CMY213

CMY213 INFINEON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

• Ultralinear mixer with integrated IF-amplifier and LO-Buffer for CDMA receiver applications  Typical overall performance at cellular frequen- cies for PLO = – 5 dBm (operation conditions: 3 V, 8m A ; fRF = 850 MHz; fLO = 740 MHz): Gain 9.5 dB, Input IP3 10 dBm, Noise figure 8 dB  RF-frequency range 0.5 - 2.5 GHz  Operating voltage range: 2.6 to 5 V  Small SCT-598-8-1 plastic package ESD: Electrostatic discharge sensitive device, observe handling precautions! Type Marking Ordering Code (tape and reel) Package CMY 213 M6s Q62702-M0032 SCT-598-8-1 Maximum Ratings Parameter Port Symbol Limit Values Unit min. max. Supply Voltage 3, 6 VDD 05 V DC-Voltage at LO Input 4 V6 – 3 0.5 V DC-Voltage at Mixer RF-IF Port 1 V8 – 0.5 + 0.5 V Power into Mixer RF Port 1 PRF –1 0 d B m Power into LO Input 4 PIN, LO – 10 10 dBm Channel Temperature – TCh – 150 °C Operating Temperature – TOP – 30 85 °C Storage Temperature – Tstg – 55 150 °C VPW05982 2 3

Parameter Symbol Values Unit Channel to Soldering Point (GND) RthChS 260 K/W Electrical Characteristics - Mixer Parameter Comment Limit Values Unit min. typ. max. RF - Frequency range External match 0.5 – 2.5 GHz LO - Frequency range External match 0.5 – 2.5 GHz IF Frequency range External match 45 – 250 MHz EHT09240 4 5 CMY 213 8RF IN Mixer GND Mixer DDV Mixer LO IN Source IF AMP IF AMP OUT GND IN IF AMP IF OUT

*Important Note: During production, the RF performance at PCS frequencies is screened. The passed devices also achieve the specified RF performance at cellular frequencies. Typical Performance at Cellular Frequencies* TA = 25 °C; VDD = 3 V, fRF = 850 MHz; fLO = 740 MHz; PLO = – 5 dBm; fIF = 110 MHz; ZS = ZL = 50 Ω; unless otherwise specified Parameter Symbol Limit Values Unit min. typ. max. Total operating Current (Mixer + IF amplifier) IOP – 8.0 9.5 mA Conversion Gain GC 8.0 9.5 – dB SSB Noise Figure FSSB – 8 – dB RF Input -/ IF Output return loss (external matching required) RFIrl/IFOrl – 10 – dB 3rd Order Input Intercept Point IIP3 81 0 – dBm LO-RF Isolation Iso – 10 – dB Test Conditions at PCS Frequencies TA = 25 °C; VDD = 3 V, fRF = 1960 MHz; fLO = 1750 MHz; PLO = – 5 dBm; fIF = 210 MHz; ZS = ZL = 50 Ω; unless otherwise specified Parameter Symbol Limit Values Unit min. typ. max. Total operating Current (Mixer + IF amplifier) IOP – 8.0 9.5 mA Conversion Gain GC 78 . 5 – dB SSB Noise Figure FSSB – 8.5 – dB RF Input -/ IF Output return loss (external matching required) RFIrl/IFOrl – 10 – dB 3rd Order Input Intercept Point IIP3 10 12 – dBm LO-RF Isolation Iso – 6 – dB

Typical Device Behavior at Cellular Frequencies TA = 25 °C; VDD = 3 V, fRF = 850 MHz; fLO = 740 MHz; fIF =1 1 0M H z ; ZS = ZL = 50 Ω; unless otherwise specified -126 EHT09241 dBm Gain, IIP3 Operating Current LO Power -10 -8 -6 -4 0 dB, dBm mA Gain IIP3 OPI Typical Device Behavior at PCS Frequencies TA = 25 °C; VDD = 3 V, fRF = 1960 MHz; fLO = 1750 MHz; fIF =2 1 0M H z ; ZS = ZL = 50 Ω; unless otherwise specified -126 EHT09242 dBm Gain, IIP3 Operating Current LO Power -10 -8 -6 -4 0 dB, dBm mA IIP3 Gain OPI

+3 V GNDLExt5 DV LO Ext4Ext4C L Input Input Ext7C LO Input Ext5C GND S CapV Ext2C LExt2 IF Input Ext6C IF Output +3 V Ext3L CExt3 IF Output IF Buffer

External Components for Cellular Frequencies fRF = 850 MHz; fLO = 740 MHz; fIF =1 1 0M H z Capacitors (Murata 0402) Inductors (Toko) Cext1 1.5 pF Lext1 27 nH LL1005 Cext2 1 nF Lext2 180 nH LL1608 Cext3 18 pF Lext3 150 nH LL1608 Cext4 100 pF Lext4 27 nH LL1005 Cext5 1 nF Lext5 27 nH LL1005 Cext6 1 nF –– Cext7 3 pF –– Cext8 100 nF –– External Components for PCS Frequencies fRF = 1960 MHz; fLO = 1750 MHz; fIF = 210 MHz Capacitors (Murata 0402) Inductors (Toko) Cext1 1 pF Lext1 5.6 nH LL1005 Cext2 1 nF Lext2 68 nH LL1608 Cext3 8 pF Lext3 68 nH LL1608 Cext4 22 pF Lext4 4.7 nH LL1005 Cext5 1 nF Lext5 4.7 nH LL1005 Cext6 1 nF –– Cext7 3 pF –– Cext8 100 nF ––

Size 35 × 35 mm2 C RF Input EHT09228 Input LO C IF Output IC1 CMY RF LO L L C L C IC1 N.C. C10 GND d_MIXV d_BUFV GND IF C2 2L

General Description and Notes for CMY 213 CMY 213 is a general purpose down-converter device designed for multiple applications such as cellular and PCS mobile phones, ISM bands, GPS receivers, L-band satellite terminals, WLAN and pagers. Due to its excellent intermodulation characteristics and its high conversion gain, CMY 213 is particularly suited for CDMA receiver applications. The device combines an ultra-linear mixer with LO - driver and a single stage IF-amplifier in a very small SCT-598-8-1 package. The mixer section of CMY 213 combines low conversion losses and excellent intermodulation characteristics with low requirements of LO- and DC-power. The internal level controlled LO-Buffer enables a good performance over a wide LO level range. The input and output matching of the IF amplifier can be adapted externally within a frequency range from 45 to 250 MHz.

0.75 0.6 A B B0.25 M 2.1 +0.10.5-0.05 -0.050.2+0.1 234 658 +0.2 +0.10.15-0.05 0.11.6 M0.20 A 2.9 0.2+ n. DIN 6784 10˚ max. 10˚ max. 0.1 max. 1.1 max. 0.25 min. 2.6 max. SCT-598-8-1 (Special Package) GPW05982 Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book “Package Information”. Dimensions in mmSMD = Surface Mounted Device