CMO5 MTRONPTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. TTL/CMOS Compatible Tri-State Feature for Auto Test Systems Tape & Reel Packaging ±20ppm Available - Please Contact Factory 800-888-1499 or www.champtech.com MODEL CMO5 Frequency Range (MHz) 1.5 to 156.250 Frequency Stability (ppm) Overall (Typical) Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 0°C to 70°C ±25 -40°C to +85°C ±50 Temperature Range (°C) Operating -40°C to +85°C Storage -40°C to +125°C Supply Voltage (V) +5.0 ±10% Input Current (mA) 1.5MHz to 30MHz Symmetry (%) TTL/CMOS 45/55 ELECTRICAL SPECIFICATIONS Start up Time (ms) <10 PART NUMBERING GUIDE CMO5XXXX - Specify Frequency “C” = CMOS “T” = TTL “Blank” = 0oC to 70oC Operating Temp. “M” = -40oC to 85oC Operating Temp. “A” = ±25ppm (-40oC to 85oC Excluding Aging) “B” = ±50ppm “C” = ±100ppm “D” = ±20ppm Excluding Aging (Contact Factory) “Blank” = Fixed Frequency “E” = Tri-State CMO5 Series 5V 5x7mm Surface Mount Crystal Clock Oscillators <10 10TTL/15pFLoad Transistion Times Rise Time (ns) Fall Time (ns) “0” Level (VOL) “1” Level (VOH) 0.5V 2.4V/4.5V >30MHz to 50MHz <30 >50MHz to 156.250MHz <50 1.5MHz to 50MHz >50MHz to 156.250MHz THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE M1 PRODUCT SERIES. Revision: 03-01-07 CMO5 Series 5 x 7 mm, 5.0 Volt, CMOS/TTL, Clock Oscillator
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 or www.champtech.com OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM PIN FUNCTION N/C / Tri-State1 Ground Output 4 + VCC CMO5 Series 5V 5x7mm Surface Mount Crystal Clock Oscillators TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test 100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He 235°C; 30 seconds Lead tension & bend stress Resistance to solvents 1500 g’s MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 1005.6 MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 MIL-STD-202, Mtd 210D, Cond. J MIL-STD-883, Mtd 2004.5, Cond. A, B1 MIL-STD-883, Mtd 2015.8 125°C, powered, 1000 hours minimum MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS 800-888-1499 or www.champtech.com OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM PIN FUNCTION N/C / Tri-State1 Ground Output 4 + VCC CMO5 Series 5V 5x7mm Surface Mount Crystal Clock Oscillators TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test 100°C to 0°C; Water-to-Water; 15 cycles Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He 235°C; 30 seconds Lead tension & bend stress Resistance to solvents 1500 g’s MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 1005.6 MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 MIL-STD-202, Mtd 210D, Cond. J MIL-STD-883, Mtd 2004.5, Cond. A, B1 MIL-STD-883, Mtd 2015.8 125°C, powered, 1000 hours minimum MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS Revision: 03-01-07 THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE M1 PRODUCT SERIES. CMO5 Series 5 x 7 mm, 5.0 Volt, CMOS/TTL, Clock Oscillator
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. MtronPTI Lead Free Solder Profile