CMA-62 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Flat Gain, High IP3 Monolithic Amplifier Page 1 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Ceramic, Hermetically Sealed, Nitrogen filled
  • Low profile case, .045” high
  • Ultra Flat Gain
  • Broadband High Dynamic Range without external Matching Components Product Overview CMA-62+ (RoHS compliant) is a wideband amplifier fabricated using HBT technology and offers ultra flat gain over a broad frequency range and with high IP3. In addition, the CMA-62+, has good input and output return loss over a broad frequency range without the need for external matching components and has dem- onstrated excellent reliability. The MMIC amplifier is bonded to a multilayer integrated LTCC substrate, and then hermetically sealed under a controlled nitrogen atmosphere with gold-plated covers and eutectic AuSn solder. These amplifiers have been tested to MIL requirements for gross leak, fine leak, thermal shock, vibration, acceleration, mechanical shock, and HTOL. Feature Advantages Broad Band: 0.01 to 6.0 GHz Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX, SATELLITE IF Ultra Flat Gain ±0.6 dB over 50 to 3000 MHz; ±0.10 dB over 700 to 2700 MHz eliminates need for gain flattening for most applications High IP3 vs. DC power Consumption 39 dBm typical at 0.05 GHz 37 dBm typical at 0.8 GHz The CMA-62+ matches industry leading IP3 performance relative to device size and power consumption. The combination of the design and HBT Structure provides en - hanced linearity over a broad frequency range as evidence in the IP3 being typically 20 dB above the P 1dB point to 0.8 GHz. This feature makes this amplifier ideal for use in:
  • Driver amplifiers for complex waveform up converter paths
  • Drivers in linearized transmit systems No External Matching Components Required CMA-62+ provides Input and Output Return Loss of 10-23 dB up to 7 GHz without the need for any external matching components Ceramic Hermetic Package Low Inductance, repeatable performance, excellent reliability. CMA-62+ Key Features CASE STYLE: DL1721 50Ω 0.01 to 6 GHz

Flat Gain, High IP3 Monolithic Amplifier Page 2 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits simplified schematic and pin description Function Pin Number Description RF IN 2 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 7 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Ap- plication Circuit”, Fig. 2 GND 1,3,4,5,6,8, Bottom Center Paddle Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. 0.01-6 GHz CASE STYLE: DL1721 CMA-62+ Product Features

  • Flat Gain, ±0.7 dB over 50-4000 MHz
  • Gain, 15.4 dB typ. at 2 GHz
  • High Pout, P1dB 19 dBm typ. at 2 GHz
  • High IP3, 39.0 dBm typ. at 50 MHz; 33.0 dBm at 2GHz
  • Excellent ESD protection, Class 1C for HBM
  • No external matching components required
  • Small size - 3mm x 3mm x 1.14mm
  • Ceramic, hermetic, Nitrogen filled REV. D M155058 CMA-62+ DJ/BT/CP 160222 General Description CMA-62+ (RoHS compliant) is an advanced wideband amplifier fabricated using HBT technology and offers ultra flat gain over a broad frequency range and with high IP3. In addition, the CMA-62+ has good input and output return loss over a broad frequency range without the need for external matching components. Terminal finish is Ni-pd-Au and it has repeatable performance from lot to lot due to fully automated, tightly controlled semiconductor and assembly processes. Typical Applications
  • Base station infrastructure
  • Portable Wireless
  • CATV & DBS
  • MMDS & Wireless LAN
  • LTE RF-IN (2) RF-OUT and DC-IN (7) GND (1,3,4,5,6,8) +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

Monolithic InGap HBT MMIC Amplifier Page 3 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Electrical Specifications1,2 at 25°C, unless noted CMA-62+ Parameter Condition (GHz) Min. Typ. Max. Units Frequency Range2 0.01 6 GHz Gain 0.05 15.5 16.6 18.0 dB 0.8 14.5 15.6 16.5 2.0 15.4 3.0 15.4 4.0 14.0 15.2 16.0 6.0 13.7 Gain Flatness 0.05 - 3.0 ±0.6 dB 0.7 - 2.6 ±0.1 Input Return Loss 0.05 16.5 dB 0.8 10.0 13.6 2.0 14.7 3.0 22.7 4.0 25.9 6.0 13.9 Output Return Loss 0.05 14.1 dB 0.8 12.0 14.3 2.0 14.0 3.0 10.9 4.0 10.0 6.0 14.0 Reverse Isolation 2.0 21.9 dB Output Power @1 dB compression 0.05 17.5 19.9 dBm 0.8 17.5 19.6 2.0 17.2 19.2 3.0 17.6 4.0 15.4 6.0 11.8 Output IP3 0.05 39.0 dB 1.0 36.5 2.0 31.5 33.4 3.0 29.6 4.0 27.3 6.0 23.2 Noise Figure 0.05 4.8 6.2 dB 1.0 5.2 2.0 5.4 6.6 3.0 5.3 4.0 5.6 6.0 5.7 Device Operating Voltage 4.8 5.0 5.2 V Device Operating Current 72 82 92 mA Device Current Variation vs. Temperature3 62 µA/°C Device Current Variation vs. Voltage 0.035 mA/mV Thermal Resistance, junction-to-ground lead 64 °C/W Parameter Ratings Operating Temperature (ground lead) -55°C to 105°C Storage Temperature -65°C to 125°C Operating Current at 5V 120 mA Power Dissipation 0.725 W Input Power (CW) 24 dBm DC Voltage on Pin 3 6V Note: Permanent damage may occur if any of these limits are exceeded. Electrical maximum ratings are not intended for continuous normal operation. For continuous operation, do not exceed 5.2V device voltage. Absolute Maximum Ratings (1) Measured on Mini-Circuits Characterization test board TB-656-62+. See Characterization Test Circuit (Fig. 1) (2) Low Frequency cut-off determined by external coupling capacitors and external bias choke. (3) (Current at 85°C — Current at -45°C)/130 72-74 74-76 76-78 78-80 80-82 82-84 84-86 86-88 88-90 90-92 More DC Current (mA)

Monolithic InGap HBT MMIC Amplifier Page 4 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits CMA-62+ Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-656-62+) Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/tone at output. Characterization Test Circuit Recommended Application Circuit Cblock IN Cblock Ibias OUT Vd RFC Cbypass Vcc 1,3,4,5,6,8 Paddle Fig 2. Test Board includes case, connectors, and components soldered to PCB for component values, please see evaluation board drawing. Product Marking MCL CMA-62 +YYWW Suggested PCB Layout (PL-366) ceramic body model RF-IN RF-OUT7 Vcc (Supply voltage) BLK-18+ Bias-Tee ZX85-12G-S+ DUT 1,3,4,5,6,8 Paddle +5V RF-IN RF-OUT7 Vcc (Supply voltage) BLK-18+ Bias-Tee ZX85-12G-S+ DUT 1,3,4,5,6,8 Paddle +5V TB-656-62+

Monolithic InGap HBT MMIC Amplifier Page 5 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits CMA-62+ ESD Rating Human Body Model (HBM): Class 1C (1000 to <2000V) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M2 (100 to <200V) in accordance with ANSI/ESD STM5.2-1999 MSL Rating Moisture Sensitivity: MSL1 (these parts are hermetic, air cavity and therefore, MSL ratings do not strictly apply. For handling purpose, use MSL1) Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style DL1721 Ceramic package, exposed paddle, Terminal finish: Ni,Pd,Au Tape & Reel F66-1 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K, 2K devices. Suggested Layout for PCB Design PL-366 Evaluation Board TB-656-62+ Environmental Ratings ENV-68 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Test Description Test Method/Process Results Hermeticity (fine and gross leak) MIL-STD-202 Method 112, Cond. C & D Pass Acceleration, 30Kg, Y1 Direction MIL-STD-883 Method 2001 Cond. E Pass Vibration , 10-2000Hz sine, 20g, 3 axis MIL-STD-202 Method 204, Cond. D Pass Mechanical shock MIL-STD-202 Method 213, Cond . A Pass PIND 20G’s @130 Hz MIL-STD-750 Method 2052.2 Pass Temp Cycle -55C/+125C, 1000 Cycles MIL-STD-202 Method 107 Pass Autoclave, 121C, RH 100%, 15 Psig, 96 hrs JESD22-A102C Pass HTOL, 1000hrs, 105C at rated Voltage condition MIL-STD-202 Method 108, Cond . D Pass Bend Test JESD22-B113 Pass Resistance to soldering heat, 3x reflow, 260C peak JESD22-B102 Pass Drop Test JESD22-B111 Pass Adhesion Strength Push Test>10 lb Pass Qualification Testing