CP802 MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Single Phase Bridge Rectifiers CP80 Series Page <1> 13/06/12 V1.1 www.element14.com www.farnell.com www.newark.com Features:
- • High surge current capability
- • PCB mounted / screw fixing
- • Surge overload rating: 200 A peak
- • Low forward voltage drop and reverse leakage
- • Small size, simple installation
- • Reliable low cost construction utilizing moulded plastic technique Mechanical Data: Mounting Position : Any Terminals : Leads solderable per MIL-STD- 202, Method 208 Mounting : Through hole for a number 6 screw Dimensions : Inches (Millimetres) Maximum Ratings and Electrical Characteristics At 25°C ambient temperature unless otherwise noted; resistive or inductive load at 60 Hz Parameter CP802 CP806 Unit Maximum Recurrent Peak Reverse Voltage 200 600 V Maximum Bridge Input Voltage RMS 140 420 Maximum Average Rectified Output at T C = 50°C See Figure 2 T A = 40°C 3 A Peak One Cycle Surge Overload Current 200 Maximum Forward Voltage Drop Per Element at 4 A dc and 25°C See Figure 3 1.1 V Maximum Reverse Leakage at Rated DC Blocking Voltage Per Element at 25°C See Figure 4 at 100°C µA mA I2t Rating for Fusing ( t<8.3 ms) 166 A2s Typical Junction Capacitance Per Leg (Note 4) CJ 200 pF Typical Thermal Resistance Per Leg (Note 3) RθJA Typical Thermal Resistance Per Leg (Note 2) RθJL 6 °C / W Operating Temperature Range -55 to +125 Storage Temperature Range -55 to +150 Notes : 1. Bolt down on to a heat-sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer with a number 6 screw 2. Units mounted on a 8.6 × 8.6 × 24 inches thick (22 × 22 × 0.6 cm) aluminium plate heatsink 4. Measured at 1 MHz and applied reverse voltage