CMW SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Compact and Lightweight – The CMW provides pure sine wave power from a small footprint designed to fit in tight vehicle and marine spaces. And it is lightweight, so won’t weigh you down.
  • At-a-Glance Status – The inverter’s status can be determined at a glance with the easy to read LED light.
  • Digital Display – The alphanumeric display shows the inverter’s battery voltage, total AC output power, along with additional operation codes.
  • USB Port – Power and charge your USB-enabled device with the available USB port.
  • GFCI AC Outlet – Plug in two pieces of equipment directly to the CMW and know that the GFCI outlet will quickly stop the flow of electricity should a ground fault occur. The outlet also comes with an LED indicator and test/reset capability.
  • Automatic Transfer Switch Option – The CMW3012H automatically switches between shore power and inverter/battery power.
  • AC Wiring Access Cover – The CMW3012H provides access to the AC wiring terminals to allow for hardwiring the AC output. Options
  • Remote Switch – Use the optional CSW-RS remote switch for even easier on/off access away from the inverter. The CSW-RS comes with a 20’ cable.
  • Transfer Switch – Use the optional 15 amp CSW-TS15 transfer switch to automatically switch AC load connections between utility/generator power and the AC output of the CMW inverters. Introduction The Magnum-Dimensions CMW Series inverter from Sensata Technologies is a cost effective modified sine wave inverter designed for clean, compact power on the go. The CMW will safely run many small appliances and provide you with reliable AC power for troublefree use. Model Numbers
  • CMW412
  • CMW1012
  • CMW1512
  • CMW3012H (hardwire) Available For
  • Emergency Medical Services
  • Marine Systems
  • Military Vehicles
  • RV Systems
  • Trucks
  • Utility Vehicles Available Accessories
  • Remote Switch (CSW-RS)
  • Transfer Switch (CSW-TS15) Modified Sine Wave 12 400-

3000 VA Battery Voltage Options Continuous Output Options

Copyright © 2019 Sensata Technologies, Inc. www.sensata.com SPECIFICATIONS CMW412 CMW1012 CMW1512 CMW3012H INVERTER SPECIFICATIONS - OUTPUT Continuous power at nominal DC voltage 400 watts 1000 watts 1500 watts 3000 watts Peak surge power 800 watts 2000 watts 3000 watts 6000 watts Continuous current at 12.5 V 38 A 96 A 140 A 280 A AC output voltage at 12.5 VDC 120 VAC ± 5% 120 VAC ± 5% 120 VAC ± 5% 120 VAC ± 5% AC ouput current 3.3 AAC 8.3 AAC 12.5 AAC 25.0 AAC AC output voltage range 104 - 127 VAC 104 - 127 VAC 104 - 127 VAC 104 - 127 VAC AC output frequency 60 Hz ± 0.5 Hz 60 Hz ± 0.5 Hz 60 Hz ± 0.5 Hz 60 Hz ± 0.5 Hz AC output waveform Modified sine wave Modified sine wave Modified sine wave Modified sine wave USB NA 5 V, 750 mA 5 V, 750 mA 5 V, 750 mA INVERTER SPECIFICATIONS - INPUT Nominal DC input voltage 12.5 VDC 12.5 VDC 12.5 VDC 12.5 VDC No load draw < 0.3 ADC < 0.6 ADC < 0.6 ADC < 1.5 ADC High voltage shutdown 15.5 VDC 15.5 VDC 15.5 VDC 15.5 VDC Low voltage alarm 11.2 VDC 11.2 VDC 11.2 VDC 11.0 VDC SdL /

12.1 VDC SdH

Low voltage shutdown 10.5 VDC 10.5 VDC 10.5 VDC 10.5 VDC SdL /

11.8 VDC SdH

Low voltage recovery 11.8 VDC 11.8 VDC 11.8 VDC 12.0 VDC SdL /

12.6 VDC SdH

GENERAL FEATURES AND CAPABILITIES Output power warning NA Yes, with warning code Yes, with warning code Yes, with warning code Output power shutdown Yes Yes, with shutdown code Yes, with shutdown code Yes, with shutdown code Temperature warning NA Yes, with warning code Yes, with warning code Yes, with warning code Temperature shutdown Yes Yes, with shutdown code Yes, with shutdown code Yes, with shutdown code Display status indictator LED: Power, Fault LED: Power, Fault LED: Power, Fault LED: Power, Fault Digital display None Volts in, power out, error codes Volts in, power out, error codes Volts in, power out, error codes AC receptacles NEMA 5-15 Dual GFCI w/ LED indicator Dual GFCI w/ LED indicator NEMA 5-20, Dual GFCI w/ LED indicator Listings Conforms to UL458, Certified to CSA STD C22.2 No. 107.1 Warranty One year

InverterInfo@sensata.com Power Conversion www.magnum-dimensions.com Page 3 Rev: 07/20/19 Part#131453 vB Copyright © 2019 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. www.sensata.com ENVIRONMENTAL SPECIFICATIONS Operating temperature -0° C to +40° C (32° F to 104° F) PHYSICAL SPECIFICATIONS Dimensions (l x w x h) 7.3” x 4.1” x 2.1” (18.5 x 10.4 x 5.3 cm) (32.1 x 17.5 x 8.9 cm) (38.1 x 17.5 x 8.9 cm) (48.3 x 23.0 x 11.5 cm) AGENCY APPROVALS & CERTIFICATIONS

  • Conforms to UL458, Certified to CSA STD C22.2 No. 107.1 Testing for specifications at 25° C. Specifications subject to change without notice. GENERAL NOTES