DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

■ Thick film technology ■ Power rating up to 1.5 watts @ 70 °C ■ High power surge withstanding ■ RoHS compliant* ■ Halogen free** ■ AEC-Q200 compliant

Applications

■ Power supplies ■ Digital meters ■ Consumer electronics ■ LED lighting ■ Industry control boards CMP-A Series High Power Anti-Surge Chip Resistors * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Electrical Characteristics

CMP0603A CMP0805A CMP1206A CMP2010A CMP2512A Power Rating @ 70 °C 0.25 W 0.5 W 0.75 W 1 W 1.5 W Operating Temperature Range -55 °C to +155 °C Derated to Zero Load at +155 °C Maximum Working Voltage 75 V 200 V 250 V 200 V 300 V Maximum Overload Voltage 125 V 300 V 500 V 400 V 600 V Resistance Tolerance ±1 %, ±5 % Temperature Coefficient 10 Ω to 1 MΩ (±1 %, E24 & E96 Series) 10 Ω to 1 MΩ (±5 %, E24 Series ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C Note: Solder pad and trace size should be evaluated and board surface temperature should not exceed +105 °C when applying full rated power. Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com 01B WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS COMPLIANT,**HALOGEN FREE & AEC-Q200 COMPLIANT Additional Information Click these links for more information: PRODUCT SELECTOR TECHNICAL LIBRARY INVENTORY SAMPLES CONTACT

Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CMP-A Series High Power Anti-Surge Chip Resistors Product Dimensions DIMENSIONS: MM (INCHES) Recommended Solder Pad Layout DIMENSIONS: MM (INCHES) L W T CC DD B A L Surge Performance CMP0603A CMP0805A CMP1206A CMP2512A CMP2010A 0.0001 0.001 0.1 0.01 1 Pulse Duration (Seconds) 1000 100 0.1 Peak Power (Watts) Model L W C D T CMP0603A 1.60 ± 0.10 (.063 ± .004) 0.80 ± 0.10 (.031 ± .004) 0.30 ± 0.20 (.012 ± .008) 0.30 ± 0.20 (.012 ± .008) 0.45 ± 0.10 (.018 ± .004) CMP0805A 2.00 ± 0.10 (.079 ± .004) 1.25 ± 0.10 (.049 ± .004) 0.40 ± 0.20 (.016 ± .008) 0.40 ± 0.20 (.016 ± .008) 0.50 ± 0.10 (.020 ± .004) CMP1206A 3.10 ± 0.10 (.122 ± .004) 1.60 ± 0.10 (.063 ± .004) 0.50 ± 0.25 (.020 ± .010) 0.50 ± 0.25 (.020 ± .010) 0.55 ± 0.10 (.022 ± .004) CMP2010A 5.00 ± 0.20 (.197 ± .008) 2.50 ± 0.20 (.098 ± .008) 0.65 ± 0.25 (.026 ± .010) 0.60 ± 0.25 (.023 ± .010) 0.60 ± 0.10 (.024 ± .004) CMP2512A 6.40 ± 0.20 (.252 ± .008) 3.10 ± 0.20 (.122 ± .008) 0.60 ± 0.25 (.024 ± .010) 1.80 ± 0.25 (.071 ± .010) 0.60 ± 0.15 (.024 ± .006) Model A B L CMP0603A 0.90 (.035) 1.00 (.039) 3.00 (.118) CMP0805A 1.30 (.051) 1.15 (.045) 3.50 (.138) CMP1206A 1.80 (.071) 1.30 (.051) 4.70 (.185) CMP2010A 3.00 (.118) 1.50 (.059) 6.80 (.268) CMP2512A 3.70 (.146) 2.45 (.096) 7.60 (.299)

The rated voltage is calculated by the following formula: V= P X R V: Rated Voltage (V) P: Rated Power (W) R: Resistance Value (Ω) Construction OVERCOAT (BLACK) CONDUCTOR Sn PLATING CERAMIC SUBSTRATE RESISTIVE ELEMENT Ni PLATING Soldering Profile Derating Curve Environmental Characteristics Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CMP-A Series High Power Anti-Surge Chip Resistors 125 175 225 275 0 50 100 150 200 250 300 Time (seconds) Temperature (°C) 60 - 120 seconds 90 - 150 seconds 260 °C peak 190 °C 150 °C 220 °C Ramp Down 6 °C/second 255 °C Maximum of 20 seconds between +255 °C and +260 °C Ramp Up 3 °C/second maximum 10 seconds minimum <1> <1> Ambient Temperature (°C) 70 155 100 -55 Power Ratio (%)

CMP 0603 A F X - 1002 E LF Model CMP = High Power Anti-Surge Resistor Size 0603 = 0603 Size 0805 = 0805 Size 1206 = 1206 Size 2010 = 2010 Size 2512 = 2512 Size Feature A = AEC-Q200 Compliant Resistance Tolerance F = ±1 % J = ±5 % TCR (See Electrical Characteristics chart) W = ±200 PPM/°C X = ±100 PPM/°C Resistance Value 1 % Tolerance: (example: 8252 = 82.5K Ω) 5 % Tolerance: (example: 474 = 470K Ω) Packaging E = 5,000 pieces on 180 mm (7 inch) plastic reel, paper tape - CMP0603, CMP0805, CMP1206 4,000 pieces on 180 mm (7 inch) reel, plastic tape - CMP2010, CMP2512 Termination LF = Tin-plated (RoHS Compliant) How to Order Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CMP-A Series High Power Anti-Surge Chip Resistors

Performance Characteristics Test Item Method Procedure Test Limits ΔR Electrical Characteristics AEC-Q200 Table 7.1 Measure the resistance value DC Resistance: F: ±1 % : J : ±5 % TCR: Within the specified High Temperature Exposure (Storage) AEC-Q200 Table 7.3 1000 hours @ T = 125 °C unpowered; Measurement at 24 ±2 hours after test conclusion Temperature Cycling AEC-Q200 Table 7.4 1000 cycles (-55 °C to +125 °C); Measurement at 24 ±2 hours after test conclusion No mechanical damage Moisture Resistance AEC-Q200 Table 7.6 Test 65 °C / 80-100 % RH / 10 cycles; Measurement at 24 ±2 hours after test conclusion (t = 24 hours/cycle) Biased Humidity AEC-Q200 Table 7.7 1000 hours 85 °C / 85 % RH, 10 % of operating power; Measurement at 24 ±2 hours after test conclusion Operational Life AEC-Q200 Table 7.8 Test 1000 hours @ TA = 125 °C at specified rated power; Measurement at 24 ±2 hours after test conclusion Mechanical Shock AEC-Q200 Table 7.13 Test peak value: 100 g’s, wave: hail-sine; Duration: 6 ms, Velocity: 12.3 ft/sec. Within product specification tolerance and no visible damage Vibration AEC-Q200 Table 7.14 5 g’s for 20 min., 12 cycles each of 3 orientations; Test from 10-2000 Hz No mechanical damage Resistance to Solder Heat AEC-Q200 Table 7.15 Solder dipping @ 270 °C ±5 °C for 10 sec. ±1 sec. No mechanical damage Thermal Shock AEC-Q200 Table 7.16 -55 to 155 °C / dwell time 15 min / max transfer time 20 sec / 300 cycles No mechanical damage ESD AEC-Q200-002 Test contact min. 1 KV ∆ R ≤ ±(1 % + 0.1 Ω) Solderability AEC-Q200 Table 7.18 a) Baking 155 °C 4H, dipping 235 °C 5 sec b) Steam 8H, dipping 215 °C 5 sec c) Steam 8H, dipping 260 °C 7 sec Over 95 % of termination must be covered with solder Flammability AEC-Q200 Table 7.20 UL-94 V-0 or V-1 are acceptable Refer UL-94 Board Flex AEC-Q200 Table 7.21 Bending 2 mm (2512, 1206), 3 mm (0805, 0603) No mechanical damage Terminal Strength AEC-Q200 Table 7.22 Force 1.8 Kg for 60 sec No mechanical damage Sulfur-Resistant ASTM B-809 +50 °C ±2 °C, 1000 hours ∆ R ≤ ±(1 % + 0.1 Ω) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CMP-A Series High Power Anti-Surge Chip Resistors

±5 % (E24): CMP0603A, CMP0805A, CMP1206A, CMP2010A, CMP2512A Resistance value is expressed by 3 digits. The first two digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 301 = 30 x 101 = 300 ohms ±1 % (E24/E96): CMP0805A, CMP1206A, CMP2010A, CMP2512A Resistance value is expressed by 4 digits. The first three digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 1542 = 154 x 102 = 15.4K ohms ±1 % (E24): CMP0603A Resistance value is expressed by 3 digits. The first two digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 222 = 22 x 102 = 2.2K ohms ±1 % (E96): CMP0603A Resistance value is expressed by 2 digits followed by an alpha character multiplier. (Refer to marking table below.) Example: 01B = 100 x 101 = 1K ohms 301 1542 222 01B Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CMP-A Series High Power Anti-Surge Chip Resistors This table shows the first two digits for the three-digit E96 part marking scheme. The third character is a letter multiplier: A=10 B=101 C=102 D=103 E=104 F=105 G=106 H=107 X=10-1 Y=10-2 Z=10-3 Code R Value Code R Value Code R Value Code R Value Code R Value 01 100 21 162 41 261 61 422 81 681 02 102 22 165 42 267 62 432 82 698 03 105 23 169 43 274 63 442 83 715 04 107 24 174 44 280 64 453 84 732 05 110 25 178 45 287 65 464 85 750 06 113 26 182 46 294 66 475 86 768 07 115 27 187 47 301 67 487 87 787 08 118 28 191 48 309 68 499 88 806 09 121 29 196 49 316 69 511 89 825 10 124 30 200 50 324 70 523 90 845 11 127 31 205 51 332 71 536 91 866 12 130 32 210 52 340 72 549 92 887 13 133 33 215 53 348 73 562 93 909 14 137 34 221 54 357 74 576 94 931 15 140 35 226 55 365 75 590 95 953 16 143 36 232 56 374 76 604 96 976 17 147 37 237 57 383 77 619 18 150 38 243 58 392 78 634 19 154 39 249 59 402 79 649 20 158 40 255 60 412 80 665

Packaging Dimensions (Conforms to EIA RS-481A) Model Tape Type Pieces per Reel AB WF CMP0603A Paper 5,000 1.10 ± 0.20 (.043 ± .008) 1.90 ± 0.20 (.075 ± .008) 8.00 ± 0.30 (.315 ± .012) 3.50 ± 0.05 (.138 ± .020)CMP0805A 1.65 ± 0.20 (.065 ± .008) 2.40 ± 0.20 (.094 ± .008) CMP1206A 2.00 ± 0.20 (.079 ± .008) 3.60 ± 0.20 (.142 ± .008) CMP2010A Plastic 4,000 2.80 ± 0.20 (.110 ± .008) 5.50 ± 0.20 (.472 ± .012) 5.50 ± 0.05 (.217 ± .020) CMP2512A 3.50 ± 0.20 (.138 ± .008) 6.70 ± 0.20 (.264 ± .008) DIMENSIONS: MM (INCHES) REV. 05/21 2.0 ± 0.5 (.079 ± .020) 178.0 ± 2.0 (7.008 ± .080) (.787)MIN. 13.0 ± 0.5 (.512 ± .020) 60.0 ± 0.5 (2.36 ± .020) 16.7 (.657) MAX. CHP2512: 14.9 (.587) MAX. CHP0603, CHP0805, CHP1206: 10.0 ± 1.5 (.394 ± .059)CHP0603, CHP0805, CHP1206: 13.8 ± 1.5 1.75 ± 0.10 (.069 ± .004) A 4.00 ± 0.10 (.157 ± .004) 4.00 ± 0.10 (.157 ± .004) 1.50 +0.10/-0 2.00 ± 0.05 (.079 ± .002) B W F Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CMP-A Series High Power Anti-Surge Chip Resistors

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS\¸)V\\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\\[UV[PJL<ZLYZZOV\\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM\[OH[Z\\JOPUMVYTH[PVUPZJ\\YYLU[ and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns ®WYVK\\J[PUH\\ZLYHWWSPJH[PVUTH\]HY\ MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\\L[VP[OLJVTIPUH[PVUVM[OL)V\\YUZ® product with other components PU[OL\\ZLY»ZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\\YUZ® WYVK\\J[HSZVJHUHUKKV]HY\PUKPɈLYLU[HWWSPJH[PVUZHUKHJ[\\HSWLYMVYTHUJLTH\]HY\V]LY[PTL<ZLYZZOV\\SKHS^H\Z]LYPM\ the actual performance of the Bourns ®WYVK\\J[PU[OLPYZWLJPÄJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[ Q\\KNTLU[ZYLNHYKPUN[OLHTV\\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY KPɈLYLUJLZIL[^LLUSHIVYH[VY\HUKYLHS^VYSKJVUKP[PVUZ <USLZZ)V\\YUZOHZL_WSPJP[S\KLZPNUH[LKHUPUKP]PK\\HS)V\\YUZ® product as meeting the requirements of a particular industry Z[HUKHYKLN0:6;: VYHWHY[PJ\\SHYX\\HSPÄJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\\YUZPZUV[YLZWVUZPISLMVYHU\ MHPS\\YLVMHUPUKP]PK\\HS)V\\YUZ®WYVK\\J[[VTLL[[OLYLX\\PYLTLU[ZVMZ\\JOPUK\\Z[Y\Z[HUKHYKVYWHY[PJ\\SHYX\\HSPÄJH[PVU<ZLYZ of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to [OLPYKL]PJLZVYHWWSPJH[PVUZ Bourns®WYVK\\J[ZHYLUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKMVY\\ZLPUU\\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\\Z[HPUPUN HWWSPJH[PVUZUVYPUHU\V[OLYHWWSPJH[PVUZ^OLYLMHPS\\YLVYTHSM\\UJ[PVUTH\YLZ\\S[PUWLYZVUHSPUQ\\Y\KLH[OVYZL]LYLWYVWLY[\ VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZS\HUKZWLJPÄJHSS\HWWYV]LKPU^YP[PUNI\[^VH\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZ on a case-by-case basis, use of any Bourns ®WYVK\\J[ZPUZ\\JO\\UH\\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\\ZPZH[ [OL\\ZLY»ZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\\KLKL]PJLZPKLU[PÄLKI\[OL<:-VVKHUK+Y\\N(KTPUPZ[YH[PVUHZ*SHZZ000 KL]PJLZHUKNLULYHSS\LX\\P]HSLU[JSHZZPÄJH[PVUZV\\[ZPKLVM[OL<UP[LK:[H[LZ )V\\YUZL_WYLZZS\PKLU[PÄLZ[OVZL)V\\YUZ ®Z[HUKHYKWYVK\\J[Z[OH[HYLZ\\P[HISLMVY\\ZLPUH\\[VTV[P]LHWWSPJH[PVUZVUZ\\JO WYVK\\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS\HUKZWLJPÄJHSS\HWWYV]LKPU^YP[PUNI\[^V H\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZVUHJHZLI\JHZLIHZPZ\\ZLVMHU\V[OLY)V\\YUZ®Z[HUKHYKWYVK\\J[ZPUHUH\\[VTV[P]L HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\\ZPZUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKHUKPZH[[OL\\ZLY»ZZVSLYPZR0M)V\\YUZ L_WYLZZS\PKLU[PÄLZHZ\\IJH[LNVY\VMH\\[VTV[P]LHWWSPJH[PVUPU[OLKH[HZOLL[MVYP[ZZ[HUKHYKWYVK\\J[ZZ\\JOHZPUMV[HPUTLU[ VYSPNO[PUNZ\\JOPKLU[PÄJH[PVUTLHUZ[OH[)V\\YUZOHZYL]PL^LKP[ZZ[HUKHYKWYVK\\J[HUKOHZKL[LYTPULK[OH[PMZ\\JO)V\\YUZ Z[HUKHYKWYVK\\J[PZJVUZPKLYLKMVYWV[LU[PHS\\ZLPUH\\[VTV[P]LHWWSPJH[PVUZP[ZOV\\SKVUS\IL\\ZLKPUZ\\JOZ\\IJH[LNVY\VM H\\[VTV[P]LHWWSPJH[PVUZ(U\YLMLYLUJL[V)V\\YUZ ®Z[HUKHYKWYVK\\J[PU[OLKH[HZOLL[HZJVTWSPHU[^P[O[OL(,*8Z[HUKHYK VY¸H\\[VTV[P]LNYHKL¹KVLZUV[I\P[ZLSMTLHU[OH[)V\\YUZOHZHWWYV]LKZ\\JOWYVK\\J[MVY\\ZLPUHUH\\[VTV[P]LHWWSPJH[PVU Bourns®Z[HUKHYKWYVK\\J[ZHYLUV[[LZ[LK[VJVTWS\^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS\ VYHU\V[OLYNLULYHSS\LX\\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\\J[ZKLZPNULKVYTHU\\MHJ[\\YLKMVY \\ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\\YUZL_WYLZZS\PKLU[PÄLZ)V\\YUZ® standard products that are suitable for use in aircraft VYZWHJLHWWSPJH[PVUZVUZ\\JOWYVK\\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS\HUKZWLJPÄJHSS\ HWWYV]LKPU^YP[PUNI\[^VH\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZVUHJHZLI\JHZLIHZPZ\\ZLVMHU\V[OLY)V\\YUZ ® standard WYVK\\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\\ZPZUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKHUKPZH[ the user’s sole risk. ;OL\\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\\YUZ ® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns®J\\Z[VTWYVK\\J[ZHYLZWLJPHSS\KLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\\YUZ HUK[OL\\ZLYYLNHYKPUN[OL\\ZLHUKSL]LSVMZ\\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\\YUZ® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns®WYVK\\J[ZVY[LJOUVSVN\MVY\\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL KLZPNUKL]LSVWTLU[WYVK\\J[PVU\\ZLVYZ[VJRWPSPUNVMU\\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL\\\ZL Bourns®WYVK\\J[ZVY[LJOUVSVN\PUHU\MHJPSP[\^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ HWWS\[VHSS\\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\\KPUNLTIHYNVZVYPU[LYUH[PVUHS YLN\\SH[PVUZ-\\Y[OLY)V\\YUZ® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without WYPVYH\\[OVYPaH[PVUMYVT)V\\YUZHUKVY[OL<:.V]LYUTLU[ILYLZVSK[YHUZMLYYLKVYYLL_WVY[LK[VHU\WHY[\UV[LSPNPISL [VYLJLP]L<:JVTTVKP[PLZZVM[^HYLHUK[LJOUPJHSKH[H ;V[OLTH_PT\\TL_[LU[WLYTP[[LKI\HWWSPJHISLSH^)V\\YUZKPZJSHPTZPHU\HUKHSSSPHIPSP[\MVYZWLJPHSW\\UP[P]LJVUZLX\\LU[PHS PUJPKLU[HSVYPUKPYLJ[KHTHNLZVYSVZ[YL]LU\\LZVYSVZ[WYVÄ[ZHUKPPHU\HUKHSSPTWSPLK^HYYHU[PLZPUJS\\KPUNPTWSPLK^HYYHU[PLZ VMÄ[ULZZMVYWHY[PJ\\SHYW\\YWVZLUVUPUMYPUNLTLU[HUKTLYJOHU[HIPSP[\ )RU\\RXUFRQYHQLHQFHFRSLHVRIWKLV/HJDO'LVFODLPHU1RWLFHZLWK*HUPDQ6SDQLVK-DSDQHVH7UDGLWLRQDO&KLQHVHDQG6LPSOLÀHG&KLQHVH bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf