CP1-12 NAIS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
ULTRA-MINIATURE, LOW PROFILE AUTOMOTIVE RELAY mm inch *Surface mount terminal type is coming soon. 9.5 .374 .512 .551 9.5 .374 .512 .551
FEATURES
- Low profile <Height> PC board terminal type: 9.5 mm .374 inch Surface-mount terminal type: 10.5mm .413inch
- High capacity CP Relay provides low profile spacesav- ing advantages while offering high contin- uous current of 25 A(1 hour).
- Sealed construction suitable for harsh environments
- Simple footprint pattern enables ease of PC board layout
- "PC board terminal" and "Surface mount terminal" types available Contact terminals Coil terminals SPECIFICATIONS Contact Coil Characteristics Arrangement 1 Form A 1 Form C Contact material Silver alloy Initial contact resistance, max. (By voltage drop 6V DC 1A) 100 m W Rating Nominal switching capacity 20 A 14 V DC
20 A 14 V DC
(N.O.)
10 A 14 V DC
(N.C.) Max. switching voltage 16 V DC Max. carrying current
40 A for 2 minutes
30 A for 1 hour
(12 V at 20 C 68
35 A for 2 minutes
25 A for 1 hour
(12 V at 85 C 185 Expected life (min. operations) Mechanical (at 120cpm) 10 Electrical (at 6cpm) Resistive load Min. 10 Motor load Min. 2 Min. 10 Lamp load Min. 10 Nominal operating power 640 mW Max. operating speed (at rated load) 6cpm Initial insulation resistance* Min. 100M W (at 500 V DC) Initial breakdown voltage* Between open contacts 500 Vrms for 1min. Between contact and coil 500 Vrms for 1min. Operate time* Max. 10ms (at 20 C 68 Release time (without diode)* (at nominal voltage) Max. 10ms (at 20 C 68 Shock resistance Functional* Min. 100 m/s {10 G} Destructive* Min. 1,000 m/s {100 G} Vibration resistance Functional* 10 to 100 Hz, Min.44.1 m/s {4.5 G} Destructive 10 to 500 Hz, Min.44.1 m/s {4.5 G} Conditions in case of operation, transport and storage* (Not freezing and condensing at low temperature) Ambient temp –40 to +85 C –40 to +185 F Humidity 5 to 85% R.H. Unit weight Approx. 4g .14 oz Remarks * Specifications will vary with foreigh standards certification ratings. At nominal switching capacity, operating frequency: 1s ON, 9s OFF N.O.: at 5A (steady), 25A (inrush)/N.C.: at 20A (brake) 14V DC, operating frequency: 0.5s ON, 9.5s OFF At 20A 14V DC (Motor lock), operating frequency: 0.5s ON, 9.5s OFF N.O.: at 5A (steady), 40A (inrush)14V DC, operating frequency: 1s ON, 14s OFF Measurement at same location as "Intial breakdown voltage" section Detection current: 10mA Excluding contact bounce time Half-wave pulse of sine wave: 11ms; detection time: 10 m s Half-wave pulse of sine wave: 6ms Detection time: 10 m s Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61) TYPICAL
APPLICATIONS
- Power windows
- Auto door lock
- Power sunroof
- Hazard flasher
- Flasher
- Defogger
- Power steering
- Power seat
ORDERING INFORMATION
Ex. CP Contact arrangement 1a:
1 Form A
1 Form C
Nil: Tube packing Tape and reel packing (picked from the NC terminal side) Tape and reel packing (picked from the coil terminal side) 12 V Packing styleCoil voltage (DC) 1a 12V Nil: SA: PC board terminal Surface-mount terminal* Mounting classification SA X Notes: 1. Standard packing: Carton (Tube): 40 pcs.; Case: 1,000 pcs. 2. Tape and reel packing: Carton (Tape and reel): 300 pcs.; Case: 900 pcs. 3. Surface-mount terminal type are available only for tape and reel packing. 4. 24 V DC type is also available. Please consult us for details. *Only for 1 Form C type
- PC board terminal type 2. Surface mount terminal type Notes: 1. Tape and reel (picked from N.C. terminal side) is also available by request. Part No. suffix "-x" is needed when ordering. (ex) CP1SA-12V-X 2. Tape and reel packing symbol "-z" or "-x" are not marked on the relay. 3. 24 V DC type is also available. Please consult us for details. Contact arrangement Coil voltage Part No.
1 Form A 12 V DC CP1a-12V
1 Form C 12 V DC CP1-12V
Contact arrangement Coil voltage Part No.
1 Form C 12 V DC CP1SA-12V-Z
(at 20 C 68 DIMENSIONS 1. PC board terminal type Nominal voltage, V DC Pick-up voltage, V DC (max.) Drop-out voltage, V DC (min.) Coil resistance W 10%) Nominal operating current mA ( 10%) Nominal operating power mW Usable voltage range, V DC 12 (initial) 7.2 (initial) 1.0 225 53.3 640 10 to 16 Max. 1.0 .039 1.0 .039 3.5 .138 0.4 .016 0.4 .016 0.4 .016 1.5 .059 0.3 .012 1.7 .067 2.0 .079 1.5 .059 5.0 .197 6.0 .236 Pre-soldering 14.0 .551 13.0 .512 5.4 .213 9.5 .374 6.0 .236 10.7 .421 * Dimensions (thickness and width) of terminal specified in this catalog is measured before pre-soldering. Intervals between terminals is measured at A surface level. mm inch 2. Surface mount terminal type Pre-soldering 1.7 .067 1.4 .055 1.4 .055 1.5 .059 1.5 .059 1.5 .059 .039 .079 13.0 .512 0.3 .012 0.4 .016 0.4 .016 0.4 .016 14.0 .551 9.1 .358 10.5 .413 .197 5.4 .213 1.5 .059 6.0 .236 6.0 .236 10.7 .421 Dimension: General tolerance Max. 1mm .039 inch: 0.1 .004 1 to 3mm .039 to .118 inch: 0.2 .008 Min. 3mm .118 inch: 0.3 .012 Recommendable mounting pad (Top view) 6.0 .236 2.0 .0792.0 .079 2.5 .098 2.5 .098 4.8 .189 4.0 .157 4.7 .185 4.8 .189 4.8 .189 4.4 .173 3.8 .150 4.2 .165 Schematic (Bottom view) COM COIL NO NC NO COIL COM PC board pattern (Bottom view) 2-1.3+0.1 dia. 2-.051+.004 dia. 4.5 .177 .079 (R) 10.7 .421 2-0.9+0.1 2-.035+.004 2-2.0+0.1 2-.079+.004 .236 5.4 .213 2-1.3+0.1 dia. 2-.051+.004 dia. 4.5 .177 .079 (R) 10.7 .421 2-0.9+0.1 2-.035+.004 2-2.0+0.1 2-.079+.004 .236 .197 Dimension: General tolerance Max. 1mm .039 inch: 0.1 .004 1 to 3mm .039 to .118 inch: 0.2 .008 Min. 3mm .118 inch: 0.3 .012
- Coil temperature rise Tested sample : CP1-12V, 6pcs Point measured : Inside the coil Contact carrying current, 5A, 10A, 15A, 20A Resistance method, ambient temperature 85 C 185 F 2-(1). Electrical life test (at rated load) Tested Sample : CP1-12V Quantity : n = 4 (NC = 2, NO = 2) Load : Resisitive load (NC side : 10A 14 V DC, NO side : 20 A 14 V DC) Operating frequency : ON 1s, OFF 9s Contact welding : 0 time Miscontact : 0 time 12 14 16 100 20A 15A 10A Coil applied voltage, V Temperature rise, °C 05 1 0 Pick-up voltage Drop-out voltage X X Max. Max. Min. Min. Pick-up and drop-out voltage, V No. of operations, · 10 Contact welding: 0 times Miscontact: 0 times 2-(2). Electrical life test (Motor free) Tested Sample : CP1-12V, 3pcs. Load : 5A, Inrush 25A, Brake current 15A, Power window motor load (Free condition). Operating frequency : ON 0.5s, OFF 9.5s Circuit : Contact welding : 0 time Miscontact : 0 timeSample M 01 0 2 0 Pick-up voltage Drop-out voltage X X Max. Max. Min. Min. Pick-up and drop-out voltage, V No. of operations, · 10 Contact welding: 0 times Miscontact: 0 times 2-(3). Electrical life test (Lamp load) Tested sample : CP1-12V, 3pcs. Load : 5A, Inrush 40A, 14VDC lamp load Operating frequency : ON 1s, OFF 14s Circuit : Contact welding : 0 time Miscontact : 0 timeSample Lamp 05 1 0 Pick-up voltage Drop-out voltage X X Max. Max. Min. Min. Pick-up and drop-out voltage, V No. of operations, · 10 Contact welding: 0 times Miscontact: 0 times For Cautions for use, see Relay Technical Information (Page 48 to 76). 5/27/2002 All Rights Reserved, © Copyright Matsushita Electric W orks, Ltd. Go To Online Catalog