with Intel Core™ i7-9850HL and 32GB DDR4-2666 soldered memory and 32GB SODIMM with 2x GbE, 2x USB 3.0, 1x RJ-45 COM and single PMC/XMC site cPCI-6540/9100HL/M16-0 4HP cPCI-6540 with Intel Core™ i3-9100HL and 16GB DDR4-2666 ECC soldered memory with 2x GbE, 2x USB 3.0, 1x RJ-45 COM and single PMC/XMC site Contact us for different CPU, memory options. Rear Transition Modules cPCI-R6002 4HP Rear I/O module with GbE x2, COM x2, USB x3, SATA x2, DVI-I cPCI-R6002D 8HP Rear I/O module with 2x GbE, 2x COM, 5x USB, 2x SATA, VGA, PS/2 KB/MS cPCI-R6100 4HP Rear I/O module with GbE x4, COM, USB x4, SATA x2, DVI, VGA, PS/2, CF, SD socket cPCI-R6110 4HP Rear I/O module with GbE x2, COM, USB x4, SATA x3, DVI, VGA, PS/2, CF, SD socket cPCI-R6120 8HP Rear I/O module with 2x GbE, 4x USB, 2x SATA, VGA, PS/2 KB/MS, CF, SD w/space for dual SATA drives cPCI-R6500/RTX3000 6U 8HP Rear I/O module with NVIDIA RTX3000 MXM 3.0 graphics module Type A with DVI-I x1, DVI-D x1, GbE x2, USB x2, COM x1, PS/2 x1, SATA x3 cPCI-R6500/A8860 4HP Rear I/O module with AMD E8860MF MXM 3.0 graphics module with DVI-I x1, DVI-D x1, GbE x2, USB x1 See 6U RTM selection guide for more options. cPCI-R6120 KB/MS USB x4 GbE x2 VGA cPCI-R6500cPCI-R6002 DVI-I COM USB GbE cPCI-R6100 cPCI-R6110cPCI-R6002D DVI-D COM GbE GbE SD VGA USB x4 PS/2 KB/MS DVI-I COM USB GbE Mic-in USB x2 Line-out PS/2 KB/MS GbE USB x4 VGA PS/2 KB/MS SD DVI-I, DVI-D GbE x2 USB