SPC4 OMEGA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
-GN Green LED display -AI Isolated analog output -230V 230 Vac power -DC10/32 10 to 32 Vdc power -DC26/56 26 to 56 Vdc power Specifications Input: Thermocouples Type J, K, T, and J DIN RTD Input: 100 Ω Pt (0.00385 curve) 2-, 3- and 4-wire selectable Signal Input: 240 Vrms overvoltage protection Outputs: 2 Form C (SPDT) relays, rated 5 A, 250 Vac; programmable through software for proportional/ non-proportional (on-off) control, or active high/low alarms with latching/ nonlatching relays Relay Hysteresis: Programmable for 0 to 9999 Accuracy: ±0.5% @ 25°C (77°F) after 30 minute warm-up Temperature Coefficient: ±50 PPM/°C Read Rate: 3/s Step Response: 2 seconds Power: 115 or 230 Vac ±10%, 0 to 60 Hz; 8 W maximum CN1000 Series Display, Output and Power Options Model No. Description SPC4 NEMA 4 heavy-duty splashproof lens with screw clamp SPC18 NEMA 4 splashproof lens with spring clip CNQUENCHARC Noise suppression RC snubber (2 leads), 110 to 230 Vac Accessories Comes complete with operator’s manual. with green display and 26 to 56 Vdc power, and isolated analog output. The CN1000 Series combines the features of a controller, monitor and temperature limit alarm into one easy-to-use digital meter for applications that require maximum versatility. The CN1001TC is selectable for J, K, T or J DIN thermocouple input with 1° resolution. The CN1001RTD is selectable for 100 ΩPlatinum RTD inputs (alpha = 0.00385) with 0.1° resolution. Dual independent setpoints are available and are programmable for proportional or on/off operation. The standard analog output is a retransmission of the temperature input and can be sent to a remote chart recorder, data logger or data acquisition system. U Thermocouple and RTD Input Models U Dual Programmable Setpoints U Analog Output Standard U Latching/Non- Latching Relays U Red or Green Display U Optional Isolated Analog Output U RoHS 2 Compliant To Order Model No. Description Input Type Range -210 to 760°C (-346 to 1400°F) -200 to 900°C CN1001TC (-328 to 1652°F) -270 to 400°C (-454 to 752°F) -270 to 1372°C (-454 to 2500°F) CN1001RTD Programmable 100 V Pt -200 to 850°C RTD controller 2-, 3-, 4-wire (-328 to 1562°F) Programmable thermocouple controller 1⁄8 DIN Digital Proportional, On/Off Temperature Controller Isolation: Dielectric strength to 2500V transient per 3 mm (0.12") spacing based on EN61010 for 260 Vrms or DC NMR: 60 dB CMR: 120 dB Input Resistance: 100 MΩ Operating Temperature: 0 to 50°C (32 to 122°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Analog Output: (optional isolated version): scalable 0 to 10 Vdc or 4 to 20 mA Dimensions:
48 H x 96 W x 152 mm D
Panel Cutout: 45 H x 92 mm W (1.772 x 3.622") Weight: 574 g (1.27 lb) Panel Punches Available CN1001TC shown smaller than actual size.