CMA-5043 MINI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Low Noise, High IP3 Monolithic Amplifier Page 1 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal Product Overview Mini-Circuits CMA-5043+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier operating from 50 MHz to 4 GHz with a unique combination of low noise and high IP3 making this amplifier ideal for sensitive high dynamic range receiver applications. This design operates on +3 to +5V supply at only 33 mA at 3V and 56mA at +5V, is internally matched to 50 ohms. The MMIC amplifier is bonded to a multilayer integrated LTCC substrate and then hermetically sealed under a controlled nitrogen atmosphere with gold-plated covers and eutectic AuSn solder. These amplifiers have been tested to MIL requirements for gross leak, fine leak, thermal shock, vibration, acceleration, mechanical shock, and HTOL. Key Features CMA-5043+ 50Ω 0.05 to 4 GHz Feature Advantages Ultra Low Noise: 0.75 dB at 1 GHz 0.98 dB at 2 GHz Outstanding Noise Figure, ideal for low noise input stages of receivers High IP3, 33.5 dBm Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low Noise Receiver Front End (RFE) because it gives the user advantages at both ends of the dynamic range: sensitivity & two-tone spur-free dynamic range High Output Power, +21 dBm The CMA-5043+ provides up to +21dBm output power at 1dB compression enabling this amplifier to support high linear dynamic range requirements Broad Band, up to 4 GHz Operating over a broadband from 50 MHz to 4 GHz, the CMA-5043+ covers the primary wireless communications bands: Cellular, PCS, LTE, WiMAX Internally Matched No external matching elements required to achieve the advertised noise and output power over the full band Ceramic Hermetic Package Low inductance, repeatable performance, excellent reliability High Reliability Low, small signal operating current of 53mA nominal maintains junction temperatures typically below 125°C at 85°C ground lead temperature Class 1B ESD (500V, HBM) The CMA-5043+ is a super low noise PHEMT based design. Unlike many other PHEMT designs. Mini-Circuits incorporates ESD protection on die to achieve industry leading ESD performance for a low noise amplifier
- Ceramic, Hermetically Sealed, Nitrogen filled
- Low profile case, .045” high
- Ultra Low Noise Figure, 0.75 dB
- High IP3 and Po at low DC power consumption
- Class 1B HBM ESD rating (500V) CASE STYLE: DL1721
Low Noise, High IP3 Monolithic Amplifier Page 2 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Product Features
- Ultra Low Noise Figure, 0.75 dB typ. at 1 GHz
- Gain, 18.4 dB typ. at 1GHz
- High Pout, P1dB up to 21 dBm typ.
- High IP3, up to 33.5 dBm typ. at 1 GHz
- Class 1B HBM ESD rating (500V)
- Small size - 3mm x 3mm x 1.14mm
- Ceramic, hermetic, Nitrogen filled
- No external matching components required Typical Applications
- Base station infrastructure
- Portable Wireless
- CATV & DBS
- MMDS & Wireless LAN
- LTE CMA-5043+ REV. B M155058 CMA-5043+ DJ/BT/CP 160222 0.05-4 GHz CASE STYLE: DL1721 Function Pad Number Description (See Application Circuit, Fig. 2) RF IN 2 RF input pin (connect to RF-IN via DC blocking cap) RF-OUT & DC-IN 7 RF output and bias pin. DC voltage is present on this pin; therefore a DC block- ing capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Rec- ommended Application Circuit”, Fig. 2 GND 1,3,4,5,6,8 Bottom Center Paddle Connections to ground: use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. * Enhancement mode pseudomorphic High Electron Mobility Transistor. simplified schematic and pad description General Description CMA-5043+ is an advanced wide band, high dynamic range, low noise, high IP3, high output power, monolithic amplifier. Manufactured using E-PHEMT* technology enables it to work with a single positive supply voltage. Terminal finish is Ni-Pd-Au and it has repeatable performance from lot to lot due to fully automated, tightly controlled semiconductor and assembly processes. +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications RF-IN (2) RF-OUT and DC-IN (7) GND (1,3,4,5,6,8) 1 4 3 2 8 5 6 7 GND RF In Gnd RF Out, DC Top View Gnd Gnd Gnd Gnd Gnd
Monolithic E-PHEMT MMIC Amplifier Page 3 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Electrical Specifications(1) at 25°C, Zo=50Ω, (refer to characterization circuit, Fig. 1) Absolute Maximum Ratings(4) Parameter Ratings Operating Temperature(5) -55°C to 105°C Storage Temperature -65°C to 125°C Channel Temperature 150°C DC Voltage 6V Device Current 76 mA Power Dissipation 380 mW Input Power (CW) 23 dBm (5 minutes max), 17dBm (continous) Parameter Condition (GHz) Vd=5.0V(1) Vd=3.0V(1) Units Frequency Range 0.05 4.0 0.05 4.0 GHz Noise Figure 0.05 — 0.73 — 0.66 dB 0.5 — 0.65 — 0.66 1.0 — 0.75 1.10 0.73 2.0 — 0.98 — 0.94 3.0 — 1.10 — 1.10 4.0 — 1.44 — 1.30 Gain 0.05 — 25.4 — 24.3 dB 0.5 — 22.1 — 21.2 2.0 — 13.3 — 12.5 3.0 — 10.2 — 9.6 4.0 — 8.0 — 7.2 Input Return Loss 0.05 7.8 6.5 dB 0.5 10.5 9.4 1.0 11.4 10.6 2.0 12.2 11.1 3.0 12.8 10.4 4.0 11.1 9.2 Output Return Loss 0.05 13.7 13.2 dB 0.5 15.0 15.9 1.0 13.9 15.1 2.0 12.5 14.5 3.0 11.7 13.3 4.0 12.8 15.7 Output Power @1dB compression (2) 0.05 18.9 15.8 dBm 0.5 19.3 16.5 1.0 19.8 17.4 2.0 20.7 19.0 3.0 21.2 19.4 4.0 21.5 19.8 Output IP3 0.05 31.0 28.0 dBm 0.5 32.1 28.0 1.0 33.5 28.7 2.0 32.7 30.0 3.0 33.6 31.0 4.0 32.6 31.0 DC Volts (Vd) 5.0 3.0 V DC Current (Id) 58 66 33 mA DC Current Variation Vs. Temp.(3) -0.007 -0.007 mA/°C DC Current Variation Vs. Voltage 0.01 0.01 mA/mV Thermal Resistance(4) 117 117 °C/W CMA-5043+ (1) Measured on Mini-Circuits Characterization test board TB-757+. See Characterization Test Circuit (Fig. 1) (2) Current increases at P1dB (3) (Current at 85°C - Current at -45°C)/130 PSA4-5043+ DC Current Vd=5V 47-49 49-51 51-53 53-55 55-57 57-59 59-61 61-63 63-65 65-67 >67 Current (mA) USL (4) Permanent damage may occur if any of these limits are exceeded. These maximum ratings are not intended for continuous normal operation. (5) Defined with reference to ground pad temperature.
Monolithic E-PHEMT MMIC Amplifier Page 4 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits CMA-5043+ Characterization Test Circuit Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-656-62+) Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/tone at output. Recommended Application Circuit Cblock IN Cblock Ibias OUT Vd RFC Cbypass Vcc 1,3,4,5,6,8 Paddle Fig 2. Test Board includes case, connectors, and components soldered to PCB for component values, please see evaluation board drawing. Product Marking MCL CMA- 5043+ DC YYWW Suggested PCB Layout (PL-366) ceramic body model RF-IN RF-OUT7 Vcc (Supply voltage) BLK-18+ Bias-Tee ZX85-12G-S+ DUT 1,3,4,5,6,8 Paddle +5V RF-IN RF-OUT7 Vcc (Supply voltage) BLK-18+ Bias-Tee ZX85-12G-S+ DUT 1,3,4,5,6,8 Paddle +5V TB-757+
Monolithic E-PHEMT MMIC Amplifier Page 5 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ESD Rating Human Body Model (HBM): Class 1B (500 to <1000V) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 (pass 35V) in accordance with ANSI/ESD STM5.2-1999 MSL Rating Moisture Sensitivity: MSL1 (these parts are hermetic, air cavity and therefore, MSL ratings do not strictly apply. For handling purpose, use MSL1) CMA-5043+ Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style DL1721 Ceramic package, exposed paddle, Terminla finish: NiPdAu Tape & Reel F66-1 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K, 2K devices. Suggested Layout for PCB Design PL-366 Evaluation Board TB-757+ Environmental Ratings ENV-68 Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Qualification Testing Test Description Test Method/Process Results 1 Hermeticity (fine and gross leak) MIL-STD-202 Method 112, Cond. C & D Pass 2 Acceleration, 30Kg, Y1 Direction MIL-STD-883 Method 2001 Cond. E Pass 3 Vibration , 10-2000Hz sine, 20g, 3 axis MIL-STD-202 Method 204, Cond. D Pass 4 Mechanical shock MIL-STD-202 Method 213, Cond . A Pass 5 PIND 20G’s @130 Hz MIL-STD-750 Method 2052.2 Pass
6 Temp Cycle -55C/+125C, 1000 Cycles MIL-STD-202 Method 107 Pass
7 Autoclave, 121C, RH 100%, 15 Psig, 96 hrs JESD22-A102C Pass
8 HTOL, 1000hrs, 105C at rated Voltage condition MIL-STD-202 Method 108, Cond . D Pass