CMX_V01 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • SIP SS R
  • Ratings to 20A @ 60 VDC, 10A @ 100 VDC, 10A @ 60 VDC and 3A @ 200 VDC
  • MOSFET output
  • DC control
  • Low on-state impedance
  • CE Compliant to EN60950-1 CMX SERIES sensata.comCopyright © 2025 Sensata Technologies, Inc.

THERMAL DERATE INFORMATION Load can be wired in location A or B A +VDC +VDC -VDC -VDC B LOAD LOAD2 CONTROL CIRCUIT AMBIENT TEMPERATURE (ºC) 20 40 60 80 LOAD CURRENT (AMPS) CMX100D6 CMX200D3CMX60D5 AMBIENT TEMPERATURE (ºC) 20 40 60 80 LOAD CURRENT (AMPS) CMX60D10 & CMX100D10 AMBIENT TEMPERATURE (ºC) 20 40 60 80 LOAD CURRENT (AMPS) CMX60D20 Page 2 MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] 1.00 MAX (25.4) .300 TYP. (7.6) 0.100 TYP. (2.5) .300 (7.6) .100 (2.5) .040 (1.0) DIA. (4 PLACES) PIN 1: +DC LOAD PIN 2: -DC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL PIN 1: +DC LOAD PIN 2: -DC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL .200 (5.1) 4 3 2 1 1.70 (43.1) 1.100 (27.9) .700 (17.8) 1.00 MAX (25.4) .300 TYP. (7.6) 0.100 TYP. (2.5) .300 MAX (7.6) .100 (2.5) .080 (2.0) DIA. (4 PLACES) .200 (5.1) 4 3 2 1 1.70 MAX (43.1) 1.100 (27.9) .700 (17.8) sensata.comCopyright © 2025 Sensata Technologies, Inc.

Designed in accordance with the requirements of IEC 62314 IEC60335-1: Resistance to heat and fire meets the requirements of section 30, evaluated by TUV SUD. Glow Wire Test, per requirements of IEC/EN 60695-2-10 and IEC/EN 60695-2-11 Ball Pressure Test, per requirements of IEC/EN 60695-10-2 AGENCY APPROVALS & CERTIFICATIONS E116950 (3 Amps, 6 Amps and 10 Amps Models) Page 3 GENERAL NOTES 1)All parameters at 25°C unless otherwise specified. 2)At rated current (RDS-ON). 3)Dielectric and insulation resistance are measured between input and output. 5)Inductive loads should be diode suppressed. 4)Low temperature range is limited to -10°C in 20 Amps models. 6) At 55 VDC. WARNINGS RISK OF M ATERIAL DAMAGE AND HOT ENCLOSURE

  • The product’s side panels may be hot, allow the product to cool before touching
  • Follow proper mounting instructions including torque values
  • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARCH FLASH
  • Disconnect all power before installing or working with this equipment
  • V erify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury Rev. 03/028/2025 ECN 493787 FDE-07-01 Rev. B CONTACT USSensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. sensata.comCopyright © 2025 Sensata Technologies, Inc. Americas +1 (800) 350 2727 sales.crydom@sensata.com Europe, Middle East & Africa +44 (1202) 416170 ssr-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808