CNY17 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 12
Technical content
Features
High BVCEO: 70 V Minimum (CNY17XM, CNY17FXM, MOC8106M) Closely Matched Current Transfer Ratio (CTR) Minimizes Unit−to−Unit Variation Current Transfer Ratio In Select Groups Very Low Coupled Capacitance Along With No Chip−to−Pin 6 Base Connection for Minimum Noise Susceptibility (CNY17FXM, MOC8106M) Safety and Regulatory Approvals: UL1577, 4,170 V ACRMS for 1 Minute DIN−EN/IEC60747−5−5, 850 V Peak Working Insulation V oltage
Applications
Power Supply Regulators Digital Logic Inputs Microprocessor Inputs Appliance Sensor Systems Industrial Controls See detailed ordering and shipping information on page 8 of this data sheet.
ORDERING INFORMATION
ON = onsemi Logo CNY17 = Device Number V = DIN EN/IEC60747 −5−5 Option (only appears on component ordered with this option) X = One −Digit Year Code YY = Digit Work Week Q = Assembly Package Code ON V X YY Q CNY17−1 43 5 PDIP6 CASE 646BY PDIP6 CASE 646BZ PDIP6 CASE 646BX
Figure 1. Schematics
4 EMITTERNC NC
4 EMITTER
5 COLLECTOR COLLECTOR
As per DIN EN/IEC 60747−5−5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits.
1360 Vpeak
1594 Vpeak
- Safety limit values – maximum values allowed in the event of a failure.
CNY17 Series, MOC8106M www.onsemi.com ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit TOTAL DEVICE TSTG Storage Temperature −40 to +125 C TA Ambient Operating Temperature −40 to +100 C TJ Junction Temperature −40 to +125 C TSOL Lead Solder Temperature 260 for 10 seconds C PD Total Device Power Dissipation @ 25C (LED plus detector) Derate Linearly From 25C 270 mW 2.94 mW/C EMITTER IF Continuous Forward Current 60 mA VR Reverse Voltage 6 V IF (pk) Forward Current – Peak (1 /C0109s pulse, 300 pps) 1.5 A PD LED Power Dissipation 25C Ambient Derate Linearly From 25C 120 mW 1.41 mW/C DETECTOR IC Continuous Collector Current 50 mA VCEO Collector−Emitter Voltage 70 V VECO Emitter Collector Voltage 7 V PD Detector Power Dissipation @ 25C Derate Linearly from 25C 150 mW 1.76 mW/C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.
CNY17 Series, MOC8106M www.onsemi.com
ELECTRICAL CHARACTERISTICS
(TA = 25C unless otherwise specified) INDIVIDUAL COMPONENT CHARACTERISTICS Symbol Parameter Test Conditions Device Min. Typ. Max. Unit EMITTER VF Input Forward Voltage IF = 10 mA All Devices 1.0 1.15 1.50 V IF = 60 mA CNY17XM, CNY17FXM 1.0 1.35 1.65 V CJ Capacitance VF = 0 V, f = 1.0 MHz All Devices − 18 − pF IR Reverse Leakage Current VR = 6 V All Devices − 0.001 10 /C0109A DETECTOR BVCEO Breakdown Voltage Collector−to−Emitter IC = 1 mA, IF = 0 All Devices 70 100 − V BVCBO Collector−to−Base IC = 10 /C0109A, IF = 0 CNY17XM 70 120 − V BVECO Emitter−to−Collector IE = 100 /C0109A, IF = 0 All Devices 7 10 − V ICEO Leakage Current Collector−to−Emitter VCE = 10 V, IF = 0 All Devices − 1 50 nA ICBO Collector−to−Base VCB = 10 V, IF = 0 CNY17XM − − 20 nA CCE Capacitance Collector−to−Emitter VCE = 0, f = 1 MHz All Devices − 8 − pF CCB Collector−to−Base VCB = 0, f = 1 MHz CNY17XM − 20 − pF CEB Emitter−to−Base VEB = 0, f = 1 MHz CNY17XM − 10 − pF TRANSFER CHARACTERISTICS Symbol Parameter Test Conditions Device Min. Typ. Max. Unit COUPLED CTR Current Transfer Ratio IF = 10 mA, VCE = 10 V MOC8106M 50 − 150 % IF = 10 mA, VCE = 5 V CNY171M, CNY17F1M 40 − 80 % IF = 10 mA, VCE = 5 V CNY172M, CNY17F2M 63 − 125 % IF = 10 mA, VCE = 5 V CNY173M, CNY17F3M 100 − 200 % IF = 10 mA, VCE = 5 V CNY174M, CNY17F4M 160 − 320 % VCE(SAT) Collector−Emitter Saturation Voltage IC = 0.5 mA, IF = 5 mA MOC8106M − − 0.4 V IC = 2.5 mA, IF = 10 mA CNY17XM/CNY17FXM − −
CNY17 Series, MOC8106M www.onsemi.com AC CHARACTERISTICS Symbol Parameter Test Conditions Device Min. Typ. Max. Unit NON−SATURATED SWITCHING TIME ton Turn−On Time IC = 2.0 mA, VCC = 10 V, RL = 100 /C0087 All Devices − 2.0 10.0 /C0109s toff Turn−Off Time IC = 2.0 mA, VCC = 10 V, RL = 100 /C0087 All Devices − 3.0 10.0 /C0109s td Delay Time IF = 10 mA, VCC = 5 V, RL = 75 /C0087 CNY17XM/CNY17FXM − − 5.6 /C0109s tr Rise Time IF = 10 mA, VCC = 5 V, RL = 75 /C0087 CNY17XM/CNY17FXM − − 4.0 /C0109s ts Storage Time IF = 10 mA, VCC = 5 V, RL = 75 /C0087 CNY17XM/CNY17FXM − − 4.1 /C0109s tf Fall Time IF = 10 mA, VCC = 5 V, RL = 75 /C0087 CNY17XM/CNY17FXM − − 3.5 /C0109s SATURATED SWITCHING TIME td Delay Time IF = 20 mA, VCC = 5 V, RL = 1 k/C0087 CNY171M/F1M − − 5.5 /C0109s IF = 10 mA, VCC = 5 V, RL = 1 k/C0087 CNY172M/3M/4M CNY17F2M/F3M/F4M − − 8.0 /C0109s tr Rise Time IF = 20 mA, VCC = 5 V, RL = 1 k/C0087 CNY171M/F1M − − 4.0 /C0109s IF = 10 mA, VCC = 5 V, RL = 1 k/C0087 CNY172M/3M/4M CNY17F2M/F3M/F4M − − 6.0 /C0109s ts Storage Time IF = 20 mA, VCC = 5 V, RL = 1 k/C0087 CNY171M/F1M − − 34.0 /C0109s IF = 10 mA, VCC = 5 V, RL = 1 k/C0087 CNY172M/3M/4M CNY17F2M/F3M/F4M − − 39.0 /C0109s tf Fall Time IF = 20 mA, VCC = 5 V, RL = 1 k/C0087 CNY171M/F1M − − 20.0 /C0109s IF = 10 mA, VCC = 5 V, RL = 1 k/C0087 CNY172M/3M/4M CNY17F2M/F3M/F4M − − 24.0 /C0109s ISOLATION CHARACTERISTICS Symbol Parameter Test Conditions Min. Typ. Max. Unit VISO Input−Output Isolation Voltage t = 1 Minute 4170 − − VACRMS CISO Isolation Capacitance VI−O = 0 V, f = 1 MHz − 0.2 − pF RISO Isolation Resistance VI−O = 500 VDC, TA = 25C 1011 − − /C0087
Figure 12. Reflow Profile Ramp/C0042up Rate (tL to tP) 3/C0095C/second max. Ramp/C0042down Rate (TP to TL) 6/C0095C / second max. Time 25/C0095C to Peak Temperature 8 minutes max. Table 1. ORDERING INFORMATION Specification Brochure, BRD8011/D.
- The product orderable part number system listed in this table also applies to the CNY17FXM product family and the MOC8106M de vice.
PDIP6 8.51x6.35, 2.54P CASE 646BX ISSUE O DATE 31 JUL 2016 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98AON13449GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1PDIP6 8.51X6.35, 2.54P © Semiconductor Components Industries, LLC, 2019 www.onsemi.com
PDIP6 8.51x6.35, 2.54P CASE 646BY ISSUE A DATE 15 JUL 2019 A B MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98AON13450GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1PDIP6 8.51x6.35, 2.54P © Semiconductor Components Industries, LLC, 2018 www.onsemi.com
PDIP6 8.51x6.35, 2.54P CASE 646BZ ISSUE O DATE 31 JUL 2016 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98AON13451GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1PDIP6 8.51X6.35, 2.54P © Semiconductor Components Industries, LLC, 2019 www.onsemi.com
onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales