DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Coilcraft, Inc. 2012
1102 Silver Lake Road
Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information. 1. When ordering, please specify termination and testing codes: CP336FRA902MAZ Termination: A = RoHS compliant gold over nickel over silver- palladium-glass frit Special order: C = Tin-lead over gold over nickel over silver-palladium- glass frit F = Tin-silver-copper over gold over nickel over silver- palladium-glass frit Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 2. Inductance measured at 100 MHz using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. 3. DCR is specified per winding. 4. Current per winding that causes a 20°C rise from 25°C ambient. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
- Eliminates virtually all common mode noise in high-speed, differential mode signal transmission applications such as USB 2.0, IEEE1394, HDMI and LVDS.
- Most provide >25 dB common mode attenuation and >100 ohms impedance. Common mode Common mode impedance typ (Ohms) attenuation typ (dB) Inductance2 DCR max3 Isolation Irms4 Part number1 10 MHz 100 MHz 500 MHz 10 MHz 100 MHz 500 MHz min (nH) (Ohms) (Vrms) (mA) CP336FRA421MAZ 14 42 70 1.1 2.3 8.4 23 0.12 250 500 CP336FRA901MAZ 28 90 154 1.4 4.2 16.9 47 0.17 250 500 CP336FRA172MAZ 57 170 303 2.3 6.7 22.0 84 0.25 250 500 CP336FRA262MAZ 85 260 435 3.0 8.6 27.8 147 0.26 250 500 CP336FRA372MAZ 118 370 641 4.5 11.9 34.3 189 0.32 250 500 CP336FRA502MAZ 148 500 945 4.9 14.5 31.3 273 0.37 250 500 CP336FRA672MAZ 246 670 1231 8.4 16.6 30.0 322 0.45 250 500 CP336FRA902MAZ 294 900 1715 8.7 18.7 30.5 413 0.65 250 250 Common Mode Chokes for Critical Applications
0805 COMMON MODE CHOKES
Terminations Gold over nickel over silver-palladium-glass frit. Other terminations available at additional cost Weight 14.9 – 15.2 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +105°C with derated current Storage temperature Component: –55°C to +105°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Packaging 2000 per 7″reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth Document CP306-1 Revised 09/07/12 0.065 1,65 max max0.068 1,73 0.018 0,46 0.030 0,76 0.040 1,02 0.036 0,91 0.020 0,51 0.020 0,51 0.014 0,36 0.004 0,10 Recommended Land Pattern max0.090 2,29 Dimensions are in inches mm
© Coilcraft, Inc. 2012 Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email cps@coilcraft.com www.coilcraft-cps.com This product may not be used in medicalor high risk applicationswithoutprior Coilcraftapproval. Specificationssubjectto change withoutnotice. Please check our web site for latest information.
0805 Common Mode Choke — CP336FRA
Typical Attenuation (Ref: 50 Ohms) Typical Impedance vs Frequency Atten uation (dB -902 -672 -262 -901 -421 -172 -502 -372 11 0 100 1000 Frequency (MHz) Common mode Differential mode (typical for all parts) 1000 10000 100 11 0 1000 Impedance (Ohms) Frequency (MHz) 100 -902 -672 -172 -901 -421 -262 -372 -502 Document CP306-2 Revised 09/07/12