CN1H2N KOA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confi rm technical specifications before you order and/or use. PAGE 1 OF 4 Flat Chip Resistor Array Type CN_K/N 1. Features I Manufactured to Type RK73 standards I Less board space than individuals chips I Marked with resistance value I Isolated resistor elements I Products with lead-free terminations meet EU-RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC 3. Type Designation The type designation shall be the following form: CN Type Nominal Resistance 101 Tolerance J 1F8 Marking Packaging TD Blank: Marking N: No marking K:Convex type with square corners N: Flat type with square corners 2 significant figures + 1 multiplier for ±5% 3 significant figures + 1 multiplier for ±1% TD: 7" paper tape TDD: 10" paper tape Terminal Convex K F: ±1% J: ±5% 2. Dimensions KOA SPEER ELECTRONICS, INC. T Termination Material T: Sn (Other termination styles available, contact factory for options) Size CERTIFIED CERTIFIED t W a L p b C d Protective Coating Resistive Film Ceramic Substrate Inner Electrode Electrode e CN___K Convex/Square Corner Elements R1 R2 Rn (n = 2, 4 or 8) CN___K Size Code .031±.004 (0.8±0.1) .039±.004 (1.0±0.1) .079±.004 (2.0±0.1) .039±.004 (1.0±0.1) .063±.006 (1.6±0.15) .126±.006 (3.2±0.15) .063±.006 (1.6±0.15) .012±.008 (0.3±0.2) .006±.004 (0.15±0.1) .014 (0.35) .020 (0.5) .020 (0.5) .012 (0.3) 0.31 (0.8) .020 (0.5) .013±.004 (0.33±0.1) .026±.004 (0.65±0.1) .024±.004 (0.6±0.1) .006±.004 (0.15±0.1) .010±.004 (0.25±0.1) .010±.004 (0.25±0.1) .014±.004 (0.35±0.1) .014±.004 (0.35±0.1) .013±.004 (0.33±0.1) .007±.002 (0.17±0.05) — .020 (0.15±0.1) 1E2K 1E4K 1J2K 1J4K p (ref.) .020 (0.5) 0.024 (0.607) .013±.004 (0.33±0.1) .014±.004 (0.35±0.1) eb (ref.)a (ref.)tdCWL Dimensions inches (mm) .012±.006 (0.3±0.15) .006±.004 (0.15±0.1) .149±.004 (3.8±0.1) .063±.008 (1.6±0.2) .012±.004 (0.3±0.1) .017±.004 (0.44±0.1) .012±.004 (0.296±0.1) .012±.004 (0.3±0.1) .020±.004 (0.5±0.1) 1F8K 1F8N — .012±.004 (0.296±0.1) NEW

Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confi rm technical specifications before you order and/or use. PAGE 2 OF 4 4. Standard Applications 5. Environmental Applications For temperature in excess of 70° C, the load shall be derated in accordance with the following figure. KOA SPEER ELECTRONICS, INC. Derating Curve Surface Temperature Rise % Rated Power 100 70 125 Ambient Temperature (∞C) 00 -55 Temperature Rise (°C) 100 50 100 150 200 % Rated Power CN1E2K CN1E2K 2 CN1E4K 1 CN1E4K 2 CN1F8K 1 CN1F8K 2 CN1H2N Absolute Maximum Working Voltage Resistance Range E-24 (J±5%) Part Designation Maximum Overload Voltage (5 Secs. Max.) Operating Temperature Range Power Rating @ 70°C (Per Element) T.C.R. (ppm/°C) Max. CN1E2K CN1H2N CN1F8K CN1F8NK CN1E4K CN1J2K 1/16W (.063W) 1/32W (.031W) 25V 50V 50V 12.5V 25V 100V 25V 50V ±400:R<10Ω 10Ω - 1MΩ 10Ω - 1MΩ CN1J4K 1/16W (.063W)* 0.25W per package Resistance Range E-96 (F±1%) 10Ω - 100kΩ – – – 1Ω - 1MΩ NEW * Note that network resistors generate higher heat rather than single flat chip resistor under rated power output

5.1 Voltage Rating

Resistors shall have a rated direct current (DC) continuous working voltage or an approximate sine wave root mean square (RMS) alternating current (AC) continuous working voltage at a commercial line frequency and wave form corresponding to the power rating, as determined from the following formula: In no case shall the rated DC or RMS AC continuous working voltage be greater than the applicable maximum value. SS-242 R7 Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confi rm technical specifications before you order and/or use. PAGE 3 OF 4 KOA SPEER ELECTRONICS, INC. Item Requirement Test Method Temperature Within specified limits JIS C 5202 5.2B Coefficient -55° C ~ +125° C Short-time ±(2.0% +0.1Ω) JIS C 5202 5.5A Overload No visual damage Rated voltage x 2.5 Resistance to ±(1.0% +0.1Ω) JIS C 5202 6.4 Soldering Heat 260° C ± 5° C 10 sec. ± 1 sec. Solderability More than 75% of the surface of electrode JIS C 5202 6.5 shall be covered with new solder 230° C ± 5° C 2 sec. ± 0.5 sec. Temperature ±(1.0% +0.1Ω) JIS C 5202 7.4 Cycling No mechanical damage 5 cycles of the change in temp. given in the following steps Step 1: -55° C ± 3° C / 30 minutes Step 2: Normal temp. 10 min. to 15 min. Step 3: +125° C ± 3° C / 30 minutes Step 4: Normal temp. 10 min. to 15 min. Heat ±(1.0% +0.1Ω) JIS C 5202 7.2 Resistance 125° C ± 2° C 1000 Hr Endurance ±(5.0% +0.1Ω) JIS C 5202 7.9 (Moisture Load) 40° C ± 2° C / 90 ~ 95% RH rated voltage 1000 Hr ± Hr Endurance ±(5.0% +0.1Ω) JIS C 5202 7.10 (Rated Load) 70° C ± 2° C rated voltage 1000 Hr ± Hr 6. Characteristics Where, E = Rated voltage (V) P = Power rating (W) R = Nominal resistance (Ω)E =√P x R 4.8 4.8

  1. Packaging Specifications

8.1 Paper Tape Dimensions

Bolivar Drive I P.O. Box 547 I Bradford, PA 16701 I USA I 814-362-5536 I Fax 814-362-8883 I www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confi rm technical specifications before you order and/or use. PAGE 4 OF 4 KOA SPEER ELECTRONICS, INC. 9. Body Color

9.1 Body Convex

Body Color: Black Marking Color: White

9.2 Marking

±5% 3-digit number 103 10000Ω 10kΩ ±1% 4-digit number 1002 10000Ω 10kΩ Type Component Size (mm) L W T Quantity/ Reel (Pieces) Taping (mm) Reel SizeA B W P1 T1 Carrier Tape (Notes) Reel holes, shapes and design are examples(Notes) Dotted lines are applicable to only "TP" and "TB." ø a ø 13 ø de Central hole (mm)Reel (TP) B A 1.5 +0.1 W T1 T1 Carrier Tape Type ød (mm) e (mm) All 21 2