DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS Your Perfect Inductor Rev.1801 CM9070F TYPE

  • FEATURE 1. Capable of handling the highest current(up to 5A) of any chip-type common mode filter 2. Noise is greatly suppressed.
  • Applications 1. Used for power line noise suppression for any electr ic devices. Used to counter adapter/battery line noise for relatively large electronic devices such as notebook , stand-alone word processor, etc.
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification Part number Common mode Impedance Z(Ω) at 100MHz DC Resistance (mΩ Max) Rated Current(A) Rated Voltage(V) Insulation Resistance (MΩ)Min min typical CM9070F-301 225 300 6 6 80 10 CM9070F-501 450 600 8 6 80 10 CM9070F-701 500 700 10 5 80 10 CM9070F-102 750 1000 13 4 80 10 CM9070F-152 1300 1500 15 3 80 10 Note1. Measurement ambient temperature of Impedance, DCR and IDC : at 25℃ Note2. Packing: reel ; Quantity: 700pcs/reel

FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS Your Perfect Inductor Rev.1801

  • Characteristics CM9070F-301 CM9070F-501 CM9070F-701 CM9070F-102 CM9070F-152 100 1000 10000 1 10 100 1000 Impedance(Ω) Frequency(MHz)

FENG-JUI TECHNOLOGY CO., LTD EMI SOLOTION PRODUCTS-RoHS Your Perfect Inductor Rev.1801 GENERAL CHARACTERISTICS 1. Operating temperatur e range: -40 TO + 105 (Inc℃ ludes temperature when the coil is heated) 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper plat e and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 5. 0N 60 sec. 4. Insulating resistance: Over 100M Ω at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdow n at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: I nductance coefficient (0~2,000)x10-6/ (℃ -25~+80 )℃ , inductance deviation within±5.0%, after 96 hours 7. Humidity characteristics(Moisture Resistance): Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2 and 1 hour drying under normal co℃ ndition. 8. Vibration resistance: Induc tance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5%, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260 , 10 seconds(See attached recommend reflow)℃ 11. Storage environment: Storage condition: Temper ature Range: 10 ~ 35 (Generally: 21 ~ 31 ) , ℃℃ ℃℃ Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range: -35 ~ 85 , Humidity Range: 50% ~ 95% RH℃℃ 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245℃ Peak 230℃ 170±10℃,60-120 S 300 250 200 150 100 T(℃) T(s) 300240180120600 Lead-free the recommended reflow condition