CMO3 MTRONPTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. CMOS Compatible Tri-State Feature for Auto Test Systems Tape & Reel Packaging ±20ppm Available - Please Contact Factory 800-888-1499 or www.champtech.com MODEL CMO3 Frequency Range (MHz) 1.5 to 156.250 Frequency Stability (ppm) Overall (Typical) Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 0°C to 70°C ±25 -40°C to +85°C ±50 Temperature Range (°C) Operating -40°C to +85°C Storage -40°C to +125°C Supply Voltage (V) +3.3 ±10% Input Current (mA) 1.5MHz to 35MHz Symmetry (%) CMOS 45/55 ELECTRICAL SPECIFICATIONS Start up Time (ms) <10 PART NUMBERING GUIDE CMO3XXXC - Specify Frequency “Blank” = 0oC to 70oC Operating Temp. “M” = -40oC to 85oC Operating Temp. “A” = ±25ppm (-40oC to 85oC Excluding Aging) “B” = ±50ppm “C” = ±100ppm “D” = ±20ppm Excluding Aging (Contact Factory) “Blank” = Fixed Frequency “E” = Tri-State CMO3 Series 3.3V 5x7mm Surface Mount Crystal Clock Oscillators <10 Rise Time (ns) Fall Time (ns) Load 15pF Transistion Times “0” Level (VOL) “1” Level (VOH) 0.3 3.0 >35MHz to 50MHz >50MHz to 100MHz >100MHz to 156.25MHz <15 <25 <30 1.5MHz to 50MHz >50MHz to 156.250MHz THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE M2 PRODUCT SERIES. Revision: 03-01-07 CMO3 Series 5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator ELECTRICAL SPECIFICATIONS MODEL CMO3 Frequency Range (MHz) 1.5 to 156.250 Frequency Stability (ppm) Overall (Typical) Inclusive of calibration, temperature, voltage, load, shock, vibration, aging 0ºC to 70ºC ±25 -40ºC to +85ºC ±50 Temperature Range (°C) Operating -40°C to +85°C Storage -40°C to +125°C Supply Voltage (V) +3.3 ±10% Input Current (mA) 1.5 MHz to 20 MHz >20 MHz to 50 MHz >50 MHz to 67 MHz >67 MHz to 156.25 MHz <10 <20 <30 <55 Symmetry (%) CMOS 45/55 Transition Time 20% to 80% Vdd 1.5 MHz to 50 MHz >50 MHz to 156.250 MHz Rise Time (ns) <5 <3 Fall Time (ns) <5 <3 Load 15pF “0” Level (VOL) max 10% Vdd “1” Level (VOH) min 90% Vdd Start up Time (ms) <10
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 or www.champtech.com OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM PIN FUNCTION N/C / Tri-State1 Ground Output 4 + VCC CMO3 Series 3.3V 5x7mm Surface Mount Crystal Clock Oscillators TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test 100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He 235°C; 30 seconds Lead tension & bend stress Resistance to solvents 1500 g’s MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 1005.6 MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 MIL-STD-202, Mtd 210D, Cond. J MIL-STD-883, Mtd 2004.5, Cond. A, B1 MIL-STD-883, Mtd 2015.8 125°C, powered, 1000 hours minimum MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS 800-888-1499 or www.champtech.com OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM PIN FUNCTION N/C / Tri-State1 Ground Output 4 + VCC CMO3 Series 3.3V 5x7mm Surface Mount Crystal Clock Oscillators TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test 100°C to 0°C; Water-to-Water; 15 cycles Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He 235°C; 30 seconds Lead tension & bend stress Resistance to solvents 1500 g’s MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 1005.6 MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 MIL-STD-202, Mtd 210D, Cond. J MIL-STD-883, Mtd 2004.5, Cond. A, B1 MIL-STD-883, Mtd 2015.8 125°C, powered, 1000 hours minimum MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS CMO3 Series 5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator Revision: 03-01-07 THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE M2 PRODUCT SERIES.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. MtronPTI Lead Free Solder Profile