CP1006 MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Single Phase Bridge Rectifiers CP 10 A Series Page <1> 19/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Features:

  • • High surge current capability
  • • PCB mounted / screw fixing
  • • Surge overload rating-200 amperes peak
  • • Low forward voltage drop and reverse leakage
  • • Small size, simple installation
  • • Reliable low cost construction utilizing moulded plastic technique Mechanical Data Case : Moulded plastic with heatsink integrally mounted in the bridge encapsulation Terminals : Lead solderable per MIL-STD-202 method 208 Dimensions : Inches (Millimetres) Maximum Ratings and Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise noted; resistive or inductive load at 60 Hz Parameter CP1000 CP1001 CP1004 CP1006 CP1008 Units Maximum Recurrent Peak Reverse Voltage 50 100 400 600 800 V Maximum Bridge Input Voltage RMS 35 70 280 420 560 Maximum Average Rectified Output at TA = 50°C* See Figure 2 10 A Peak One Cycle Surge Overload Current 200 Maximum Forward Voltage Drop Per Element at 5 A dc and 25°C See Figure 3 1.1 V Maximum Reverse Leakage at Rated DC Blocking Voltage Per Element at 25°C See Figure 4 at 100°C µA mA Typical Junction Capacitance Per leg (Note 4) CJ 200 pF I2t Rating for Fusing (t <8.3 ms) 164 A2S

Single Phase Bridge Rectifiers CP 10 A Series Page <1> 19/05/12 V1.1 www.element14.com www.farnell.com www.newark.com Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. Specification Table Io (A) at TA = 50°C IFSM (A) Body Lead Current Rating (A) Part Number Height Width / Depth Length Spacing Diameter (Typical) 10 200 7.6 19.1 19 12.7 1.3 10 CP1000 CP1001 CP1004 CP1006 CP1008 Dimensions : Millimetres