CMR24_17 CRYDOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

  • Ratings from 35 A to 65 A @ 660 VAC
  • 45mm (width) package
  • SCR output for heavy industrial loads
  • LED input status indicator
  • AC or DC control
  • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 3-32 VDC AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1)

Description

Operating Voltage (47-63Hz) [Vrms] 24-280 Transient Overvoltage [Vpk] 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 Minimum Off-State dv/dt @ Maximum Rated Voltage [V//uni03BCsec] (2) 500 Maximum Load Current [Arms] 65 Minimum Load Current [Arms] 0.25 Maximum Surge Current (50/60Hz, 1 Cycle) [Apk] 1145/1200 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 Minimum Power Factor (with Maximum Load) 0.5 65A35 A 45A 55A CMRD2465 90-140 VAC CMRA24065 CMRD2455CMRD2445 CMRA2455CMRA2445 CMRD2435 CMRA2435 18-36 VAC CMRA2465ECMRA2455ECMRA2445ECMRA2435E 24-280 600 500 0.15 1.6 Thermal Resistance Junction to Case (Rjc) [°C/W] 0.28 Maximum I² t for Fusing (50/60Hz, 1/2 cycle) [A² sec] 4555/4150 24-280 600 500 0.25 1.6 0.5 0.31 24-280 600 500 0.15 1.6 0.5 1.02 0.63 0.5 Series Operational Current 35: 35 Amps 45: 45 Amps 55: 55 Amps 65: 65 Amps Overvoltage Protection Blank: No Included P: Included Control Voltage D: 3-32 VDC A: 90-140 VAC Operating Voltage 24: 24-280 VAC CMR A 24 35 Input Range Blank: Standard Input E: 18-36 VAC Switching Mode Blank: Zero Voltage Turn-on -10: Random Turn-On E P -10 Required for valid part number For options only and not required for valid part number

55 A 65 A35 A 45 A

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. FDE-07-01 REV. A

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. INPUT SPECIFICATIONS (1) CMRD24xxDescription Control Voltage Range (DC or RMS) 3-32 VDC

3.0 VDC

32 VDC

Typical Input Current (4)

1.0 VDC

17 mA @ 5 VDC Maximum Turn-On Time [msec] (3) 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle CMRA24xx 90-140 Vrms

90 Vrms

Maximum Turn-Off Voltage 1.0 VDC 10 Vrms

10 VAC

Maximum Input Current 30 mA - 15 mA @ 120 Vrms GENERAL SPECIFICATIONS ParametersDescription Dielectric Strength, Input/Output (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 V DC) 10 9 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40ºC to 80ºC Ambient Storage Temperature Range -40ºC to 125ºC Status Indicating Display Green LED Weight (typical) 16.8 oz. (476g) Encapsulation Thermally conductive Epoxy Terminals Cage type Maximum Wire Size: Output: AWG 8 (4.8mm) Input: AWG 12(2.5mm) Recommended Terminal Screw Torque Range: Output:10-15 in lb (1.1-1.7 Nm) Input: 5-6 in lb (0.6-0.7 Nm) GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Turn-on time for DC control random turn-on versions is 0.02 msec 4) Input circuitry version incorporates active current limiter.

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION 35 A 2010 30 40 50 60 70 80 Ambient Temp. [°C] Output Current (Arms) 55 A 2010 30 40 50 60 70 80 Ambient Temp. [°C] Output Current (Arms) 45 A 2010 30 40 50 60 70 80 Ambient Temp. [°C] Output Current (Arms) 65 A 2010 30 40 50 60 70 80 Ambient Temp. [°C] Output Current (Arms) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Designed in accordance with the requirements of IEC 62314 AGENCY APPROVALS Rev. 090817 ECN 20317 Agency Approvals LR 81689 126921 UG (up to 90A models only)E116950

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. Rev 073015 DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH.

  • Disconnect all power before installing or working with this equipment.
  • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION.
  • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
  • Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION
  • Eteindre toutes les sources d'énergie de cet appareil avant de travailler dessus de cet appareil
  • Vérifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses. GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION.
  • Stellen Sie jeglichen Strom ab, der dieses Gerät versorgt, bevor Sie an dem Gerät Arbeiten durchführen
  • Vor dem Drehen auf Energie alle Anschlüsse überprüfen und alle Abdeckungen ersetzen. Unterlassung dieser Anweisungen können zum Tode oder zu schweren Verletzungen führen. 存在电击、 爆炸或电弧 闪烁危险
  • 在操作此设 备之前请先 关闭电源。 若不遵守这些说明， 可能会导致严重的 人身伤害甚至死亡。 WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE
  • The product's side panels may be hot, allow the product to cool before touching.
  • Follow proper mounting instructions including torque values.
  • Do not allow liquids or foreign objects to enter this product. Failure to follow these instructions can result in serious injury, or equipment damage. RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER
  • Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher.
  • Respecter les consignes de montage, et notamment les couples de serrage.
  • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels. Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben. GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG
  • Die Seitenwände können heiß sein. Lassen Sie das Produkt abkühlen, bevor Sie es berühren.
  • Beachten Sie die Montageanweisungen,
  • Führen Sie keine Flüssigkeiten oder Fremdkörper in das Produkt ein. Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales. RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD
  • Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfríe antes de tocarlo.
  • Respetar las instrucciones de montaje, y en particular los pares de apretado.
  • No dejar que penetren líquidos o cuerpos extraños en el producto. 如不能正确执行这些操作说明， 极有可能造成严重人体伤害或者设备的损坏。 材料损坏和高温外壳的危险性
  • 产品的一侧面板可能很热，在其冷却前请 不要触碰。
  • 遵照正确的安装说明，包括扭矩值。
  • 请勿让液体及其他异物进入本产品。 RISCHIO DI SCOSSA ELETTRICA O DELL’ESPLOSIONE.
  • Spenga tutta l'alimentazione che fornisce questa apparecchiatura prima di lavorare a questa apparecchiatura
  • Verificare tutti i collegamenti e sostituire tutte le coperture prima dell’accensione L'omissione di queste istruzioni provocherà la morte o lesioni serie La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature. RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO
  • I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo.
  • Seguire le istruzioni di montaggio corrette.
  • Non far entrare liquidi o oggetti estranei in questo apparecchio.

Do not forget to visit us at: www.crydom.com Copyright © 2017 Crydom Inc. Specifications subject to change without notice. ANNEX - ENVIRONMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Name Toxic or hazardous Substance and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium (Cr (VI)) biphenyls (PBB) diphenyl ethers (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 有毒有害物质或元素件部 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点