CNY651 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

www.vishay.com Vishay Semiconductors Rev. 1.0, 12-Feb-14 1 Document Number: 82566 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Optocoupler, Phototransistor Output, Very High Isolation Voltage

DESCRIPTION

The CNY651 Series are high isolation voltage TH and SMD version optocouplers consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4 pin plastic package. The single components are mounted opposite one another, providing a distance between input and output for highest safety requirements of > 3 mm. VDE STANDARDS These couplers perform safety functions according to the following equipment standards:

  • DIN EN 60747-5-5 (VDE 0884-5) Optocoupler for electrical safety requirements

FEATURES

  • Rated recurring peak voltage (repetitive) VIORM = 1450 Vpeak
  • Thickness through insulation ≥ 3 mm
  • Creepage current resistance according to VDE 0303/IEC 60112 comparative tracking index: CTI ≥ 475
  • Moisture sensitivity level MSL4 - Follow defined storage and soldering requirements for CNY651ST devices
  • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

  • Solar and wind power diagnostic, monitoring, and communication equipment
  • Welding equipment
  • High voltage motors
  • Switch-mode power supplies
  • Line receiver
  • Computer peripheral interface
  • Microprocessor system interface
  • Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): - for appl. class I to IV at mains voltage ≤ 300 V - for appl. class I to IV at mains voltage ≤ 600 V - for appl. class I to III at mains voltage ≤ 1000 V according to DIN EN 60747-5-5 (VDE 0884-5) AGENCY APPROVALS Safety application model numbe r covering all products in this datasheet is CNY651. Th is model number should be used when consulting safety agency documents.
  • DIN EN 60747-5-5 (VDE 0884-5)
  • UL1577, file no. E76222
  • VDE related features: - rated impulse voltage (transient overvoltage), V IOTM = 12 kVpeak - isolation test voltage (parti al discharge test voltage), Vpd = 2.8 kVpeak C E A C Top View 17187-5 VDE CNY651ST CNY651

ORDERING INFORMATION

AGENCY CERTIFIED/PACKAGE CTR (%) 5 mA UL, VDE 50 to 150 100 to 300 DIP-4 HV, 600 mil high isolation distance - CNY651AGR SMD-4 HV, 600 mil high isolation distance CNY651AYST CNY651AGRST 15.24 mm CNY651ST 15.24 mm CNY651

www.vishay.com Vishay Semiconductors Rev. 1.0, 12-Feb-14 2 Document Number: 82566 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Stresses in excess of the absolu te maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those give n in the operational sections of this document. Exposure to abs olute maximum ratings for extended periods of the time can adversely affect reliability. Fig. 1 - Total Power Dissipation vs. Ambient Temperature ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V R 5V Forward current I F 75 mA Forward surge current t p ≤ 10 μs I FSM 1.5 A Power dissipation P diss 120 mW Junction temperature T j 125 °C OUTPUT Collector emitter voltage V CEO 32 V Emitter collector voltage V ECO 7V Collector current I C 50 mA Collector peak current t p/T = 0.5, tp ≤ 10 ms I CM 100 mA Power dissipation P diss 130 mW Junction temperature T j 125 °C COUPLER DC isolation test voltage CNY651A...ST t = 1 s V ISO 13.9 kV Total power dissipation P tot 250 mW Ambient temperature range T amb -40 to +110 °C Storage temperature range T stg -40 to +110 °C Soldering temperature 2 mm from case, ≤ 10 s T sld 260 °C 100 150 200 250 300 0 40 80 120 Ptot - Total Power Dissipation (mW) Tamb - Ambient Temperature (°C) Coupled device Phototransistor IR-diode

www.vishay.com Vishay Semiconductors Rev. 1.0, 12-Feb-14 3 Document Number: 82566 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of en gineering evaluation. Typical values are for information only and are not part of the testing requirements. Note
  • According to DIN EN 60747-5-5 (see figure 2). This optocoupler is suitable for safe electric al isolation only within the safet y ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I F = 50 mA V F 1.32 1.6 V Junction capacitance V R = 0 V, f = 1 MHz C j 50 pF OUTPUT Collector emitter voltage I C = 1 mA V CEO 32 V Emitter collector voltage I E = 100 μA V ECO 7V Collector emitter leakage current V CE = 20 V, IF = 0 mA I CEO 200 nA COUPLER Collector emitter saturation voltage I F = 10 mA, IC = 1 mA V CEsat 0.3 V Cut-off frequency V CE = 5 V, IF = 10 mA, RL = 100 Ω fc 110 kHz Coupling capacitance f = 1 MHz C k 0.3 pF CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION BIN SYMBOL MIN. TYP. MAX. UNIT IC/IF VCE = 5 V, IF = 5 mA AY. CTR 50 150 % AGR. CTR 100 300 % SAFETY AND INSULATION RATINGS PARAMETER SYMBOL VALUE UNIT MAXIMUM SAFETY RATINGS Output safety power PSO 250 mW Input safety current Isi 120 mW Safety temperature TS 150 °C Comparative tracking index CTI 475 INSULATION RATED PARAMETERS Maximum withstanding isolation voltage VISO 8200 VRMS Maximum transient isolation voltage VIOTM 12 000 Vpeak Maximum repetitive peak isolation voltage VIORM 1450 Vpeak Insulation resistance Tamb = 25 °C, VDC = 500 V RIO ≥ 1012 Ω Isolation resistance Tamb = 100 °C, VDC = 500 V RIO ≥ 1011 Ω Climatic classification (according to IEC 68 part 1) 40/110/21 Environment (pollution degree in accordance to DIN VDE 0109) 2 Creepage ≥ 14 mm Insulation thickness DTI 3 mm

www.vishay.com Vishay Semiconductors Rev. 1.0, 12-Feb-14 4 Document Number: 82566 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 2 - Safety Derating Diagram Fig. 3 - Test Pu lse Diagram for Sample Test According to DIN EN 60747-5-5 (VDE 0884-5); IEC60747-5-5 Fig. 4 - Test Circuit, Non-Saturated Operation Fig. 5 - Test Circuit, Saturated Operation Fig. 6 - Switching Times 100 125 150 175 200 225 250 0 25 50 75 100 125 150 175 200 Tamb (°C)22292 Pso (mW) Isi (mA) t 13930 t1, t2 = 1 s to 10 s t3, t4 = 1 s ttest = 10 s tstres = 12 s VIOTM Vpd VIOWM VIORM ttest tTr = 60 s tstres t3 t4 SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Delay time V S = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) t d 2.6 μs Rise time V S = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) t r 2.4 μs Fall time V S = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) t f 2.7 μs Storage time V S = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) t s 0.3 μs Turn-on time V S = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) t on 5μ s Turn-off time V S = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) t off 3μ s Turn-on time V S = 5 V, IF = 10 mA, RL = 1 kΩ, (see figure 4) t on 25 μs Turn-off time V S = 5 V, IF = 10 mA, RL = 1 kΩ, (see figure 4) t off 42.5 μs Channel I Channel II 95 10900 RG = 50 tp tp = 50 µs T = 0.01 + 5 V IC = 5 mA; adjusted through input amplitude IF IF 50 100 Oscilloscope R L 1 M CL 20 pF Channel I Channel II 95 10843 RG = 50 Ω tp tp = 50 µs T = 0.01 + 5 V IC IF 50 Ω 1 kΩ IF = 10 mA Oscilloscope RL ≥ CL 20 pF 1 MΩ t p t t 10 % 90 % 100 % tr td ton ts tf toff IF IC tp Pulse duration td Delay time tr Rise time ton (= td + tr) Turn-on time ts Storage time t f Fall time toff (= ts + tf) Turn-off time 96 11698

www.vishay.com Vishay Semiconductors Rev. 1.0, 12-Feb-14 5 Document Number: 82566 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Fig. 7 - Forward Current vs. Forward Voltage Fig. 8 - Collector Current vs. Collector Emitter Voltage (NS) Fig. 9 - Collector Current vs. Collector Emitter Voltage Fig. 10 - Leakage Current vs. Ambient Temperature Fig. 11 - Normalized CTR (sat.) vs. Ambient Temperature Fig. 12 - Normalized CTR (NS) vs. Ambient Temperature 0.1 100 IF - Forward Current (mA) VF - Forward Voltage (V) Tamb = 110 °C Tamb = 25 °C Tamb = 0 °C Tamb = -40 °C IC - Collector Current (mA) VCE - Collector Emitter Voltage (V) 02468 1 0 1 2 IF = 30 mA IF = 20 mA IF = 15 mA IF = 10 mA IF = 5 mA IC - Collector Current (mA) VCE - Collector Emitter Voltage (V) IF = 25 mA IF = 10 mA IF = 5 mA IF = 2 mAIF = 1 mA ICEO - Leakage Current (nA) Tamb - Ambient Temperature (°C) 0.001 0.1 100 10 000 -55 -35 -15 5 25 45 65 125 IF = 0 A VCE = 12 V VCE = 24 V VCE = 40 V 85 105 0.01 1000 NCTR - Normalized CTR (sat.) Tamb - Ambient Temperature (°C) 0.2 0.4 0.6 0.8 1.0 1.2 -55 -35 -15 5 25 45 105 125 Normalized to: V CE = 0.4 V, IF = 5 mA, Tamb = 25 °C 8565 NCTR - Normalized CTR (NS) Tamb - Ambient Temperature (°C) 0.2 0.4 0.6 0.8 1.0 1.2 -55 -35 -15 5 25 45 105 125 8565 Normalized to: V CE = 5 V, IF = 5 mA, Tamb = 25 °C

www.vishay.com Vishay Semiconductors Rev. 1.0, 12-Feb-14 6 Document Number: 82566 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 13 - Normalized CTR (NS) vs. Forward Current Fig. 14 - Normalized CTR (sat.) vs. Forward Current Fig. 15 - FCTR vs. Collector Current Fig. 16 - Phase Angle vs. FCTR Fig. 17 - Switching Time vs. Load Resistance 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1 10 100 NCTR - Normalized CTR (NS) IF - Forward Current (mA) Tamb = 0 °C Tamb = 110 °C Tamb = - 40 °C Tamb = 25 °C Normalized to: V CE = 5 V, IF = 5 mA, Tamb = 25 °C 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1 10 100 NCTR - Normalized CTR (sat) IF - Forward Current (mA) Tamb = 0 °C Tamb = 110 °C Tamb = - 40 °C Tamb = 25 °C Normalized to: V CE = 5 V, IF = 5 mA, Tamb = 25 °C

22515 FCTR (kHz)

IC - Collector Current (mA) 100 1000 0.1 1 10 100 VCE = 5 V

22516 Phase (deg)

Frequency (kHz) -180 -160 -140 -120 -100 -80 -60 -40 -20 1 10 100 1000 VCE = 5 V 22517 ton, toff - Switching Time (μs) RL - Load Resistance (kΩ) 0.1 100 1000 0.1 1 10 100 ton toff VCE = 5 V, IF = 10 mA

www.vishay.com Vishay Semiconductors Rev. 1.0, 12-Feb-14 7 Document Number: 82566 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SOLDERING GUIDLINES Soldering Condition The CNY651AxST are lead (Pb)-free devices. They are suitable for reflow soldering. However due to large package size, the peak package body temperature should not go above 245 °C. Drypack These devices have a moisture sensitivity level MSL4 thus they are packed in moisture barrier bags (MBB) to prevent moisture absorption during transportation and storage. Each bag contains a desiccant bag. Floor Life Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: Floor life: 72 h Conditions: T amb < 30 °C, RH < 60 % Moisture sensitivity level 4, according to J-STD-020. Drying In case of moisture absorpt ion devices should be baked before soldering according to the recommended conditions shown below 48 h at 125 °C ± 5 °C, RH < 5% (Not suitable for tape and reel) In case the floor time has not exceeded 10 days the units can be baked in tape and reel according to the following conditions 168 h at 60 °C ± 5 °C, RH < 5 % (Not suitable, if the floor time was exceeded by more than 10 days, or the allowed factory condition is exceeded) CNY651 - DIP version device cannot go through reflow soldering hence wave solder ing should be used. See absolute maximum ratings for soldering specifications. PACKAGE DIMENSIONS in millimeters FOR CNY651A...ST 100 150 200 250 300 0 50 100 150 200 250 300 Time (s) Temperature (°C) 240 °C 245 °C max. 120 s max. 100 s 217 °C max. 20 s max. ramp up 3 °C/s max. ramp down 6 °C/s max. 2 cycles allowed 22550 17.8 ± 0.2 specifications according to DIN technical drawings 19.4 ± 0.3 Leads coplanarity 0.1 max. Recommended footprint 20.9 7.62 2.9 Z 10:1 0.4 ± 0.1 Cathode Emitter Anode Collector 7.15 ± 0.4 6.1 ± 0.2 2.1 ± 0.5 7.62 ± 0.4 9.6 ± 0.2 0.5 ± 0.2 Z

www.vishay.com Vishay Semiconductors Rev. 1.0, 12-Feb-14 8 Document Number: 82566 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE DIMENSIONS in millimeters FOR CNY651A... PACKAGE MARKING (Example of CNY651AYST) Note

  • The “T” at the end of the product designation is not marked on the package TUBE AND TAPE INFORMATION Fig. 18 - CNY651 TAPE DIMENSIONS in millimeters FOR CNY651A...ST TUBE INFORMATION TYPE UNITS/TUBE TUBES/BOX UNITS/BOX CNY651 30 35 1050 technical drawings according to DIN specifications Cathode Anode Collector Emitter 9.6 ± 0.1 7.62 ± 0.2 6.1 ± 0.1 9.1 ± 0.3 15.24 ± 0.2 17.8 ± 0.1 CNY651AYS V YWWJ 69 15914 Leader (start) min. 400 mm without devices Trailer (end) min. 200 mm without devices 0.4 ± 0.05 5.65 25.5 Direction of feed 9.9 Ø 1.55 ± 0.05 2 ± 0.15 4 ± 0.1 Ø 2 min.16 ± 0.1 32 ± 0.3 14.2 ± 0.10 18.1 1.75 ± 0.1 Top cover tape

www.vishay.com Vishay Semiconductors Rev. 1.0, 12-Feb-14 9 Document Number: 82566 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 REEL DIMENSIONS in millimeters Fig. 19 - 400 Units per Reel, 2 Reels per Box Leader and trailer tape: Parts mounted Empty trailer 200 mm min. Empty leader 400 mm min. Direction of pulling out Unreel direction Ø 60 min. Ø Y 2 ± 0.5 Label posted here Tape position coming out from reel Ø 13 ± 0.2Ø 21 ± 0.8 100 mm min. with cover tape Not indicated tolerances ± 0.1 Reel size "Y" T: Ø 330 ± 2 32.4 + 2/0 38.4 max.

www.vishay.com Vishay Revision: 08-Feb-17 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED