CMP-Q BOURNS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Features

n Power rating up to 1.5 watts @ 70 °C n High power surge withstanding n RoHS compliant* n Halogen free** n AEC-Q200 compliant

Applications

Electrical Characteristics

CMP0603Q CMP0805Q CMP1206Q CMP2010Q CMP2512Q Power Rating @ 70 °C 0.25 W 0.5 W 0.75 W 1 W 1.5 W Operating Temperature Range -55 °C to +155 °C Derated to Zero Load at +155 °C Maximum Working Voltage 75 V 200 V 250 V 200 V 300 V Maximum Overload Voltage 125 V 300 V 500 V 400 V 600 V Resistance Tolerance ±1 %, ±5 % Temperature Coefficient 10 Ω to 1 MΩ (±1 %, E24 & E96 Series) 10 Ω to 1 MΩ (±5 %, E24 Series ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C Note: Solder pad and trace size should be evaluated and board surface temperature should not exceed +105 °C when applying full rated power. Additional Information Click these links for more information: PRODUCT SELECTOR TECHNICAL LIBRARY INVENTORY SAMPLES CONTACT * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov AUTOMOTIVE GRADE

CMP-Q Series High Power Anti-Surge Chip Resistors Product Dimensions Model L W C D T CMP0603Q 1.60 ± 0.10 (.063 ± .004) 0.80 ± 0.10 (.031 ± .004) 0.30 ± 0.20 (.012 ± .008) 0.30 ± 0.20 (.012 ± .008) 0.45 ± 0.10 (.018 ± .004) CMP0805Q 2.00 ± 0.10 (.079 ± .004) 1.25 ± 0.10 (.049 ± .004) 0.40 ± 0.20 (.016 ± .008) 0.40 ± 0.20 (.016 ± .008) 0.50 ± 0.10 (.020 ± .004) CMP1206Q 3.10 ± 0.10 (.122 ± .004) 1.60 ± 0.10 (.063 ± .004) 0.50 ± 0.25 (.020 ± .010) 0.50 ± 0.25 (.020 ± .010) 0.55 ± 0.10 (.022 ± .004) CMP2010Q 5.00 ± 0.20 (.197 ± .008) 2.50 ± 0.20 (.098 ± .008) 0.65 ± 0.25 (.026 ± .010) 0.60 ± 0.25 (.023 ± .010) 0.60 ± 0.10 (.024 ± .004) CMP2512Q 6.40 ± 0.20 (.252 ± .008) 3.10 ± 0.20 (.122 ± .008) 0.60 ± 0.25 (.024 ± .010) 1.80 ± 0.25 (.071 ± .010) 0.60 ± 0.15 (.024 ± .006) DIMENSIONS: MM (INCHES) L B W A T CC DD L Recommended Solder Pad Layout Model A B L CMP0603Q 0.90 (.035) 1.00 (.039) 3.00 (.118) CMP0805Q 1.30 (.051) 1.15 (.045) 3.50 (.138) CMP1206Q 1.80 (.071) 1.30 (.051) 4.70 (.185) CMP2010Q 3.00 (.118) 1.50 (.059) 6.80 (.268) CMP2512Q 3.70 (.146) 2.45 (.096) 7.60 (.299) L B W A T CC DD L DIMENSIONS: MM (INCHES) Surge Performance CMP0603Q CMP0805Q CMP1206Q CMP2512Q CMP2010Q 0.0001 0.001 0.10.01 1 Pulse Duration (Seconds) 1000 100 0.1 Peak Power (Watts) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CMP-Q Series High Power Anti-Surge Chip Resistors Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Construction OVERCOAT (BLACK) CONDUCTOR Sn PLATING CERAMIC SUBSTRATE RESISTIVE ELEMENT Ni PLATING Rated Voltage The rated voltage is calculated by the following formula: V= P X R V: Rated Voltage (V) P: Rated Power (W) R: Resistance Value (W) Environmental Characteristics Derating Curve Ambient Temperature (°C) 70 155 100 -55 Power Ratio (%) Soldering Profile 125 175 225 275 05 0 100 150 200 250 300 Time (seconds) Temperature (°C) 60 - 120 seconds 90 - 150 seconds 260 °C peak 190 °C 150 °C 220 °C Ramp Down 6 °C/second 255 °C Maximum of 20 seconds between +255 °C and +260 °C Ramp Up 3 °C/second maximum 10 seconds minimum <1> <1>

CMP-Q Series High Power Anti-Surge Chip Resistors How to Order CMP 0603 Q F X - 1002 E LF Model CMP = High Power Anti-Surge Resistor Size 0603 = 0603 Size 0805 = 0805 Size 1206 = 1206 Size 2010 = 2010 Size 2512 = 2512 Size Feature Q = AEC-Q200 Compliant Resistance Tolerance F = ±1 % J = ±5 % TCR (See Electrical Characteristics chart) W = ±200 PPM/°C X = ±100 PPM/°C Resistance Value 1 % Tolerance: (example: 8252 = 82.5K Ω) 5 % Tolerance: (example: 474 = 470K Ω) Packaging E = 5,000 pieces on 180 mm (7 inch) plastic reel, paper tape - CMP0603Q, CMP0805Q, CMP1206Q 4,000 pieces on 180 mm (7 inch) reel, plastic tape - CMP2010Q, CMP2512Q Termination LF = Tin-plated (RoHS Compliant) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CMP-Q Series High Power Anti-Surge Chip Resistors Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Performance Characteristics Test Item Method Procedure Test Limits DR Electrical Characteristics AEC-Q200 Table 7.1 Measure the resistance value DC Resistance: F: ±1 % : J : ±5 % TCR: Within specifications High Temperature Exposure (Storage) AEC-Q200 Table 7.3 1000 hours @ T = 125 °C unpowered; Measurement at 24 ±2 hours after test conclusion Temperature Cycling AEC-Q200 Table 7.4 1000 cycles (-55 °C to +125 °C); Measurement at 24 ±2 hours after test conclusion No mechanical damage Moisture Resistance AEC-Q200 Table 7.6 Test 65 °C / 80-100 % RH / 10 cycles; Measurement at 24 ±2 hours after test conclusion (t = 24 hours/cycle) Biased Humidity AEC-Q200 Table 7.7 1000 hours 85 °C / 85 % RH, 10 % of operating power; Measurement at 24 ±2 hours after test conclusion Operational Life AEC-Q200 Table 7.8 Test 1000 hours @ TA = 125 °C at specified rated power; Measurement at 24 ±2 hours after test conclusion Mechanical Shock AEC-Q200 Table 7.13 Test peak value: 100 g’s, wave: hail-sine; Duration: 6 ms, Velocity: 12.3 ft/sec. Within product specification tolerance and no visible damage Vibration AEC-Q200 Table 7.14 5 g’s for 20 min., 12 cycles each of 3 orientations; Test from 10-2000 Hz No mechanical damage Resistance to Solder Heat AEC-Q200 Table 7.15 Solder dipping @ 270 °C ±5 °C for 10 sec. ±1 sec. No mechanical damage Thermal Shock AEC-Q200 Table 7.16 -55 to 155 °C / dwell time 15 min / max transfer time 20 sec / 300 cycles No mechanical damage ESD AEC-Q200-002 Test contact min. 1 kV ∆ R ≤ ±(1 % + 0.1 Ω) Solderability AEC-Q200 Table 7.18 a) Baking 155 °C 4H, dipping 235 °C 5 sec b) Steam 8H, dipping 215 °C 5 sec c) Steam 8H, dipping 260 °C 7 sec Over 95 % of termination must be covered with solder Flammability AEC-Q200 Table 7.20 UL-94 V-0 or V-1 are acceptable Refer UL-94 Board Flex AEC-Q200 Table 7.21 Bending 2 mm (2512Q, 1206Q), 3 mm (0805Q, 0603Q) No mechanical damage Terminal Strength AEC-Q200 Table 7.22 Force 1.8 Kg for 60 sec No mechanical damage

CMP-Q Series High Power Anti-Surge Chip Resistors Typical Part Marking ±5 % (E24): CMP0603Q, CMP0805Q, CMP1206Q, CMP2010Q, CMP2512Q Resistance value is expressed by 3 digits. The first two digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 301 = 30 x 101 = 300 ohms ±1 % (E24/E96): CMP0805Q, CMP1206Q, CMP2010Q, CMP2512Q Resistance value is expressed by 4 digits. The first three digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 1542 = 154 x 102 = 15.4K ohms ±1 % (E24): CMP0603Q Resistance value is expressed by 3 digits. The first two digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 222 = 22 x 102 = 2.2K ohms ±1 % (E96): CMP0603Q Resistance value is expressed by 2 digits followed by an alpha character multiplier. (Refer to marking table below.) Example: 01B = 100 x 101 = 1K ohms 301 1542 222 01B 301 1542 222 01B 301 1542 222 01B 301 1542 222 01B This table shows the first two digits for the three-digit E96 part marking scheme. The third character is a letter multiplier: A=100 B=101 C=102 D=103 E=104 F=105 G=106 H=107 X=10-1 Y=10-2 Z=10-3 Code R Value Code R Value Code R Value Code R Value Code R Value 01 100 21 162 41 261 61 422 81 681 02 102 22 165 42 267 62 432 82 698 03 105 23 169 43 274 63 442 83 715 04 107 24 174 44 280 64 453 84 732 05 110 25 178 45 287 65 464 85 750 06 113 26 182 46 294 66 475 86 768 07 115 27 187 47 301 67 487 87 787 08 118 28 191 48 309 68 499 88 806 09 121 29 196 49 316 69 511 89 825 10 124 30 200 50 324 70 523 90 845 11 127 31 205 51 332 71 536 91 866 12 130 32 210 52 340 72 549 92 887 13 133 33 215 53 348 73 562 93 909 14 137 34 221 54 357 74 576 94 931 15 140 35 226 55 365 75 590 95 953 16 143 36 232 56 374 76 604 96 976 17 147 37 237 57 383 77 619 18 150 38 243 58 392 78 634 19 154 39 249 59 402 79 649 20 158 40 255 60 412 80 665 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

CMP-Q Series High Power Anti-Surge Chip Resistors Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Packaging Dimensions (Conforms to EIA RS-481A) Model Tape Type Pieces per Reel A B W F CMP0603Q Paper 5,000 1.10 ± 0.20 (.043 ± .008) 1.90 ± 0.20 (.075 ± .008) 8.00 ± 0.30 (.315 ± .012) 3.50 ± 0.05 (.138 ± .020)CMP0805Q 1.65 ± 0.20 (.065 ± .008) 2.40 ± 0.20 (.094 ± .008) CMP1206Q 2.00 ± 0.20 (.079 ± .008) 3.60 ± 0.20 (.142 ± .008) CMP2010Q Plastic 4,000 2.80 ± 0.20 (.110 ± .008) 5.50 ± 0.20 (.472 ± .012) 5.50 ± 0.05 (.217 ± .020) CMP2512Q 3.50 ± 0.20 (.138 ± .008) 6.70 ± 0.20 (.264 ± .008) 2.0 ± 0.5 (.079 ± .020) 178.0 ± 2.0 (7.008 ± .080) (.787)MIN. 13.0 ± 0.5 (.512 ± .020) 60.0 ± 0.5 (2.36 ± .020) 16.7 (.657) MAX. CHP2512Q: 14.9 (.587) MAX. CHP0603Q, CHP0805Q, CHP1206Q: 10.0 ± 1.5 (.394 ± .059)CHP0603, CHP0805, CHP1206: 13.8 ± 1.5 1.75 ± 0.10 (.069 ± .004) A 4.00 ± 0.10 (.157 ± .004) 4.00 ± 0.10 (.157 ± .004) 1.50 +0.10/-0 2.00 ± 0.05 (.079 ± .002) B W F DIMENSIONS: MM (INCHES)

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap- plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R